Utilização de resíduos da indústria galvanotécnica no desenvolvimento e fabricação de blocos de concreto para pavimentação intertravada
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) |
Texto Completo: | http://repositorio.uem.br:8080/jspui/handle/1/3690 |
Resumo: | The present work aimed to study the treatment/recycling of solid waste from the electroplating industry in the manufacture of concrete paving blocks, using the technique of stabilization/solidification in cement. Concrete blocks with different residues (blasting dust and galvanic sludge) (2%, 3%, 4%, 5% and 10%) in the substitution of fine aggregate were prepared. The blocks were subjected to physical, chemical, mechanical and microstructural tests for the assessment required to ensure good quality of the blocks, as for ensuring efficient removal/immobilization of contaminants in waste. The results obtained showed that the replacement of fine aggregate by up to 5% of blasting dust and 4% of galvanic sludge did not result in significant losses in the mechanical strength of the parts, nor lead to increased water absorption by the blocks. It has been found by chemical tests, there will be no problems of solubilization or leaching of contaminants during the useful life of the concrete blocks, since the process of solidification/stabilization leaded to physical and chemical immobilization of waste in cement mass. Thus, the use of blasting dust and electroplating sludge in manufacturing concrete paving blocks was feasible and effective, not only presenting itself as an alternative for the recycling and proper waste treatment, but also as a possibility of raw materials economy in the construction business. |
id |
UEM-10_166e9c6334ae1c5f6085f81804e5e58b |
---|---|
oai_identifier_str |
oai:localhost:1/3690 |
network_acronym_str |
UEM-10 |
network_name_str |
Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) |
repository_id_str |
|
spelling |
Utilização de resíduos da indústria galvanotécnica no desenvolvimento e fabricação de blocos de concreto para pavimentação intertravadaUtilization of electroplating waste in the development and manufacturing of interlocked concrete paving blocksBlocos de concretoResíduos industriaisIndústria galvânicaTratamento e aproveitamento de blocos de concretoBrasil.EngenhariasEngenharia QuímicaThe present work aimed to study the treatment/recycling of solid waste from the electroplating industry in the manufacture of concrete paving blocks, using the technique of stabilization/solidification in cement. Concrete blocks with different residues (blasting dust and galvanic sludge) (2%, 3%, 4%, 5% and 10%) in the substitution of fine aggregate were prepared. The blocks were subjected to physical, chemical, mechanical and microstructural tests for the assessment required to ensure good quality of the blocks, as for ensuring efficient removal/immobilization of contaminants in waste. The results obtained showed that the replacement of fine aggregate by up to 5% of blasting dust and 4% of galvanic sludge did not result in significant losses in the mechanical strength of the parts, nor lead to increased water absorption by the blocks. It has been found by chemical tests, there will be no problems of solubilization or leaching of contaminants during the useful life of the concrete blocks, since the process of solidification/stabilization leaded to physical and chemical immobilization of waste in cement mass. Thus, the use of blasting dust and electroplating sludge in manufacturing concrete paving blocks was feasible and effective, not only presenting itself as an alternative for the recycling and proper waste treatment, but also as a possibility of raw materials economy in the construction business.O presente trabalho teve como objetivo o estudo do tratamento/reaproveitamento de resíduos sólidos provenientes da indústria de galvanoplastia na fabricação de blocos de concreto para a pavimentação, utilizando-se a técnica de estabilização/solidificação em matrizes de cimento. Foram confeccionados blocos de concreto com diferentes teores de resíduos (poeira de jateamento e lodo galvânico) 2%, 3%, 4%, 5% e 10% em subsituição ao agregado miúdo. Esses blocos, posteriormente, foram submetidos a ensaios físicos, químicos, mecânicos e microestruturais para a avaliação, tanto das características necessárias à garantia de boa qualidade dos blocos, quanto para a garantia de uma eficiente remoção/imobilização dos contaminantes presentes nos resíduos. Os resultados obtidos permitiram verificar que a substituição do agregado miúdo por até 5% de poeira de jateamento e 4% de lodo galvânico não acarretou em perdas significativas na resistência mecânica das peças, nem levou ao aumento da absorção de água pelos blocos. Verificou-se ainda, por meio de ensaios químicos, que não haverá problemas de lixiviação ou solubilização de contaminantes no ambiente durante a vida útil dos blocos de concreto, uma vez que o processo de solidificação/estabilização levou à imobilização física e química dos resíduos na massa de cimento. Dessa forma, a utilização da poeira de jateamento e do lodo de galvanoplastia na fabricação de blocos de concreto para pavimentação mostrou-se viável e eficaz, apresentando-se não só como uma alternativa para o reaproveitamento e tratamento adequado desses resíduos, mas também como uma possibilidade de economia de matérias-primas utilizadas no ramo da construção civil.1 CD-ROM (184 f.)Universidade Estadual de MaringáBrasilDepartamento de Engenharia QuímicaPrograma de Pós-Graduação em Engenharia QuímicaUEMMaringá, PRCentro de TecnologiaCélia Regina Granhen TavaresCesar Fabiano Fioriti - UNESPEurica Mary Nogami - UEMCláudia Telles Benatti - UningáElenice Tavares Abreu - UEMSgorlon, Juliana Guerra2018-04-17T17:39:59Z2018-04-17T17:39:59Z2014info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesishttp://repositorio.uem.br:8080/jspui/handle/1/3690porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da Universidade Estadual de Maringá (RI-UEM)instname:Universidade Estadual de Maringá (UEM)instacron:UEM2018-10-15T18:18:39Zoai:localhost:1/3690Repositório InstitucionalPUBhttp://repositorio.uem.br:8080/oai/requestopendoar:2024-04-23T14:56:50.513119Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) - Universidade Estadual de Maringá (UEM)false |
dc.title.none.fl_str_mv |
Utilização de resíduos da indústria galvanotécnica no desenvolvimento e fabricação de blocos de concreto para pavimentação intertravada Utilization of electroplating waste in the development and manufacturing of interlocked concrete paving blocks |
title |
Utilização de resíduos da indústria galvanotécnica no desenvolvimento e fabricação de blocos de concreto para pavimentação intertravada |
spellingShingle |
Utilização de resíduos da indústria galvanotécnica no desenvolvimento e fabricação de blocos de concreto para pavimentação intertravada Sgorlon, Juliana Guerra Blocos de concreto Resíduos industriais Indústria galvânica Tratamento e aproveitamento de blocos de concreto Brasil. Engenharias Engenharia Química |
title_short |
Utilização de resíduos da indústria galvanotécnica no desenvolvimento e fabricação de blocos de concreto para pavimentação intertravada |
title_full |
Utilização de resíduos da indústria galvanotécnica no desenvolvimento e fabricação de blocos de concreto para pavimentação intertravada |
title_fullStr |
Utilização de resíduos da indústria galvanotécnica no desenvolvimento e fabricação de blocos de concreto para pavimentação intertravada |
title_full_unstemmed |
Utilização de resíduos da indústria galvanotécnica no desenvolvimento e fabricação de blocos de concreto para pavimentação intertravada |
title_sort |
Utilização de resíduos da indústria galvanotécnica no desenvolvimento e fabricação de blocos de concreto para pavimentação intertravada |
author |
Sgorlon, Juliana Guerra |
author_facet |
Sgorlon, Juliana Guerra |
author_role |
author |
dc.contributor.none.fl_str_mv |
Célia Regina Granhen Tavares Cesar Fabiano Fioriti - UNESP Eurica Mary Nogami - UEM Cláudia Telles Benatti - Uningá Elenice Tavares Abreu - UEM |
dc.contributor.author.fl_str_mv |
Sgorlon, Juliana Guerra |
dc.subject.por.fl_str_mv |
Blocos de concreto Resíduos industriais Indústria galvânica Tratamento e aproveitamento de blocos de concreto Brasil. Engenharias Engenharia Química |
topic |
Blocos de concreto Resíduos industriais Indústria galvânica Tratamento e aproveitamento de blocos de concreto Brasil. Engenharias Engenharia Química |
description |
The present work aimed to study the treatment/recycling of solid waste from the electroplating industry in the manufacture of concrete paving blocks, using the technique of stabilization/solidification in cement. Concrete blocks with different residues (blasting dust and galvanic sludge) (2%, 3%, 4%, 5% and 10%) in the substitution of fine aggregate were prepared. The blocks were subjected to physical, chemical, mechanical and microstructural tests for the assessment required to ensure good quality of the blocks, as for ensuring efficient removal/immobilization of contaminants in waste. The results obtained showed that the replacement of fine aggregate by up to 5% of blasting dust and 4% of galvanic sludge did not result in significant losses in the mechanical strength of the parts, nor lead to increased water absorption by the blocks. It has been found by chemical tests, there will be no problems of solubilization or leaching of contaminants during the useful life of the concrete blocks, since the process of solidification/stabilization leaded to physical and chemical immobilization of waste in cement mass. Thus, the use of blasting dust and electroplating sludge in manufacturing concrete paving blocks was feasible and effective, not only presenting itself as an alternative for the recycling and proper waste treatment, but also as a possibility of raw materials economy in the construction business. |
publishDate |
2014 |
dc.date.none.fl_str_mv |
2014 2018-04-17T17:39:59Z 2018-04-17T17:39:59Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://repositorio.uem.br:8080/jspui/handle/1/3690 |
url |
http://repositorio.uem.br:8080/jspui/handle/1/3690 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.publisher.none.fl_str_mv |
Universidade Estadual de Maringá Brasil Departamento de Engenharia Química Programa de Pós-Graduação em Engenharia Química UEM Maringá, PR Centro de Tecnologia |
publisher.none.fl_str_mv |
Universidade Estadual de Maringá Brasil Departamento de Engenharia Química Programa de Pós-Graduação em Engenharia Química UEM Maringá, PR Centro de Tecnologia |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) instname:Universidade Estadual de Maringá (UEM) instacron:UEM |
instname_str |
Universidade Estadual de Maringá (UEM) |
instacron_str |
UEM |
institution |
UEM |
reponame_str |
Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) |
collection |
Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) |
repository.name.fl_str_mv |
Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) - Universidade Estadual de Maringá (UEM) |
repository.mail.fl_str_mv |
|
_version_ |
1801841411238133760 |