Modelagem e simulação de um reator de pré-reforma de nafta
Autor(a) principal: | |
---|---|
Data de Publicação: | 2009 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) |
Texto Completo: | http://repositorio.uem.br:8080/jspui/handle/1/3786 |
Resumo: | The adiabatic prereforming of naphtha is a catalytic process that presents both economical and operational benefits. A model of this process is an important tool to be used for optimizing the operational conditions and for design purposes.Adiabatic prereforming of naphtha design with the commercial catalyst CRG, a nickel catalyst supported by alumina, was studied in an fixed bed industrial reactor. The temperatures were measured by thirty-two thermocouples placed in an axial thermowell in the bed of the reactor. Temperature and pressure in the entrance and exit of the prereformer were obtained directly from data already recorded existing in the Industrial Unit. The reactor operated during 42 months in the temperature range 440ºC-480ºC, with total pressure varying from 15 to 20 bar and steam-to-carbon ratio at the inlet equal to 3. One-dimensional pseudo-homogeneous mathematical model, steady state was developed. In this model, the kinetic expressions of the Reforming, Methanation and Shift reactions were included. Measured and calculated temperature profiles were obtained for several operation periods of the reactor. The simulated temperature profiles reproduced qualitatively the original tendency of the industrial data. A comparison between the calculated and measured values showed that the model formulated mispredictions the process gas temperature and molar flow rates at the pre-reformer outlet. The models studied showed the main trends of the process, but have proved uncapable of representing them quantitatively. This is believed to be due to inadequate when considering the kinetic characteristics of the pre-reform reactor from PERÓXIDOS DO BRASIL. |
id |
UEM-10_786adc24f63055227a50c509d063ba8f |
---|---|
oai_identifier_str |
oai:localhost:1/3786 |
network_acronym_str |
UEM-10 |
network_name_str |
Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) |
repository_id_str |
|
spelling |
Modelagem e simulação de um reator de pré-reforma de naftaProcesso de pré-reformaReator den Pré-reformaSimulaçãoModelagemPré-reforma adiabáticaNafta (Engenharia química)Brasil.EngenhariasEngenharia QuímicaThe adiabatic prereforming of naphtha is a catalytic process that presents both economical and operational benefits. A model of this process is an important tool to be used for optimizing the operational conditions and for design purposes.Adiabatic prereforming of naphtha design with the commercial catalyst CRG, a nickel catalyst supported by alumina, was studied in an fixed bed industrial reactor. The temperatures were measured by thirty-two thermocouples placed in an axial thermowell in the bed of the reactor. Temperature and pressure in the entrance and exit of the prereformer were obtained directly from data already recorded existing in the Industrial Unit. The reactor operated during 42 months in the temperature range 440ºC-480ºC, with total pressure varying from 15 to 20 bar and steam-to-carbon ratio at the inlet equal to 3. One-dimensional pseudo-homogeneous mathematical model, steady state was developed. In this model, the kinetic expressions of the Reforming, Methanation and Shift reactions were included. Measured and calculated temperature profiles were obtained for several operation periods of the reactor. The simulated temperature profiles reproduced qualitatively the original tendency of the industrial data. A comparison between the calculated and measured values showed that the model formulated mispredictions the process gas temperature and molar flow rates at the pre-reformer outlet. The models studied showed the main trends of the process, but have proved uncapable of representing them quantitatively. This is believed to be due to inadequate when considering the kinetic characteristics of the pre-reform reactor from PERÓXIDOS DO BRASIL.A pré-reforma adiabática de nafta é um processo com reação catalítica que implica em benefícios econômicos e operacionais, sendo que a modelagem do processo de pré-reforma é uma importante ferramenta a ser utilizada na otimização das condições operacionais e para fins de projeto. O processo de pré-reforma adiabática de nafta com o catalisador comercial CRG, cuja fase ativa é níquel suportado em alumina, foi estudado num reator industrial de leito fixo. As medidas de temperatura são fornecidas por trinta e dois termopares instalados axialmente no leito do reator. As temperaturas e pressões de entrada e de saída do pré-reformador foram obtidas diretamente dos registros de processo da Unidade Industrial. O reator operou num intervalo típico de temperatura que variou de 440 a 480°C com pressão total variando de 15 a 20 bar e razão molar na alimentação H2O/átomo-C igual a 3, durante uma campanha de 42 meses. Foram desenvolvidos modelos matemáticos pseudo-homogêneos, unidimensionais, em regime permanente com base em equações cinéticas. Foram obtidos os perfis de temperatura mediante simulação e os perfis de temperatura industriais para um único período de operação do reator. Os perfis de temperaturas simulados representaram a tendência dos dados industriais. A composição do efluente do reator obtida pela simulação de operação não apresentou uma boa estimativa das vazões molares de nafta, vapor, dióxido de carbono e metano presentes no produto, quando comparadas aos dados industriais. Os modelos estudados apresentaram as principais tendências do processo, mas revelaram-se incapazes de representá-lo quantitativamente. Acredita-se que seja devido ao equacionamento cinético inadequado para as características do processo de pré-reforma da PERÓXIDOS DO BRASIL.x, 89, 22 fUniversidade Estadual de MaringáBrasilPrograma de Pós-Graduação em Engenharia QuímicaUEMMaringá, PRDepartamento de Engenharia QuímicaLuiz Mario de Matos JorgeOnélia Aparecida Andreo dos Santos [Co-orientador] - UEMRegina Maria Matos Jorge [Co-orientador] - UEMGiane Gonçalves Lenzi - UEMPaulo Roberto Paraíso - UEMSousa, Leonardo César de2018-04-17T17:43:55Z2018-04-17T17:43:55Z2009info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesishttp://repositorio.uem.br:8080/jspui/handle/1/3786porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da Universidade Estadual de Maringá (RI-UEM)instname:Universidade Estadual de Maringá (UEM)instacron:UEM2024-04-15T16:13:20Zoai:localhost:1/3786Repositório InstitucionalPUBhttp://repositorio.uem.br:8080/oai/requestopendoar:2024-04-23T14:56:56.462039Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) - Universidade Estadual de Maringá (UEM)false |
dc.title.none.fl_str_mv |
Modelagem e simulação de um reator de pré-reforma de nafta |
title |
Modelagem e simulação de um reator de pré-reforma de nafta |
spellingShingle |
Modelagem e simulação de um reator de pré-reforma de nafta Sousa, Leonardo César de Processo de pré-reforma Reator den Pré-reforma Simulação Modelagem Pré-reforma adiabática Nafta (Engenharia química) Brasil. Engenharias Engenharia Química |
title_short |
Modelagem e simulação de um reator de pré-reforma de nafta |
title_full |
Modelagem e simulação de um reator de pré-reforma de nafta |
title_fullStr |
Modelagem e simulação de um reator de pré-reforma de nafta |
title_full_unstemmed |
Modelagem e simulação de um reator de pré-reforma de nafta |
title_sort |
Modelagem e simulação de um reator de pré-reforma de nafta |
author |
Sousa, Leonardo César de |
author_facet |
Sousa, Leonardo César de |
author_role |
author |
dc.contributor.none.fl_str_mv |
Luiz Mario de Matos Jorge Onélia Aparecida Andreo dos Santos [Co-orientador] - UEM Regina Maria Matos Jorge [Co-orientador] - UEM Giane Gonçalves Lenzi - UEM Paulo Roberto Paraíso - UEM |
dc.contributor.author.fl_str_mv |
Sousa, Leonardo César de |
dc.subject.por.fl_str_mv |
Processo de pré-reforma Reator den Pré-reforma Simulação Modelagem Pré-reforma adiabática Nafta (Engenharia química) Brasil. Engenharias Engenharia Química |
topic |
Processo de pré-reforma Reator den Pré-reforma Simulação Modelagem Pré-reforma adiabática Nafta (Engenharia química) Brasil. Engenharias Engenharia Química |
description |
The adiabatic prereforming of naphtha is a catalytic process that presents both economical and operational benefits. A model of this process is an important tool to be used for optimizing the operational conditions and for design purposes.Adiabatic prereforming of naphtha design with the commercial catalyst CRG, a nickel catalyst supported by alumina, was studied in an fixed bed industrial reactor. The temperatures were measured by thirty-two thermocouples placed in an axial thermowell in the bed of the reactor. Temperature and pressure in the entrance and exit of the prereformer were obtained directly from data already recorded existing in the Industrial Unit. The reactor operated during 42 months in the temperature range 440ºC-480ºC, with total pressure varying from 15 to 20 bar and steam-to-carbon ratio at the inlet equal to 3. One-dimensional pseudo-homogeneous mathematical model, steady state was developed. In this model, the kinetic expressions of the Reforming, Methanation and Shift reactions were included. Measured and calculated temperature profiles were obtained for several operation periods of the reactor. The simulated temperature profiles reproduced qualitatively the original tendency of the industrial data. A comparison between the calculated and measured values showed that the model formulated mispredictions the process gas temperature and molar flow rates at the pre-reformer outlet. The models studied showed the main trends of the process, but have proved uncapable of representing them quantitatively. This is believed to be due to inadequate when considering the kinetic characteristics of the pre-reform reactor from PERÓXIDOS DO BRASIL. |
publishDate |
2009 |
dc.date.none.fl_str_mv |
2009 2018-04-17T17:43:55Z 2018-04-17T17:43:55Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
http://repositorio.uem.br:8080/jspui/handle/1/3786 |
url |
http://repositorio.uem.br:8080/jspui/handle/1/3786 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.publisher.none.fl_str_mv |
Universidade Estadual de Maringá Brasil Programa de Pós-Graduação em Engenharia Química UEM Maringá, PR Departamento de Engenharia Química |
publisher.none.fl_str_mv |
Universidade Estadual de Maringá Brasil Programa de Pós-Graduação em Engenharia Química UEM Maringá, PR Departamento de Engenharia Química |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) instname:Universidade Estadual de Maringá (UEM) instacron:UEM |
instname_str |
Universidade Estadual de Maringá (UEM) |
instacron_str |
UEM |
institution |
UEM |
reponame_str |
Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) |
collection |
Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) |
repository.name.fl_str_mv |
Repositório Institucional da Universidade Estadual de Maringá (RI-UEM) - Universidade Estadual de Maringá (UEM) |
repository.mail.fl_str_mv |
|
_version_ |
1801841411507617792 |