Substituição total e parcial do quartzo por fontes alternativas de alumina na formulação e porcelanas.
Autor(a) principal: | |
---|---|
Data de Publicação: | 2012 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UEPG |
Texto Completo: | http://tede2.uepg.br/jspui/handle/prefix/1417 |
Resumo: | The porcelains are multiphase materials produced with natural raw materials, containing less than 0.5% of residual porosity and having more than 10% volume of a glassy phase. The main porcelains are composed of kaolin-quartz-feldspar which are called triaxial porcelains. The use of alumina as a substitute for quartz in the porcelain in of these formulations has been developed for some time. The results show a significant improvement in their mechanical properties, but alumina has a high cost compared with other raw materials. The study of the possibility of using alternative materials, that is also a source of alumina and with lower cost is quite important. In this work, quartz was substituted , in the formulation of triaxial porcelain, for alumina originating from the metallurgical process of aluminum in its various stages, beginning with the bauxite, followed by aluminum hydroxide obtained by two distinct processes (Reprecipitation and Bayer) and finally the alumina. The total and partial replacement was to evaluate the influence of quartz and raw materials in the formation of phases and mechanical properties of triaxial porcelain. The compositions studied were formed by pressing and sintered at different temperatures. The characterization of the porcelain was made by scanning electron microscopy, X-ray diffraction, mechanical strength by three point bending and measures of density, porosity and water absorption. The results showed that the use of raw bauxite, aluminum hydroxide and aluminum hydroxide Bayer reprecipitated as an alternative source of Al2O3 is viable and there is a considerable increase of mechanical strength both in partial replacement as in the substitution of quartz. |
id |
UEPG_1da222bccc0f146232c99cb93cfb0761 |
---|---|
oai_identifier_str |
oai:tede2.uepg.br:prefix/1417 |
network_acronym_str |
UEPG |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UEPG |
repository_id_str |
|
spelling |
Chinelatto, Adriana Scoton AntônioCPF:13967937801http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4721108U7Pianaro, Sidnei AntonioCPF:63221721900http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4782149Z6Thomazini, DanielCPF:24800559812http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4701320T6CPF:00429224966http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4248071J0Gralik, Guilherme2017-07-21T20:42:37Z2013-02-052017-07-21T20:42:37Z2012-08-08GRALIK, Guilherme. Substituição total e parcial do quartzo por fontes alternativas de alumina na formulação e porcelanas.. 2012. 106 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2012.http://tede2.uepg.br/jspui/handle/prefix/1417The porcelains are multiphase materials produced with natural raw materials, containing less than 0.5% of residual porosity and having more than 10% volume of a glassy phase. The main porcelains are composed of kaolin-quartz-feldspar which are called triaxial porcelains. The use of alumina as a substitute for quartz in the porcelain in of these formulations has been developed for some time. The results show a significant improvement in their mechanical properties, but alumina has a high cost compared with other raw materials. The study of the possibility of using alternative materials, that is also a source of alumina and with lower cost is quite important. In this work, quartz was substituted , in the formulation of triaxial porcelain, for alumina originating from the metallurgical process of aluminum in its various stages, beginning with the bauxite, followed by aluminum hydroxide obtained by two distinct processes (Reprecipitation and Bayer) and finally the alumina. The total and partial replacement was to evaluate the influence of quartz and raw materials in the formation of phases and mechanical properties of triaxial porcelain. The compositions studied were formed by pressing and sintered at different temperatures. The characterization of the porcelain was made by scanning electron microscopy, X-ray diffraction, mechanical strength by three point bending and measures of density, porosity and water absorption. The results showed that the use of raw bauxite, aluminum hydroxide and aluminum hydroxide Bayer reprecipitated as an alternative source of Al2O3 is viable and there is a considerable increase of mechanical strength both in partial replacement as in the substitution of quartz.As principais porcelanas são as compostas por caulim-feldspato-quartzo as quais recebem o nome de porcelanas triaxiais. A utilização da alumina como substituto do quartzo nas formulações dessas porcelanas vem sendo desenvolvida já há algum tempo. Os resultados mostram uma grande melhoria nas suas propriedades mecânicas, mas a alumina ainda tem um custo bastante elevado comparado com outras matérias-primas. O estudo da possibilidade do uso de matérias-primas alternativas, que também sejam fontes de alumina é bastante importante. Assim, neste trabalho o quartzo foi substituído, na formulação de uma porcelana triaxial, por alumina oriunda do processo metalúrgico do alumínio em suas diversas etapas, começando com a bauxita, seguido do hidróxido de alumínio obtido por dois processos distintos (Reprecipitação e Bayer) e finalmente pela alumina. A substituição foi total e parcial para melhor avaliar a influência do quartzo e das matérias-primas na formação das fases e nas propriedades mecânicas das porcelanas triaxiais. As composições estudadas foram conformadas por prensagem e sinterizadas em diferentes temperaturas. A caracterização dasporcelanas foi feita por microscopia eletrônica de varredura, difração de raios X, resistência mecânica à flexão em três pontos e medidas de densidade aparente, porosidade aparente e absorção de água. Os resultados mostraram que a utilização das matérias-primas bauxita, hidróxidos de alumínio Bayer e hidróxido de alumínio reprecipitado, como fonte alternativade Al2O3 é viável e ocorre um aumento considerável da resistência mecânica, tanto na substituição parcial como na substituição total do quartzo. Palavras chave: porcelana, alumina, microestrutura, resistência mecânica, quartzo.Made available in DSpace on 2017-07-21T20:42:37Z (GMT). No. of bitstreams: 1 Guilherme Gralik.pdf: 15694789 bytes, checksum: 46d9955a777f2f852ddacabc2dfd661e (MD5) Previous issue date: 2012-08-08application/pdfporUNIVERSIDADE ESTADUAL DE PONTA GROSSAPrograma de Pós-Graduação em Engenharia e Ciências de MateriaisUEPGBRDesenvolvimento e Caracterização de Materiaisporcelanaaluminamicroestruturaresistência mecânicaquartzoporcelainaluminamicrostructuremechanical strengthquartzCNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICASubstituição total e parcial do quartzo por fontes alternativas de alumina na formulação e porcelanas.info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UEPGinstname:Universidade Estadual de Ponta Grossa (UEPG)instacron:UEPGORIGINALGuilherme Gralik.pdfapplication/pdf15694789http://tede2.uepg.br/jspui/bitstream/prefix/1417/1/Guilherme%20Gralik.pdf46d9955a777f2f852ddacabc2dfd661eMD51prefix/14172017-07-21 17:42:37.971oai:tede2.uepg.br:prefix/1417Biblioteca Digital de Teses e Dissertaçõeshttps://tede2.uepg.br/jspui/PUBhttp://tede2.uepg.br/oai/requestbicen@uepg.br||mv_fidelis@yahoo.com.bropendoar:2017-07-21T20:42:37Biblioteca Digital de Teses e Dissertações da UEPG - Universidade Estadual de Ponta Grossa (UEPG)false |
dc.title.por.fl_str_mv |
Substituição total e parcial do quartzo por fontes alternativas de alumina na formulação e porcelanas. |
title |
Substituição total e parcial do quartzo por fontes alternativas de alumina na formulação e porcelanas. |
spellingShingle |
Substituição total e parcial do quartzo por fontes alternativas de alumina na formulação e porcelanas. Gralik, Guilherme porcelana alumina microestrutura resistência mecânica quartzo porcelain alumina microstructure mechanical strength quartz CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
title_short |
Substituição total e parcial do quartzo por fontes alternativas de alumina na formulação e porcelanas. |
title_full |
Substituição total e parcial do quartzo por fontes alternativas de alumina na formulação e porcelanas. |
title_fullStr |
Substituição total e parcial do quartzo por fontes alternativas de alumina na formulação e porcelanas. |
title_full_unstemmed |
Substituição total e parcial do quartzo por fontes alternativas de alumina na formulação e porcelanas. |
title_sort |
Substituição total e parcial do quartzo por fontes alternativas de alumina na formulação e porcelanas. |
author |
Gralik, Guilherme |
author_facet |
Gralik, Guilherme |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Chinelatto, Adriana Scoton Antônio |
dc.contributor.advisor1ID.fl_str_mv |
CPF:13967937801 |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4721108U7 |
dc.contributor.referee1.fl_str_mv |
Pianaro, Sidnei Antonio |
dc.contributor.referee1ID.fl_str_mv |
CPF:63221721900 |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4782149Z6 |
dc.contributor.referee2.fl_str_mv |
Thomazini, Daniel |
dc.contributor.referee2ID.fl_str_mv |
CPF:24800559812 |
dc.contributor.referee2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4701320T6 |
dc.contributor.authorID.fl_str_mv |
CPF:00429224966 |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4248071J0 |
dc.contributor.author.fl_str_mv |
Gralik, Guilherme |
contributor_str_mv |
Chinelatto, Adriana Scoton Antônio Pianaro, Sidnei Antonio Thomazini, Daniel |
dc.subject.por.fl_str_mv |
porcelana alumina microestrutura resistência mecânica quartzo |
topic |
porcelana alumina microestrutura resistência mecânica quartzo porcelain alumina microstructure mechanical strength quartz CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
dc.subject.eng.fl_str_mv |
porcelain alumina microstructure mechanical strength quartz |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
description |
The porcelains are multiphase materials produced with natural raw materials, containing less than 0.5% of residual porosity and having more than 10% volume of a glassy phase. The main porcelains are composed of kaolin-quartz-feldspar which are called triaxial porcelains. The use of alumina as a substitute for quartz in the porcelain in of these formulations has been developed for some time. The results show a significant improvement in their mechanical properties, but alumina has a high cost compared with other raw materials. The study of the possibility of using alternative materials, that is also a source of alumina and with lower cost is quite important. In this work, quartz was substituted , in the formulation of triaxial porcelain, for alumina originating from the metallurgical process of aluminum in its various stages, beginning with the bauxite, followed by aluminum hydroxide obtained by two distinct processes (Reprecipitation and Bayer) and finally the alumina. The total and partial replacement was to evaluate the influence of quartz and raw materials in the formation of phases and mechanical properties of triaxial porcelain. The compositions studied were formed by pressing and sintered at different temperatures. The characterization of the porcelain was made by scanning electron microscopy, X-ray diffraction, mechanical strength by three point bending and measures of density, porosity and water absorption. The results showed that the use of raw bauxite, aluminum hydroxide and aluminum hydroxide Bayer reprecipitated as an alternative source of Al2O3 is viable and there is a considerable increase of mechanical strength both in partial replacement as in the substitution of quartz. |
publishDate |
2012 |
dc.date.issued.fl_str_mv |
2012-08-08 |
dc.date.available.fl_str_mv |
2013-02-05 2017-07-21T20:42:37Z |
dc.date.accessioned.fl_str_mv |
2017-07-21T20:42:37Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
GRALIK, Guilherme. Substituição total e parcial do quartzo por fontes alternativas de alumina na formulação e porcelanas.. 2012. 106 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2012. |
dc.identifier.uri.fl_str_mv |
http://tede2.uepg.br/jspui/handle/prefix/1417 |
identifier_str_mv |
GRALIK, Guilherme. Substituição total e parcial do quartzo por fontes alternativas de alumina na formulação e porcelanas.. 2012. 106 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2012. |
url |
http://tede2.uepg.br/jspui/handle/prefix/1417 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
UNIVERSIDADE ESTADUAL DE PONTA GROSSA |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia e Ciências de Materiais |
dc.publisher.initials.fl_str_mv |
UEPG |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Desenvolvimento e Caracterização de Materiais |
publisher.none.fl_str_mv |
UNIVERSIDADE ESTADUAL DE PONTA GROSSA |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UEPG instname:Universidade Estadual de Ponta Grossa (UEPG) instacron:UEPG |
instname_str |
Universidade Estadual de Ponta Grossa (UEPG) |
instacron_str |
UEPG |
institution |
UEPG |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UEPG |
collection |
Biblioteca Digital de Teses e Dissertações da UEPG |
bitstream.url.fl_str_mv |
http://tede2.uepg.br/jspui/bitstream/prefix/1417/1/Guilherme%20Gralik.pdf |
bitstream.checksum.fl_str_mv |
46d9955a777f2f852ddacabc2dfd661e |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UEPG - Universidade Estadual de Ponta Grossa (UEPG) |
repository.mail.fl_str_mv |
bicen@uepg.br||mv_fidelis@yahoo.com.br |
_version_ |
1800232801357791232 |