OBTENÇÃO DE CARVÃO ATIVADO A PARTIR DE RESÍDUOS AGROINDUSTRIAIS PARA ADSORÇÃO DE ANTIBIÓTICO – AMOXICILINA

Detalhes bibliográficos
Autor(a) principal: Schultz, Juliana
Data de Publicação: 2012
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Biblioteca Digital de Teses e Dissertações da UEPG
Texto Completo: http://tede2.uepg.br/jspui/handle/prefix/1419
Resumo: There is great concern for society as a whole with the waste generation without proper treatment, knowing that can cause disorders. The Brazil is a major producer of agro-industrial, and this waste generation is very large and often and this material doesn’t have an appropriate destination. This work uses an agro-industrial residue very common in the Brazil, for the production of activated carbon, a material that is widely used as adsorbent in the industry. As a precursor, was used the sugar cane bagasse and activation, the chemical reagent ZnCl2 (proportion 1:2). The mean time was 14 hours impregnation and carbonization, was used a heating rate of 3°C/min until the temperature of 250C, with a level of 30 minutes at this temperature, then the temperature was increased to 600C at a rate of 5C/min level this heating for 1 hour at that temperature. The samples were characterized by MEV and BET. They had an average specific surface area mean of 1.501,3 m2/g and an average pore size of 2.6 nm. Tests for adsorption of the antibiotic amoxicillin were performed by two different methods, namely, with magnetic stirrer and column. The two methods showed very satisfactory results, reducing the concentration of antibiotic 10% (1.37,10-3 mol/L) to about 9.95,10-8 mol/L test with magnetic stirrer and 3.53,10-8 mol/L column test, i.e. the concentration of antibiotic in water, after adsorption was reduced by five orders of magnitude, confirmed the efficiency of the nanostructured material of carbon developed here for the removal of residual antibiotic environment.
id UEPG_4a2824479d902f05229ed12348871464
oai_identifier_str oai:tede2.uepg.br:prefix/1419
network_acronym_str UEPG
network_name_str Biblioteca Digital de Teses e Dissertações da UEPG
repository_id_str
spelling Pianaro, Sidnei AntonioCPF:63221721900http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4782149Z6Capobianco, GinoCPF:00821339800http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4792754A6Kubaski, Evaldo TonioloCPF:02960945956http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4709616P9Zara, Alfredo JoséCPF:96384328887http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787200T6CPF:06530526935http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4201352U6Schultz, Juliana2017-07-21T20:42:38Z2013-02-192017-07-21T20:42:38Z2012-07-06SCHULTZ, Juliana. OBTENÇÃO DE CARVÃO ATIVADO A PARTIR DE RESÍDUOS AGROINDUSTRIAIS PARA ADSORÇÃO DE ANTIBIÓTICO – AMOXICILINA. 2012. 50 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2012.http://tede2.uepg.br/jspui/handle/prefix/1419There is great concern for society as a whole with the waste generation without proper treatment, knowing that can cause disorders. The Brazil is a major producer of agro-industrial, and this waste generation is very large and often and this material doesn’t have an appropriate destination. This work uses an agro-industrial residue very common in the Brazil, for the production of activated carbon, a material that is widely used as adsorbent in the industry. As a precursor, was used the sugar cane bagasse and activation, the chemical reagent ZnCl2 (proportion 1:2). The mean time was 14 hours impregnation and carbonization, was used a heating rate of 3°C/min until the temperature of 250C, with a level of 30 minutes at this temperature, then the temperature was increased to 600C at a rate of 5C/min level this heating for 1 hour at that temperature. The samples were characterized by MEV and BET. They had an average specific surface area mean of 1.501,3 m2/g and an average pore size of 2.6 nm. Tests for adsorption of the antibiotic amoxicillin were performed by two different methods, namely, with magnetic stirrer and column. The two methods showed very satisfactory results, reducing the concentration of antibiotic 10% (1.37,10-3 mol/L) to about 9.95,10-8 mol/L test with magnetic stirrer and 3.53,10-8 mol/L column test, i.e. the concentration of antibiotic in water, after adsorption was reduced by five orders of magnitude, confirmed the efficiency of the nanostructured material of carbon developed here for the removal of residual antibiotic environment.Há uma grande preocupação por parte da sociedade como um todo com a geração de resíduos sem um tratamento adequado, por saber dos transtornos que podem ocasionar. O Brasil é um grande produtor agroindustrial, com isso a geração de resíduos é muito grande e, muitas vezes, esse material não tem destino adequado. Este trabalho utiliza um resíduo agroindustrial muito comum no Brasil, para a produção de carvão ativado, material que tem muita utilização como adsorvente na indústria. Como precursor, utilizou-se o bagaço de cana e para a ativação, o reagente químico ZnCl2 (proporção 1:2). O tempo médio de impregnação foi de 14 horas e para carbonização, utilizou-se uma taxa de aquecimento de 3C/min até a temperatura de 250C, com patamar de 30 minutos nessa temperatura, logo, a temperatura foi aumentada até 600oC a uma taxa de aquecimento de 5C/min com patamar de 1 hora nessa temperatura. As amostras foram caracterizadas por MEV e BET. Apresentaram uma área superficial específica média de 1501,3 m2/g e tamanho médio de poros de 2,6 nm. Os testes de adsorção do antibiótico amoxicilina foram realizados por dois métodos diferentes, a saber: com agitador magnético e em coluna. Os dois métodos apresentaram resultados muito satisfatórios, reduzindo a concentração do antibiótico de 10% (1,37.10-3 mol/L) para em torno de 9,95.10-8 mol/L no teste com agitador magnético e 3,53.10-8 mol/L no teste em coluna, ou seja a concentração do antibiótico em água, após a adsorção, foi reduzida em cinco ordens de magnitude, comprovado a eficiência do material nanoestruturado de carbono desenvolvido neste trabalho na remoção de antibiótico residual do meio ambiente.Made available in DSpace on 2017-07-21T20:42:38Z (GMT). No. of bitstreams: 1 Juliana Schultz.pdf: 2166644 bytes, checksum: abe9199d57a29d6f3d6f49ca3e41ce72 (MD5) Previous issue date: 2012-07-06Conselho Nacional de Desenvolvimento Científico e Tecnológicoapplication/pdfporUNIVERSIDADE ESTADUAL DE PONTA GROSSAPrograma de Pós-Graduação em Engenharia e Ciências de MateriaisUEPGBRDesenvolvimento e Caracterização de Materiaiscarvão ativadoresíduo agroindustrialantibióticoactivated carbonagro wasteantibioticsCNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICAOBTENÇÃO DE CARVÃO ATIVADO A PARTIR DE RESÍDUOS AGROINDUSTRIAIS PARA ADSORÇÃO DE ANTIBIÓTICO – AMOXICILINAinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UEPGinstname:Universidade Estadual de Ponta Grossa (UEPG)instacron:UEPGORIGINALJuliana Schultz.pdfapplication/pdf2166644http://tede2.uepg.br/jspui/bitstream/prefix/1419/1/Juliana%20Schultz.pdfabe9199d57a29d6f3d6f49ca3e41ce72MD51prefix/14192017-07-21 17:42:38.39oai:tede2.uepg.br:prefix/1419Biblioteca Digital de Teses e Dissertaçõeshttps://tede2.uepg.br/jspui/PUBhttp://tede2.uepg.br/oai/requestbicen@uepg.br||mv_fidelis@yahoo.com.bropendoar:2017-07-21T20:42:38Biblioteca Digital de Teses e Dissertações da UEPG - Universidade Estadual de Ponta Grossa (UEPG)false
dc.title.por.fl_str_mv OBTENÇÃO DE CARVÃO ATIVADO A PARTIR DE RESÍDUOS AGROINDUSTRIAIS PARA ADSORÇÃO DE ANTIBIÓTICO – AMOXICILINA
title OBTENÇÃO DE CARVÃO ATIVADO A PARTIR DE RESÍDUOS AGROINDUSTRIAIS PARA ADSORÇÃO DE ANTIBIÓTICO – AMOXICILINA
spellingShingle OBTENÇÃO DE CARVÃO ATIVADO A PARTIR DE RESÍDUOS AGROINDUSTRIAIS PARA ADSORÇÃO DE ANTIBIÓTICO – AMOXICILINA
Schultz, Juliana
carvão ativado
resíduo agroindustrial
antibiótico
activated carbon
agro waste
antibiotics
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA
title_short OBTENÇÃO DE CARVÃO ATIVADO A PARTIR DE RESÍDUOS AGROINDUSTRIAIS PARA ADSORÇÃO DE ANTIBIÓTICO – AMOXICILINA
title_full OBTENÇÃO DE CARVÃO ATIVADO A PARTIR DE RESÍDUOS AGROINDUSTRIAIS PARA ADSORÇÃO DE ANTIBIÓTICO – AMOXICILINA
title_fullStr OBTENÇÃO DE CARVÃO ATIVADO A PARTIR DE RESÍDUOS AGROINDUSTRIAIS PARA ADSORÇÃO DE ANTIBIÓTICO – AMOXICILINA
title_full_unstemmed OBTENÇÃO DE CARVÃO ATIVADO A PARTIR DE RESÍDUOS AGROINDUSTRIAIS PARA ADSORÇÃO DE ANTIBIÓTICO – AMOXICILINA
title_sort OBTENÇÃO DE CARVÃO ATIVADO A PARTIR DE RESÍDUOS AGROINDUSTRIAIS PARA ADSORÇÃO DE ANTIBIÓTICO – AMOXICILINA
author Schultz, Juliana
author_facet Schultz, Juliana
author_role author
dc.contributor.advisor1.fl_str_mv Pianaro, Sidnei Antonio
dc.contributor.advisor1ID.fl_str_mv CPF:63221721900
dc.contributor.advisor1Lattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4782149Z6
dc.contributor.advisor-co1.fl_str_mv Capobianco, Gino
dc.contributor.advisor-co1ID.fl_str_mv CPF:00821339800
dc.contributor.advisor-co1Lattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4792754A6
dc.contributor.referee1.fl_str_mv Kubaski, Evaldo Toniolo
dc.contributor.referee1ID.fl_str_mv CPF:02960945956
dc.contributor.referee1Lattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4709616P9
dc.contributor.referee2.fl_str_mv Zara, Alfredo José
dc.contributor.referee2ID.fl_str_mv CPF:96384328887
dc.contributor.referee2Lattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4787200T6
dc.contributor.authorID.fl_str_mv CPF:06530526935
dc.contributor.authorLattes.fl_str_mv http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4201352U6
dc.contributor.author.fl_str_mv Schultz, Juliana
contributor_str_mv Pianaro, Sidnei Antonio
Capobianco, Gino
Kubaski, Evaldo Toniolo
Zara, Alfredo José
dc.subject.por.fl_str_mv carvão ativado
resíduo agroindustrial
antibiótico
topic carvão ativado
resíduo agroindustrial
antibiótico
activated carbon
agro waste
antibiotics
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA
dc.subject.eng.fl_str_mv activated carbon
agro waste
antibiotics
dc.subject.cnpq.fl_str_mv CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA
description There is great concern for society as a whole with the waste generation without proper treatment, knowing that can cause disorders. The Brazil is a major producer of agro-industrial, and this waste generation is very large and often and this material doesn’t have an appropriate destination. This work uses an agro-industrial residue very common in the Brazil, for the production of activated carbon, a material that is widely used as adsorbent in the industry. As a precursor, was used the sugar cane bagasse and activation, the chemical reagent ZnCl2 (proportion 1:2). The mean time was 14 hours impregnation and carbonization, was used a heating rate of 3°C/min until the temperature of 250C, with a level of 30 minutes at this temperature, then the temperature was increased to 600C at a rate of 5C/min level this heating for 1 hour at that temperature. The samples were characterized by MEV and BET. They had an average specific surface area mean of 1.501,3 m2/g and an average pore size of 2.6 nm. Tests for adsorption of the antibiotic amoxicillin were performed by two different methods, namely, with magnetic stirrer and column. The two methods showed very satisfactory results, reducing the concentration of antibiotic 10% (1.37,10-3 mol/L) to about 9.95,10-8 mol/L test with magnetic stirrer and 3.53,10-8 mol/L column test, i.e. the concentration of antibiotic in water, after adsorption was reduced by five orders of magnitude, confirmed the efficiency of the nanostructured material of carbon developed here for the removal of residual antibiotic environment.
publishDate 2012
dc.date.issued.fl_str_mv 2012-07-06
dc.date.available.fl_str_mv 2013-02-19
2017-07-21T20:42:38Z
dc.date.accessioned.fl_str_mv 2017-07-21T20:42:38Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv SCHULTZ, Juliana. OBTENÇÃO DE CARVÃO ATIVADO A PARTIR DE RESÍDUOS AGROINDUSTRIAIS PARA ADSORÇÃO DE ANTIBIÓTICO – AMOXICILINA. 2012. 50 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2012.
dc.identifier.uri.fl_str_mv http://tede2.uepg.br/jspui/handle/prefix/1419
identifier_str_mv SCHULTZ, Juliana. OBTENÇÃO DE CARVÃO ATIVADO A PARTIR DE RESÍDUOS AGROINDUSTRIAIS PARA ADSORÇÃO DE ANTIBIÓTICO – AMOXICILINA. 2012. 50 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2012.
url http://tede2.uepg.br/jspui/handle/prefix/1419
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv UNIVERSIDADE ESTADUAL DE PONTA GROSSA
dc.publisher.program.fl_str_mv Programa de Pós-Graduação em Engenharia e Ciências de Materiais
dc.publisher.initials.fl_str_mv UEPG
dc.publisher.country.fl_str_mv BR
dc.publisher.department.fl_str_mv Desenvolvimento e Caracterização de Materiais
publisher.none.fl_str_mv UNIVERSIDADE ESTADUAL DE PONTA GROSSA
dc.source.none.fl_str_mv reponame:Biblioteca Digital de Teses e Dissertações da UEPG
instname:Universidade Estadual de Ponta Grossa (UEPG)
instacron:UEPG
instname_str Universidade Estadual de Ponta Grossa (UEPG)
instacron_str UEPG
institution UEPG
reponame_str Biblioteca Digital de Teses e Dissertações da UEPG
collection Biblioteca Digital de Teses e Dissertações da UEPG
bitstream.url.fl_str_mv http://tede2.uepg.br/jspui/bitstream/prefix/1419/1/Juliana%20Schultz.pdf
bitstream.checksum.fl_str_mv abe9199d57a29d6f3d6f49ca3e41ce72
bitstream.checksumAlgorithm.fl_str_mv MD5
repository.name.fl_str_mv Biblioteca Digital de Teses e Dissertações da UEPG - Universidade Estadual de Ponta Grossa (UEPG)
repository.mail.fl_str_mv bicen@uepg.br||mv_fidelis@yahoo.com.br
_version_ 1800232801370374144