ESTUDO COMPARATIVO DA ATIVAÇÃO MECÂNICA POR MOINHOS DE ALTA ENERGIA E CARACTERIZAÇÃO DOS PRODUTOS OBTIDOS DURANTE REAÇÃO DE REDUÇÃO DO ÓXIDO DE CROMO POR ALUMÍNIO
Autor(a) principal: | |
---|---|
Data de Publicação: | 2015 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UEPG |
Texto Completo: | http://tede2.uepg.br/jspui/handle/prefix/1470 |
Resumo: | This study aims to compare the supply capacity of power each of the three main types of high-energy mills: The "SPEX", Planetary and "Attritor" mills. The system used was chromium oxide with metallic aluminum, both are powders. The reduction reaction of chromium oxide with aluminum in the milling does not occur instantaneously, but is stimulated with mechanical activation of the reagents. The mechanical activation in milling, together with the subsequent heat treatment is that makes a reaction. The energy comparison was made between the mill in two steps: In the first step the milling power was varied for the three mills to be able to identify the milling resulted in the highest exotermic energy peak in the reaction, whereas in the second stage ranged -if the time for milling time find themselves exhibited higher energy released in the reaction. This comparison between the reaction energy peaks confirmed the SPEX as the mill with greater power supply capacity, ie: The mill with the largest peak energy released, followed by the Planetary mill and finally by Attritor mill. In the energy comparison, we studied the influence of the presence of a process control agent in the reaction energy peaks at different milling powers. The milled samples had their power surges reaction determined by thermal analysis of the post. This energy released in the process varied, tending to exhibit a higher peak energy for each of the evaluated parameters (milling power and milling time). There was the use of x-ray diffraction to show the reduction of ground and treated material. Some samples of the powders were pressed only ground and heat treated in an oven. In order to observe the structures formed in the scanning electron microscope, and correlate the structures formed by reactive process studied. Obtained structures consisting of chromium beads dispersed among a substrate of aluminum oxide, both products of the reduction reaction. |
id |
UEPG_56985bcae12f6cbd4c507b4b13a35b30 |
---|---|
oai_identifier_str |
oai:tede2.uepg.br:prefix/1470 |
network_acronym_str |
UEPG |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UEPG |
repository_id_str |
|
spelling |
Cintho, Osvaldo MitsuyukiCPF:09591892896http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4702973U6Hupalo, Marcio FerreiraCPF:03274154792http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4761019E9Brocchi, Eduardo de AlbuquerqueCPF:33024731768http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783231J6CPF:05158689903http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4291324P8Castro, Mauricio de2017-07-21T20:43:47Z2016-02-182017-07-21T20:43:47Z2015-01-30CASTRO, Mauricio de. ESTUDO COMPARATIVO DA ATIVAÇÃO MECÂNICA POR MOINHOS DE ALTA ENERGIA E CARACTERIZAÇÃO DOS PRODUTOS OBTIDOS DURANTE REAÇÃO DE REDUÇÃO DO ÓXIDO DE CROMO POR ALUMÍNIO. 2015. 122 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2015.http://tede2.uepg.br/jspui/handle/prefix/1470This study aims to compare the supply capacity of power each of the three main types of high-energy mills: The "SPEX", Planetary and "Attritor" mills. The system used was chromium oxide with metallic aluminum, both are powders. The reduction reaction of chromium oxide with aluminum in the milling does not occur instantaneously, but is stimulated with mechanical activation of the reagents. The mechanical activation in milling, together with the subsequent heat treatment is that makes a reaction. The energy comparison was made between the mill in two steps: In the first step the milling power was varied for the three mills to be able to identify the milling resulted in the highest exotermic energy peak in the reaction, whereas in the second stage ranged -if the time for milling time find themselves exhibited higher energy released in the reaction. This comparison between the reaction energy peaks confirmed the SPEX as the mill with greater power supply capacity, ie: The mill with the largest peak energy released, followed by the Planetary mill and finally by Attritor mill. In the energy comparison, we studied the influence of the presence of a process control agent in the reaction energy peaks at different milling powers. The milled samples had their power surges reaction determined by thermal analysis of the post. This energy released in the process varied, tending to exhibit a higher peak energy for each of the evaluated parameters (milling power and milling time). There was the use of x-ray diffraction to show the reduction of ground and treated material. Some samples of the powders were pressed only ground and heat treated in an oven. In order to observe the structures formed in the scanning electron microscope, and correlate the structures formed by reactive process studied. Obtained structures consisting of chromium beads dispersed among a substrate of aluminum oxide, both products of the reduction reaction.Este trabalho tem como objetivo comparar a capacidade de fornecimento de energia de cada um dos três principais tipos de moinhos de alta energia: Os moinhos “SPEX”, Planetário e “Attritor”. O sistema usado foi o óxido de cromo com alumínio metálico, ambos na forma de pós. A reação de redução do óxido de cromo pelo alumínio não ocorre instantaneamente na moagem, mas é estimulada com a ativação mecânica dos reagentes. A ativação mecânica na moagem, aliada ao tratamento térmico posterior é que faz a reação ocorrer. A comparação energética entre os moinhos foi feita em duas etapas: Na primeira etapa variou-se o poder de moagem para os três moinhos a fim de identificar o poder de moagem que proporcionou o maior pico de energia na reação, enquanto que na segunda etapa variou-se o tempo para encontrar-se o tempo de moagem que exibiu maior energia liberada na reação. Esta comparação entre os picos de energia de reação confirmou o SPEX como o moinho com maior capacidade de fornecimento de energia, ou seja: O moinho com o maior pico energia liberada, seguido pelo moinho Planetário e por fim pelo moinho Attritor. Além da comparação energética, estudou-se a influência da presença de um agente controlador de processo nos picos de energia de reação em diferentes poderes de moagem. As amostras moídas tiveram seus picos de energia da reação determinados por análises térmicas dos pós. Essa energia liberada no processo variou, tendendo a exibir um maior pico de energia para cada um dos parâmetros avaliados (poder e tempo de moagem). Fez-se o uso da difração de raios x para evidenciar a redução do material moído e tratado. Algumas amostras dos pós apenas moídos foram prensadas e tratadas termicamente em forno. A fim de se observar as estruturas formadas em microscópio eletrônico de varredura, bem como correlacionar as estruturas formadas ao processo reativo estudado. Obteve-se estruturas constituídas por esferas de cromo dispersas em meio a um substrato de óxido de alumínio, ambos produtos da reação de redução.Made available in DSpace on 2017-07-21T20:43:47Z (GMT). No. of bitstreams: 1 Mauricio Castro.pdf: 5841824 bytes, checksum: 35f8699394396800943abee89ca868ba (MD5) Previous issue date: 2015-01-30Fundação Araucária de Apoio ao Desenvolvimento Científico e Tecnológico do Paranáapplication/pdfporUNIVERSIDADE ESTADUAL DE PONTA GROSSAPrograma de Pós-Graduação em Engenharia e Ciências de MateriaisUEPGBRDesenvolvimento e Caracterização de Materiaismoagem de alta energiaativação mecânicaoxido de cromoreduçãohigh energy ball millingmechanical activationchromium oxidereductionCNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICAESTUDO COMPARATIVO DA ATIVAÇÃO MECÂNICA POR MOINHOS DE ALTA ENERGIA E CARACTERIZAÇÃO DOS PRODUTOS OBTIDOS DURANTE REAÇÃO DE REDUÇÃO DO ÓXIDO DE CROMO POR ALUMÍNIOinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UEPGinstname:Universidade Estadual de Ponta Grossa (UEPG)instacron:UEPGORIGINALMauricio Castro.pdfapplication/pdf5841824http://tede2.uepg.br/jspui/bitstream/prefix/1470/1/Mauricio%20Castro.pdf35f8699394396800943abee89ca868baMD51prefix/14702017-07-21 17:43:47.764oai:tede2.uepg.br:prefix/1470Biblioteca Digital de Teses e Dissertaçõeshttps://tede2.uepg.br/jspui/PUBhttp://tede2.uepg.br/oai/requestbicen@uepg.br||mv_fidelis@yahoo.com.bropendoar:2017-07-21T20:43:47Biblioteca Digital de Teses e Dissertações da UEPG - Universidade Estadual de Ponta Grossa (UEPG)false |
dc.title.por.fl_str_mv |
ESTUDO COMPARATIVO DA ATIVAÇÃO MECÂNICA POR MOINHOS DE ALTA ENERGIA E CARACTERIZAÇÃO DOS PRODUTOS OBTIDOS DURANTE REAÇÃO DE REDUÇÃO DO ÓXIDO DE CROMO POR ALUMÍNIO |
title |
ESTUDO COMPARATIVO DA ATIVAÇÃO MECÂNICA POR MOINHOS DE ALTA ENERGIA E CARACTERIZAÇÃO DOS PRODUTOS OBTIDOS DURANTE REAÇÃO DE REDUÇÃO DO ÓXIDO DE CROMO POR ALUMÍNIO |
spellingShingle |
ESTUDO COMPARATIVO DA ATIVAÇÃO MECÂNICA POR MOINHOS DE ALTA ENERGIA E CARACTERIZAÇÃO DOS PRODUTOS OBTIDOS DURANTE REAÇÃO DE REDUÇÃO DO ÓXIDO DE CROMO POR ALUMÍNIO Castro, Mauricio de moagem de alta energia ativação mecânica oxido de cromo redução high energy ball milling mechanical activation chromium oxide reduction CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
title_short |
ESTUDO COMPARATIVO DA ATIVAÇÃO MECÂNICA POR MOINHOS DE ALTA ENERGIA E CARACTERIZAÇÃO DOS PRODUTOS OBTIDOS DURANTE REAÇÃO DE REDUÇÃO DO ÓXIDO DE CROMO POR ALUMÍNIO |
title_full |
ESTUDO COMPARATIVO DA ATIVAÇÃO MECÂNICA POR MOINHOS DE ALTA ENERGIA E CARACTERIZAÇÃO DOS PRODUTOS OBTIDOS DURANTE REAÇÃO DE REDUÇÃO DO ÓXIDO DE CROMO POR ALUMÍNIO |
title_fullStr |
ESTUDO COMPARATIVO DA ATIVAÇÃO MECÂNICA POR MOINHOS DE ALTA ENERGIA E CARACTERIZAÇÃO DOS PRODUTOS OBTIDOS DURANTE REAÇÃO DE REDUÇÃO DO ÓXIDO DE CROMO POR ALUMÍNIO |
title_full_unstemmed |
ESTUDO COMPARATIVO DA ATIVAÇÃO MECÂNICA POR MOINHOS DE ALTA ENERGIA E CARACTERIZAÇÃO DOS PRODUTOS OBTIDOS DURANTE REAÇÃO DE REDUÇÃO DO ÓXIDO DE CROMO POR ALUMÍNIO |
title_sort |
ESTUDO COMPARATIVO DA ATIVAÇÃO MECÂNICA POR MOINHOS DE ALTA ENERGIA E CARACTERIZAÇÃO DOS PRODUTOS OBTIDOS DURANTE REAÇÃO DE REDUÇÃO DO ÓXIDO DE CROMO POR ALUMÍNIO |
author |
Castro, Mauricio de |
author_facet |
Castro, Mauricio de |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Cintho, Osvaldo Mitsuyuki |
dc.contributor.advisor1ID.fl_str_mv |
CPF:09591892896 |
dc.contributor.advisor1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4702973U6 |
dc.contributor.referee1.fl_str_mv |
Hupalo, Marcio Ferreira |
dc.contributor.referee1ID.fl_str_mv |
CPF:03274154792 |
dc.contributor.referee1Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4761019E9 |
dc.contributor.referee2.fl_str_mv |
Brocchi, Eduardo de Albuquerque |
dc.contributor.referee2ID.fl_str_mv |
CPF:33024731768 |
dc.contributor.referee2Lattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783231J6 |
dc.contributor.authorID.fl_str_mv |
CPF:05158689903 |
dc.contributor.authorLattes.fl_str_mv |
http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4291324P8 |
dc.contributor.author.fl_str_mv |
Castro, Mauricio de |
contributor_str_mv |
Cintho, Osvaldo Mitsuyuki Hupalo, Marcio Ferreira Brocchi, Eduardo de Albuquerque |
dc.subject.por.fl_str_mv |
moagem de alta energia ativação mecânica oxido de cromo redução |
topic |
moagem de alta energia ativação mecânica oxido de cromo redução high energy ball milling mechanical activation chromium oxide reduction CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
dc.subject.eng.fl_str_mv |
high energy ball milling mechanical activation chromium oxide reduction |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
description |
This study aims to compare the supply capacity of power each of the three main types of high-energy mills: The "SPEX", Planetary and "Attritor" mills. The system used was chromium oxide with metallic aluminum, both are powders. The reduction reaction of chromium oxide with aluminum in the milling does not occur instantaneously, but is stimulated with mechanical activation of the reagents. The mechanical activation in milling, together with the subsequent heat treatment is that makes a reaction. The energy comparison was made between the mill in two steps: In the first step the milling power was varied for the three mills to be able to identify the milling resulted in the highest exotermic energy peak in the reaction, whereas in the second stage ranged -if the time for milling time find themselves exhibited higher energy released in the reaction. This comparison between the reaction energy peaks confirmed the SPEX as the mill with greater power supply capacity, ie: The mill with the largest peak energy released, followed by the Planetary mill and finally by Attritor mill. In the energy comparison, we studied the influence of the presence of a process control agent in the reaction energy peaks at different milling powers. The milled samples had their power surges reaction determined by thermal analysis of the post. This energy released in the process varied, tending to exhibit a higher peak energy for each of the evaluated parameters (milling power and milling time). There was the use of x-ray diffraction to show the reduction of ground and treated material. Some samples of the powders were pressed only ground and heat treated in an oven. In order to observe the structures formed in the scanning electron microscope, and correlate the structures formed by reactive process studied. Obtained structures consisting of chromium beads dispersed among a substrate of aluminum oxide, both products of the reduction reaction. |
publishDate |
2015 |
dc.date.issued.fl_str_mv |
2015-01-30 |
dc.date.available.fl_str_mv |
2016-02-18 2017-07-21T20:43:47Z |
dc.date.accessioned.fl_str_mv |
2017-07-21T20:43:47Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
CASTRO, Mauricio de. ESTUDO COMPARATIVO DA ATIVAÇÃO MECÂNICA POR MOINHOS DE ALTA ENERGIA E CARACTERIZAÇÃO DOS PRODUTOS OBTIDOS DURANTE REAÇÃO DE REDUÇÃO DO ÓXIDO DE CROMO POR ALUMÍNIO. 2015. 122 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2015. |
dc.identifier.uri.fl_str_mv |
http://tede2.uepg.br/jspui/handle/prefix/1470 |
identifier_str_mv |
CASTRO, Mauricio de. ESTUDO COMPARATIVO DA ATIVAÇÃO MECÂNICA POR MOINHOS DE ALTA ENERGIA E CARACTERIZAÇÃO DOS PRODUTOS OBTIDOS DURANTE REAÇÃO DE REDUÇÃO DO ÓXIDO DE CROMO POR ALUMÍNIO. 2015. 122 f. Dissertação (Mestrado em Desenvolvimento e Caracterização de Materiais) - UNIVERSIDADE ESTADUAL DE PONTA GROSSA, Ponta Grossa, 2015. |
url |
http://tede2.uepg.br/jspui/handle/prefix/1470 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
UNIVERSIDADE ESTADUAL DE PONTA GROSSA |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia e Ciências de Materiais |
dc.publisher.initials.fl_str_mv |
UEPG |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Desenvolvimento e Caracterização de Materiais |
publisher.none.fl_str_mv |
UNIVERSIDADE ESTADUAL DE PONTA GROSSA |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UEPG instname:Universidade Estadual de Ponta Grossa (UEPG) instacron:UEPG |
instname_str |
Universidade Estadual de Ponta Grossa (UEPG) |
instacron_str |
UEPG |
institution |
UEPG |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UEPG |
collection |
Biblioteca Digital de Teses e Dissertações da UEPG |
bitstream.url.fl_str_mv |
http://tede2.uepg.br/jspui/bitstream/prefix/1470/1/Mauricio%20Castro.pdf |
bitstream.checksum.fl_str_mv |
35f8699394396800943abee89ca868ba |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UEPG - Universidade Estadual de Ponta Grossa (UEPG) |
repository.mail.fl_str_mv |
bicen@uepg.br||mv_fidelis@yahoo.com.br |
_version_ |
1809460454563512320 |