Influência da conicidade no comportamento mecânico de instrumentos de níquel-titânio
Autor(a) principal: | |
---|---|
Data de Publicação: | 2008 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UERJ |
Texto Completo: | http://www.bdtd.uerj.br/handle/1/13995 |
Resumo: | This work has as purpose to evaluate the influence of motor driven nickel-titanium instruments tapering, in the flexibility, resistance to fracture by twisting to the right by rotating flexure, analyzing also by means of scanning electronic microscopy the instruments fracture surface arising by twisting and rotating flexure, as well as the configuration of helices of helical cutting rods of instruments near the fracture point. Sixty instrument made of nickel- -titanium and motor-driven of K3® brand were used (Sybron Dental Specialties-Kerr, Mexico), nominal value of 25mm long, and 0,25mm diameter in Do, in tapering of 0,02 0,04 and 0,06mm/mm. Ten endodontic instruments of each tapering were evaluated by means of the non destructive test of flexure in cantilever and ten endodontic instruments of each tapering were evaluated by means of destructive tests twisting to the right and rotating flexure. After the performance of statistic test,: variance analysis at significance level of 5%, and multiple comparison test from Student-Newman-Keuls to 5%, Taking into consideration the implemented methodology, the applied statistical techniques (e.g. variance analysis at significance level of .05 and multiple comparison test from Student-Newman-Keuls at significance level of .05), and the obtained results, it was demonstrated that the flexibility of the instruments tested decreases as the tapering of the helices of helical cutting rods increases. The maximum twisting angle of the instruments tested by twisting decreases as the tapering of the helices of helical cutting rods increases. The maximum torque up to the fracture of the tested instruments increased as the tapering of the helices of helical cutting rods increased. The number of cycles for the fracture in rotating flexure decreases as the tapering increase and the increase of the resistance in flexure (flexibility decrease) of the tested endodontic instruments increased. The analysis by scanning electronic microscopy revealed that, independently of the tapering and the rotating type (twisting or rotating flexure) applied to the endodontic instrument, the fractured samples presented fractured surface of ductile characteristics. A reversion of the helical cutting rods course was observed on the twisting test near the immobilization point. A reversion of the helical cutting rods course (visible plastic deformation) on the rotating flexure test of the fractured instruments was not observed. |
id |
UERJ_5978042bd5cea8bb9133874268766773 |
---|---|
oai_identifier_str |
oai:www.bdtd.uerj.br:1/13995 |
network_acronym_str |
UERJ |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UERJ |
repository_id_str |
2903 |
spelling |
Fidel, Rivail Antonio Sergiohttp://lattes.cnpq.br/6744149142718837Lopes, Hélio Pereirahttp://lattes.cnpq.br/3424955917613010Fidel, Sandra Riverahttp://lattes.cnpq.br/9713805856848987Elias, Carlos Nelsonhttp://lattes.cnpq.br/3220111929133519Carmo, Antonio Marcio Resende dohttp://lattes.cnpq.br/5338279311506463Barbosa, Carlos Augusto de MeloEgreja, Paulo Aloísiohttp://lattes.cnpq.br/3345546363903004Prado, Marco Aurélio Rodrigues do2021-01-07T14:56:28Z2008-07-022008-02-19PRADO, Marco Aurélio Rodrigues do. Influência da conicidade no comportamento mecânico de instrumentos de níquel-titânio. 2008. 100 f. Tese (Doutorado em Dentística; Endodontia; Odontopediatria; Ortodontia; Periodontia;) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2008.http://www.bdtd.uerj.br/handle/1/13995This work has as purpose to evaluate the influence of motor driven nickel-titanium instruments tapering, in the flexibility, resistance to fracture by twisting to the right by rotating flexure, analyzing also by means of scanning electronic microscopy the instruments fracture surface arising by twisting and rotating flexure, as well as the configuration of helices of helical cutting rods of instruments near the fracture point. Sixty instrument made of nickel- -titanium and motor-driven of K3® brand were used (Sybron Dental Specialties-Kerr, Mexico), nominal value of 25mm long, and 0,25mm diameter in Do, in tapering of 0,02 0,04 and 0,06mm/mm. Ten endodontic instruments of each tapering were evaluated by means of the non destructive test of flexure in cantilever and ten endodontic instruments of each tapering were evaluated by means of destructive tests twisting to the right and rotating flexure. After the performance of statistic test,: variance analysis at significance level of 5%, and multiple comparison test from Student-Newman-Keuls to 5%, Taking into consideration the implemented methodology, the applied statistical techniques (e.g. variance analysis at significance level of .05 and multiple comparison test from Student-Newman-Keuls at significance level of .05), and the obtained results, it was demonstrated that the flexibility of the instruments tested decreases as the tapering of the helices of helical cutting rods increases. The maximum twisting angle of the instruments tested by twisting decreases as the tapering of the helices of helical cutting rods increases. The maximum torque up to the fracture of the tested instruments increased as the tapering of the helices of helical cutting rods increased. The number of cycles for the fracture in rotating flexure decreases as the tapering increase and the increase of the resistance in flexure (flexibility decrease) of the tested endodontic instruments increased. The analysis by scanning electronic microscopy revealed that, independently of the tapering and the rotating type (twisting or rotating flexure) applied to the endodontic instrument, the fractured samples presented fractured surface of ductile characteristics. A reversion of the helical cutting rods course was observed on the twisting test near the immobilization point. A reversion of the helical cutting rods course (visible plastic deformation) on the rotating flexure test of the fractured instruments was not observed.Este trabalho tem como objetivo avaliar a influência da conicidade de instrumentos de níquel-titânio acionados a motor, na flexibilidade; na resistência a fratura por torção à direita e na resistência a fratura por flexão rotativa, analisando ainda por meio de microscopia eletrônica de varredura a superfície de fratura dos instrumentos ocorridas por torção e por flexão rotativa, bem como a configuração das hélices das hastes de corte helicoidais dos instrumentos junto ao ponto de fratura. Foram utilizados sessenta instrumentos fabricados em níquel-titânio acionados a motor da marca K3® (Sybron Dental Specialties-Kerr, México), valores nominais de 25mm de comprimento, e de 0,25mm de diâmetro em Do, nas conicidades de 0,02 0,04 e 0,06mm/mm. Dez instrumentos endodônticos de cada conicidade foram avaliados por meio do ensaio não destrutivo de flexão em cantilever e dez instrumentos endodônticos de cada conicidade foram avaliados por meio dos ensaios destrutivos de torção à direita e de flexão rotativa. Diante das metodologias empregadas, dos resultados obtidos e após a execução dos testes estatísticos: Análise de variância no nível de significância de 5%, e do teste de comparações múltiplas de Student-Newman-Keuls a 5%, podemos concluir que: A flexibilidade dos instrumentos ensaiados diminui com o aumento da conicidade da haste de corte helicoidal. O ângulo máximo de torção dos instrumentos ensaiados por torção diminui com o aumento da conicidade da haste de corte helicoidal. O torque máximo até a fratura dos instrumentos ensaiados por torção aumentou com o aumento da conicidade da haste de corte helicoidal. O número de ciclos para a fratura em flexão rotativa diminui com o aumento da conicidade e com o aumento da resistência em flexão (diminuição da flexibilidade) dos instrumentos endodônticos ensaiados. E quanto à análise por meio do microscópio eletrônico de varredura, independentemente, da conicidade e do tipo de carregamento, (torção ou flexão rotativa) aplicado ao instrumento endodôntico, podemos concluir que as amostras fraturadas apresentaram superfície de fratura com característica dúctil. No ensaio de torção, observou-se a reversão do sentido das hélices das hastes de corte helicoidais junto ao ponto de imobilização dos instrumentos. No ensaio de flexão rotativa não ocorreu reversão do sentido das hélices das hastes de corte helicoidais (deformação plástica visível) dos instrumentos fraturados.Submitted by Boris Flegr (boris@uerj.br) on 2021-01-07T14:56:28Z No. of bitstreams: 1 Marco Aurelio Rodrigues do Prado.pdf: 1500248 bytes, checksum: 2b9d265c953bd0c8f8a9bdef3e4dcd9d (MD5)Made available in DSpace on 2021-01-07T14:56:28Z (GMT). No. of bitstreams: 1 Marco Aurelio Rodrigues do Prado.pdf: 1500248 bytes, checksum: 2b9d265c953bd0c8f8a9bdef3e4dcd9d (MD5) Previous issue date: 2008-02-19Coordenação de Aperfeiçoamento de Pessoal de Nível Superiorapplication/pdfporUniversidade do Estado do Rio de JaneiroPrograma de Pós-Graduação em OdontologiaUERJBRCentro Biomédico::Faculdade de OdontologiaEndodontic instrumentsNickel-titaniumInstruments flexibilityInstruments fractureInstrumentos endodônticosNíquel-titânioFlexibilidade de instrumentosFratura de instrumentosInstrumentos e aparelhos odontológicosLigas de níquel-titânio (Endodontia)Mecânica da fraturaResistência de materiaisElasticidade (Mecânica)CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::ENDODONTIAInfluência da conicidade no comportamento mecânico de instrumentos de níquel-titânioInfluence of the tapering in the mechanical behavior of instruments of nickel-titaniuminfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UERJinstname:Universidade do Estado do Rio de Janeiro (UERJ)instacron:UERJORIGINALMarco Aurelio Rodrigues do Prado.pdfapplication/pdf1500248http://www.bdtd.uerj.br/bitstream/1/13995/1/Marco+Aurelio+Rodrigues+do+Prado.pdf2b9d265c953bd0c8f8a9bdef3e4dcd9dMD511/139952024-02-26 20:13:28.238oai:www.bdtd.uerj.br:1/13995Biblioteca Digital de Teses e Dissertaçõeshttp://www.bdtd.uerj.br/PUBhttps://www.bdtd.uerj.br:8443/oai/requestbdtd.suporte@uerj.bropendoar:29032024-02-26T23:13:28Biblioteca Digital de Teses e Dissertações da UERJ - Universidade do Estado do Rio de Janeiro (UERJ)false |
dc.title.por.fl_str_mv |
Influência da conicidade no comportamento mecânico de instrumentos de níquel-titânio |
dc.title.alternative.eng.fl_str_mv |
Influence of the tapering in the mechanical behavior of instruments of nickel-titanium |
title |
Influência da conicidade no comportamento mecânico de instrumentos de níquel-titânio |
spellingShingle |
Influência da conicidade no comportamento mecânico de instrumentos de níquel-titânio Prado, Marco Aurélio Rodrigues do Endodontic instruments Nickel-titanium Instruments flexibility Instruments fracture Instrumentos endodônticos Níquel-titânio Flexibilidade de instrumentos Fratura de instrumentos Instrumentos e aparelhos odontológicos Ligas de níquel-titânio (Endodontia) Mecânica da fratura Resistência de materiais Elasticidade (Mecânica) CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::ENDODONTIA |
title_short |
Influência da conicidade no comportamento mecânico de instrumentos de níquel-titânio |
title_full |
Influência da conicidade no comportamento mecânico de instrumentos de níquel-titânio |
title_fullStr |
Influência da conicidade no comportamento mecânico de instrumentos de níquel-titânio |
title_full_unstemmed |
Influência da conicidade no comportamento mecânico de instrumentos de níquel-titânio |
title_sort |
Influência da conicidade no comportamento mecânico de instrumentos de níquel-titânio |
author |
Prado, Marco Aurélio Rodrigues do |
author_facet |
Prado, Marco Aurélio Rodrigues do |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Fidel, Rivail Antonio Sergio |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/6744149142718837 |
dc.contributor.advisor-co1.fl_str_mv |
Lopes, Hélio Pereira |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://lattes.cnpq.br/3424955917613010 |
dc.contributor.referee1.fl_str_mv |
Fidel, Sandra Rivera |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/9713805856848987 |
dc.contributor.referee2.fl_str_mv |
Elias, Carlos Nelson |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/3220111929133519 |
dc.contributor.referee3.fl_str_mv |
Carmo, Antonio Marcio Resende do |
dc.contributor.referee3Lattes.fl_str_mv |
http://lattes.cnpq.br/5338279311506463 |
dc.contributor.referee4.fl_str_mv |
Barbosa, Carlos Augusto de Melo |
dc.contributor.referee5.fl_str_mv |
Egreja, Paulo Aloísio |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/3345546363903004 |
dc.contributor.author.fl_str_mv |
Prado, Marco Aurélio Rodrigues do |
contributor_str_mv |
Fidel, Rivail Antonio Sergio Lopes, Hélio Pereira Fidel, Sandra Rivera Elias, Carlos Nelson Carmo, Antonio Marcio Resende do Barbosa, Carlos Augusto de Melo Egreja, Paulo Aloísio |
dc.subject.eng.fl_str_mv |
Endodontic instruments Nickel-titanium Instruments flexibility Instruments fracture |
topic |
Endodontic instruments Nickel-titanium Instruments flexibility Instruments fracture Instrumentos endodônticos Níquel-titânio Flexibilidade de instrumentos Fratura de instrumentos Instrumentos e aparelhos odontológicos Ligas de níquel-titânio (Endodontia) Mecânica da fratura Resistência de materiais Elasticidade (Mecânica) CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::ENDODONTIA |
dc.subject.por.fl_str_mv |
Instrumentos endodônticos Níquel-titânio Flexibilidade de instrumentos Fratura de instrumentos Instrumentos e aparelhos odontológicos Ligas de níquel-titânio (Endodontia) Mecânica da fratura Resistência de materiais Elasticidade (Mecânica) |
dc.subject.cnpq.fl_str_mv |
CNPQ::CIENCIAS DA SAUDE::ODONTOLOGIA::ENDODONTIA |
description |
This work has as purpose to evaluate the influence of motor driven nickel-titanium instruments tapering, in the flexibility, resistance to fracture by twisting to the right by rotating flexure, analyzing also by means of scanning electronic microscopy the instruments fracture surface arising by twisting and rotating flexure, as well as the configuration of helices of helical cutting rods of instruments near the fracture point. Sixty instrument made of nickel- -titanium and motor-driven of K3® brand were used (Sybron Dental Specialties-Kerr, Mexico), nominal value of 25mm long, and 0,25mm diameter in Do, in tapering of 0,02 0,04 and 0,06mm/mm. Ten endodontic instruments of each tapering were evaluated by means of the non destructive test of flexure in cantilever and ten endodontic instruments of each tapering were evaluated by means of destructive tests twisting to the right and rotating flexure. After the performance of statistic test,: variance analysis at significance level of 5%, and multiple comparison test from Student-Newman-Keuls to 5%, Taking into consideration the implemented methodology, the applied statistical techniques (e.g. variance analysis at significance level of .05 and multiple comparison test from Student-Newman-Keuls at significance level of .05), and the obtained results, it was demonstrated that the flexibility of the instruments tested decreases as the tapering of the helices of helical cutting rods increases. The maximum twisting angle of the instruments tested by twisting decreases as the tapering of the helices of helical cutting rods increases. The maximum torque up to the fracture of the tested instruments increased as the tapering of the helices of helical cutting rods increased. The number of cycles for the fracture in rotating flexure decreases as the tapering increase and the increase of the resistance in flexure (flexibility decrease) of the tested endodontic instruments increased. The analysis by scanning electronic microscopy revealed that, independently of the tapering and the rotating type (twisting or rotating flexure) applied to the endodontic instrument, the fractured samples presented fractured surface of ductile characteristics. A reversion of the helical cutting rods course was observed on the twisting test near the immobilization point. A reversion of the helical cutting rods course (visible plastic deformation) on the rotating flexure test of the fractured instruments was not observed. |
publishDate |
2008 |
dc.date.available.fl_str_mv |
2008-07-02 |
dc.date.issued.fl_str_mv |
2008-02-19 |
dc.date.accessioned.fl_str_mv |
2021-01-07T14:56:28Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
PRADO, Marco Aurélio Rodrigues do. Influência da conicidade no comportamento mecânico de instrumentos de níquel-titânio. 2008. 100 f. Tese (Doutorado em Dentística; Endodontia; Odontopediatria; Ortodontia; Periodontia;) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2008. |
dc.identifier.uri.fl_str_mv |
http://www.bdtd.uerj.br/handle/1/13995 |
identifier_str_mv |
PRADO, Marco Aurélio Rodrigues do. Influência da conicidade no comportamento mecânico de instrumentos de níquel-titânio. 2008. 100 f. Tese (Doutorado em Dentística; Endodontia; Odontopediatria; Ortodontia; Periodontia;) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2008. |
url |
http://www.bdtd.uerj.br/handle/1/13995 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade do Estado do Rio de Janeiro |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Odontologia |
dc.publisher.initials.fl_str_mv |
UERJ |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Centro Biomédico::Faculdade de Odontologia |
publisher.none.fl_str_mv |
Universidade do Estado do Rio de Janeiro |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UERJ instname:Universidade do Estado do Rio de Janeiro (UERJ) instacron:UERJ |
instname_str |
Universidade do Estado do Rio de Janeiro (UERJ) |
instacron_str |
UERJ |
institution |
UERJ |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UERJ |
collection |
Biblioteca Digital de Teses e Dissertações da UERJ |
bitstream.url.fl_str_mv |
http://www.bdtd.uerj.br/bitstream/1/13995/1/Marco+Aurelio+Rodrigues+do+Prado.pdf |
bitstream.checksum.fl_str_mv |
2b9d265c953bd0c8f8a9bdef3e4dcd9d |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UERJ - Universidade do Estado do Rio de Janeiro (UERJ) |
repository.mail.fl_str_mv |
bdtd.suporte@uerj.br |
_version_ |
1811728677081186304 |