Determinação das propriedades do revestimento metálico obtido por aspersão térmica e análise de sua influência na eficiência da transferência de calor em tubos de caldeiras de usinas termelétricas

• Autor(a) principal: Campos, Pamella Kesseler de
• Data de Publicação: 2022
• Outros Autores: [e-mail]
• Tipo de documento: Tese
• Idioma: por
• Título da fonte: Biblioteca Digital de Teses e Dissertações da UERJ
• Texto Completo: http://www.bdtd.uerj.br/handle/1/18318
• topic: Mechanical engineering; Metal coating; Thermal spray; Boilers; Heat - Transmission; Power plants; Engenharia mecânica; Revestimento em metal; Aspersão térmica; Caldeiras; Calor - Transmissão; Usinas elétricas; ENGENHARIAS::ENGENHARIA MECANICA::MECANICA DOS SOLIDOS

Mineral coal is a fuel that can be used by thermoelectric plants to generate electricity, however, the solid residues of its combustion, so-called ash, cause erosion and corrosion in the internal components of boilers that operate at high temperatures, causing failures in the system. This study proposes a metallic coating based on Fe-Cr-Si, obtained using the electric arc thermal spray technique as an alternative for protecting the most affected parts of boiler tubes by the ash impact. Optical microscopy (OM), scanning electron microscopy (SEM), semi-quantitative chemical analysis by Energy Dispersive Spectroscopy (EDS), X-ray diffraction (XRD), roughness measurements, pull-off adhesion tests were used. Thermal diffusivity measurements and mathematical modelling were elaborated to evaluate the thermal exchange efficiency impact of the coating in thermoelectric plant boiler tubes. The results showed that the chemical components of the sprayed wire were well incorporated into a coating with a hardness of 730.54 ± 164.28 HV, approximately three times greater than the hardness of boiler pipes and only 11% less than the hardness of ash. XRD identified the presence of crystalline phases in the coating and adhesion tests showed that the failures were cohesive without substrate exposure. The presence of the coating reduced heat exchange of approximately 0.64% / tube length. These results showed that the proposed coating, which has a lower cost compared to others, be a promising solution to avoid unscheduled shutdowns in thermoelectric boilers.