Caracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gases
Autor(a) principal: | |
---|---|
Data de Publicação: | 2012 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UERJ |
Texto Completo: | http://www.bdtd.uerj.br/handle/1/11974 |
Resumo: | Among the polymers considered promising for the selective removal of CO2 from natural gas, those containing ethylene glycol groups (EG) are the most distinguished. In this study cast films were obtained from aqueous dispersions of polyurethane (PU), synthesized in a previous work with poly (propylene glycol) (PPG), block copolymer based on poly(ethylene glycol) (PEG) and PPG, dimethylolpropionic acid (DMPA), isophorone diisocyanate (IPDI) and ethylenediamine (EDA). Segments of PPG, EG-b-PG and DMPA formed the flexible domains in the proportions of: PPG 100% and 0% EG-b-PG, PPG 75% and 25% EG-b-PG, PPG 50% and 50% EG-b-PG and PPG 25% and 75% EG-b-PG, in terms of equivalent-grams. The influence of the amount of PEG segments in permeation properties of CO2, CH4 and N2 was verified by permeability essays. The membranes were obtained as cast films from the dispersions and was characterized by infrared spectrometry (FTIR), termogravimetric analysis (TGA), X ray diffractometry (XRD) and small angle X ray scattering (SAXS). FTIR spectra showed that PEG segments influenced carbonyl band frequency. Loss of mass curves with temperature (TG) showed similar profiles of degradation, whereas DTG curves presented more stages. PEG segments conferred higher thermal stability for the materials. XRD and SAXS analysis showed that PEG promoted ordination to the membranes. In gas permeation tests, it was verified that the increase in copolymer amount increased permeability value for CO2, being attributed to the fact that the segments of poly(ethylene glycol) interacted favorably with this gas. In relation to CH4 and N2, there was a significant decrease in permeability when compared to the values found for CO2, being assigned to a loss of segmental mobility with increasing content of EG. In terms of selectivity, the pair CO2/CH4 had a mean value of 61,7 for the membrane containing the highest amount of EG groups, and the pair CO2/N2 produced a mean value of 121,5 for the same one, being superior than those found in the literature, making a promising material |
id |
UERJ_9c9cf25c11ca2c06dba0cfabe9f2f806 |
---|---|
oai_identifier_str |
oai:www.bdtd.uerj.br:1/11974 |
network_acronym_str |
UERJ |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UERJ |
repository_id_str |
2903 |
spelling |
Reis, Rodrigo Azevedo doshttp://lattes.cnpq.br/7710576432746865Cesar, Deborah Vargashttp://lattes.cnpq.br/1350917983266189Delpech, Marcia Cerqueirahttp://lattes.cnpq.br/7492555701225765Nobrega, Ronaldohttp://lattes.cnpq.br/0199433068609886Vilani, Cecíliahttp://lattes.cnpq.br/3045726671483204http://lattes.cnpq.br/8048530716979438Pereira, Juliana Henriques Costa2021-01-06T19:36:10Z2013-05-162012-02-28PEREIRA, Juliana Henriques Costa. Caracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gases. 2012. 91 f. Dissertação (Mestrado em Processos Químicos e Meio Ambiente) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2012.http://www.bdtd.uerj.br/handle/1/11974Among the polymers considered promising for the selective removal of CO2 from natural gas, those containing ethylene glycol groups (EG) are the most distinguished. In this study cast films were obtained from aqueous dispersions of polyurethane (PU), synthesized in a previous work with poly (propylene glycol) (PPG), block copolymer based on poly(ethylene glycol) (PEG) and PPG, dimethylolpropionic acid (DMPA), isophorone diisocyanate (IPDI) and ethylenediamine (EDA). Segments of PPG, EG-b-PG and DMPA formed the flexible domains in the proportions of: PPG 100% and 0% EG-b-PG, PPG 75% and 25% EG-b-PG, PPG 50% and 50% EG-b-PG and PPG 25% and 75% EG-b-PG, in terms of equivalent-grams. The influence of the amount of PEG segments in permeation properties of CO2, CH4 and N2 was verified by permeability essays. The membranes were obtained as cast films from the dispersions and was characterized by infrared spectrometry (FTIR), termogravimetric analysis (TGA), X ray diffractometry (XRD) and small angle X ray scattering (SAXS). FTIR spectra showed that PEG segments influenced carbonyl band frequency. Loss of mass curves with temperature (TG) showed similar profiles of degradation, whereas DTG curves presented more stages. PEG segments conferred higher thermal stability for the materials. XRD and SAXS analysis showed that PEG promoted ordination to the membranes. In gas permeation tests, it was verified that the increase in copolymer amount increased permeability value for CO2, being attributed to the fact that the segments of poly(ethylene glycol) interacted favorably with this gas. In relation to CH4 and N2, there was a significant decrease in permeability when compared to the values found for CO2, being assigned to a loss of segmental mobility with increasing content of EG. In terms of selectivity, the pair CO2/CH4 had a mean value of 61,7 for the membrane containing the highest amount of EG groups, and the pair CO2/N2 produced a mean value of 121,5 for the same one, being superior than those found in the literature, making a promising materialEntre os polímeros considerados promissores para a remoção seletiva de CO2, destacam-se aqueles que contêm os grupos glicol etilênico (EG). Nesta dissertação, foram obtidos filmes a partir de dispersões aquosas de poliuretano (PU), sintetizadas em trabalho anterior, à base de poli(glicol propilênico) (PPG), copolímero em bloco à base de poli(glicol etilênico) (PEG) e PPG (EG-b-PG), ácido dimetilolpropiônico (DMPA), diisocianato de isoforona (IPDI) e etilenodiamina (EDA). PPG, EG-b-PG e DMPA formaram as regiões flexíveis nas proporções de: PPG 100% e 0% EG-b-PG, PPG 75% e 25% EG-b-PG, PPG 50% e 50% EG-b-PG e PPG 25% e 75% EG-b-PG em termos de equivalentes-gramas. A influência da quantidade dos segmentos de PEG foi avaliada por ensaios de permeação com os gases CO2, CH4 e N2. Os filmes obtidos das dispersões foram caracterizados por espectrometria de infravermelho com transformadas de Fourier (FTIR), análise termogravimétrica (TGA), difração de raios x (DRX) e espalhamento de raios X a baixo ângulo (SAXS). Espectros de FTIR mostraram que os segmentos de EG influenciaram a frequência da banda de carbonila. Curvas de perda de massa (TG) mostraram perfis semelhantes de degradação, enquanto que as curvas derivadas apresentaram diferenças. DRX e SAXS mostraram que os segmentos de PEG promoveram uma maior ordenação na estrutura da membrana. Testes de permeação de gases mostraram que o aumento do teor de PEG aumentou o valor da permeabilidade para o CO2, indicando que os segmentos de PEG interagiram favoravelmente com este gás. Em relação ao CH4 e N2, houve uma diminuição na permeabilidade quando comparados com os valores encontrados para o CO2, sendo atribuído a perda de mobilidade segmental. Em termos de seletividade, para o par CO2/CH4 foi obtido um valor médio de 61,7 para a membrana contendo o maior teor de PEG, e o par CO2/N2 um valor médio de 121,5, sendo superior aos valores encontrados na literatura, tornando o material promissorSubmitted by Boris Flegr (boris@uerj.br) on 2021-01-06T19:36:10Z No. of bitstreams: 1 dissertacao juliana henriques costa pereira formatada.pdf: 1012092 bytes, checksum: 48634a547fa4719baae3b5ec0eb5260e (MD5)Made available in DSpace on 2021-01-06T19:36:10Z (GMT). No. of bitstreams: 1 dissertacao juliana henriques costa pereira formatada.pdf: 1012092 bytes, checksum: 48634a547fa4719baae3b5ec0eb5260e (MD5) Previous issue date: 2012-02-28Coordenação de Aperfeiçoamento de Pessoal de Nível Superiorapplication/pdfporUniversidade do Estado do Rio de JaneiroPrograma de Pós-Graduação em Engenharia QuímicaUERJBRCentro de Tecnologia e Ciências::Instituto de QuímicaGas permeationaqueous dispersionpolyurethanepoly(urethane-urea)spoly(ethylene glycol)Permeação de gasesdispersões aquosaspoliuretanospoli(uretano-uréia)sPoli(glicol etilênico)CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA::PROCESSOS INDUSTRIAIS DE ENGENHARIA QUIMICACaracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gasesCharacterizations of films formed from aqueous dispersions of poly(urethane-urea)s for use as membranes for gas permeationinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UERJinstname:Universidade do Estado do Rio de Janeiro (UERJ)instacron:UERJORIGINALdissertacao juliana henriques costa pereira formatada.pdfapplication/pdf1012092http://www.bdtd.uerj.br/bitstream/1/11974/1/dissertacao+juliana+henriques+costa+pereira+formatada.pdf48634a547fa4719baae3b5ec0eb5260eMD511/119742024-02-27 15:35:59.894oai:www.bdtd.uerj.br:1/11974Biblioteca Digital de Teses e Dissertaçõeshttp://www.bdtd.uerj.br/PUBhttps://www.bdtd.uerj.br:8443/oai/requestbdtd.suporte@uerj.bropendoar:29032024-02-27T18:35:59Biblioteca Digital de Teses e Dissertações da UERJ - Universidade do Estado do Rio de Janeiro (UERJ)false |
dc.title.por.fl_str_mv |
Caracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gases |
dc.title.alternative.eng.fl_str_mv |
Characterizations of films formed from aqueous dispersions of poly(urethane-urea)s for use as membranes for gas permeation |
title |
Caracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gases |
spellingShingle |
Caracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gases Pereira, Juliana Henriques Costa Gas permeation aqueous dispersion polyurethane poly(urethane-urea)s poly(ethylene glycol) Permeação de gases dispersões aquosas poliuretanos poli(uretano-uréia)s Poli(glicol etilênico) CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA::PROCESSOS INDUSTRIAIS DE ENGENHARIA QUIMICA |
title_short |
Caracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gases |
title_full |
Caracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gases |
title_fullStr |
Caracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gases |
title_full_unstemmed |
Caracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gases |
title_sort |
Caracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gases |
author |
Pereira, Juliana Henriques Costa |
author_facet |
Pereira, Juliana Henriques Costa |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Reis, Rodrigo Azevedo dos |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/7710576432746865 |
dc.contributor.referee1.fl_str_mv |
Cesar, Deborah Vargas |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/1350917983266189 |
dc.contributor.referee2.fl_str_mv |
Delpech, Marcia Cerqueira |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/7492555701225765 |
dc.contributor.referee3.fl_str_mv |
Nobrega, Ronaldo |
dc.contributor.referee3Lattes.fl_str_mv |
http://lattes.cnpq.br/0199433068609886 |
dc.contributor.referee4.fl_str_mv |
Vilani, Cecília |
dc.contributor.referee4Lattes.fl_str_mv |
http://lattes.cnpq.br/3045726671483204 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/8048530716979438 |
dc.contributor.author.fl_str_mv |
Pereira, Juliana Henriques Costa |
contributor_str_mv |
Reis, Rodrigo Azevedo dos Cesar, Deborah Vargas Delpech, Marcia Cerqueira Nobrega, Ronaldo Vilani, Cecília |
dc.subject.eng.fl_str_mv |
Gas permeation aqueous dispersion polyurethane poly(urethane-urea)s poly(ethylene glycol) |
topic |
Gas permeation aqueous dispersion polyurethane poly(urethane-urea)s poly(ethylene glycol) Permeação de gases dispersões aquosas poliuretanos poli(uretano-uréia)s Poli(glicol etilênico) CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA::PROCESSOS INDUSTRIAIS DE ENGENHARIA QUIMICA |
dc.subject.por.fl_str_mv |
Permeação de gases dispersões aquosas poliuretanos poli(uretano-uréia)s Poli(glicol etilênico) |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA::PROCESSOS INDUSTRIAIS DE ENGENHARIA QUIMICA |
description |
Among the polymers considered promising for the selective removal of CO2 from natural gas, those containing ethylene glycol groups (EG) are the most distinguished. In this study cast films were obtained from aqueous dispersions of polyurethane (PU), synthesized in a previous work with poly (propylene glycol) (PPG), block copolymer based on poly(ethylene glycol) (PEG) and PPG, dimethylolpropionic acid (DMPA), isophorone diisocyanate (IPDI) and ethylenediamine (EDA). Segments of PPG, EG-b-PG and DMPA formed the flexible domains in the proportions of: PPG 100% and 0% EG-b-PG, PPG 75% and 25% EG-b-PG, PPG 50% and 50% EG-b-PG and PPG 25% and 75% EG-b-PG, in terms of equivalent-grams. The influence of the amount of PEG segments in permeation properties of CO2, CH4 and N2 was verified by permeability essays. The membranes were obtained as cast films from the dispersions and was characterized by infrared spectrometry (FTIR), termogravimetric analysis (TGA), X ray diffractometry (XRD) and small angle X ray scattering (SAXS). FTIR spectra showed that PEG segments influenced carbonyl band frequency. Loss of mass curves with temperature (TG) showed similar profiles of degradation, whereas DTG curves presented more stages. PEG segments conferred higher thermal stability for the materials. XRD and SAXS analysis showed that PEG promoted ordination to the membranes. In gas permeation tests, it was verified that the increase in copolymer amount increased permeability value for CO2, being attributed to the fact that the segments of poly(ethylene glycol) interacted favorably with this gas. In relation to CH4 and N2, there was a significant decrease in permeability when compared to the values found for CO2, being assigned to a loss of segmental mobility with increasing content of EG. In terms of selectivity, the pair CO2/CH4 had a mean value of 61,7 for the membrane containing the highest amount of EG groups, and the pair CO2/N2 produced a mean value of 121,5 for the same one, being superior than those found in the literature, making a promising material |
publishDate |
2012 |
dc.date.issued.fl_str_mv |
2012-02-28 |
dc.date.available.fl_str_mv |
2013-05-16 |
dc.date.accessioned.fl_str_mv |
2021-01-06T19:36:10Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
PEREIRA, Juliana Henriques Costa. Caracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gases. 2012. 91 f. Dissertação (Mestrado em Processos Químicos e Meio Ambiente) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2012. |
dc.identifier.uri.fl_str_mv |
http://www.bdtd.uerj.br/handle/1/11974 |
identifier_str_mv |
PEREIRA, Juliana Henriques Costa. Caracterização de filmes formados por dispersões aquosas de poli(uretano-uréia)s para aplicação em membranas para permeação de gases. 2012. 91 f. Dissertação (Mestrado em Processos Químicos e Meio Ambiente) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2012. |
url |
http://www.bdtd.uerj.br/handle/1/11974 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade do Estado do Rio de Janeiro |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Química |
dc.publisher.initials.fl_str_mv |
UERJ |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Centro de Tecnologia e Ciências::Instituto de Química |
publisher.none.fl_str_mv |
Universidade do Estado do Rio de Janeiro |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UERJ instname:Universidade do Estado do Rio de Janeiro (UERJ) instacron:UERJ |
instname_str |
Universidade do Estado do Rio de Janeiro (UERJ) |
instacron_str |
UERJ |
institution |
UERJ |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UERJ |
collection |
Biblioteca Digital de Teses e Dissertações da UERJ |
bitstream.url.fl_str_mv |
http://www.bdtd.uerj.br/bitstream/1/11974/1/dissertacao+juliana+henriques+costa+pereira+formatada.pdf |
bitstream.checksum.fl_str_mv |
48634a547fa4719baae3b5ec0eb5260e |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UERJ - Universidade do Estado do Rio de Janeiro (UERJ) |
repository.mail.fl_str_mv |
bdtd.suporte@uerj.br |
_version_ |
1792352310936993792 |