Comportamento estrutural de cantoneiras de aço inoxidável submetidas à compressão axial
Autor(a) principal: | |
---|---|
Data de Publicação: | 2017 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UERJ |
Texto Completo: | http://www.bdtd.uerj.br/handle/1/11624 |
Resumo: | The stainless steel has been used in various types of buildings due to its characteristics like high corrosion resistance, durability, fire resistance, ease of maintenance, appearance and aesthetics. The current design of stainless steel standards is still based on carbon steel structures analogies. However, the stainless steel features four nonlinear stress versus strain curves without a defined yield plateau and a substantial hardening region (tension and compression, parallel and perpendicular to the rolling direction), modifying the overall structural behaviour. One aspect that has not yet been completely understood concerns the behaviour of stainless steel columns made of angles subjected to compression. Thus, the present work aimed to study the behaviour of this type of columns. Thirteen tests were conducted on L64x64x6.35 austenitic stainless steel angles section with lengths varying from 250 mm to 1500 mm. These were followed by numerical analyses calibrated against the performed experiments. Finally, these results were compared with design methods recommended in the Eurocode 3 Part 1-4 and with the continuous strength method that still is not included in the Eurocode 3 Part 1-4. The collapse modes were local buckling of angle leg columns for lengths less than or equal to 750 mm and a global flexural buckling mode in the column minor axis by bending to the other, where the flexural torsional buckling mode was not observed in the tests. The Eurocode 3 Part 1-4 recommendations led to conservative designs for normalised slenderness values less than 0.65 and to undersigned structures for values above this slenderness limit, against the security. The continuous strength method led to underdesigned elements for all investigated rolled columns. |
id |
UERJ_a5fe9ebb6a22eeb3fb993ee780bdfa7e |
---|---|
oai_identifier_str |
oai:www.bdtd.uerj.br:1/11624 |
network_acronym_str |
UERJ |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UERJ |
repository_id_str |
2903 |
spelling |
Vellasco, Pedro Colmar Gonçalves da Silvahttp://lattes.cnpq.br/2438486171976888Lima, Luciano Rodrigues Ornelas dehttp://lattes.cnpq.br/2151919861612154Silva, André Tenchini dahttp://lattes.cnpq.br/7036280752466413Rodrigues, Monique Cordeirohttp://lattes.cnpq.br/9392939752668118Batista, Eduardo de Mirandahttp://lattes.cnpq.br/9045444814367137http://lattes.cnpq.br/1035874271399025Menezes, Arthur Araujo de2021-01-06T19:02:59Z2018-02-192017-06-28MENEZES, Arthur Araujo de. Comportamento estrutural de cantoneiras de aço inoxidável submetidas à compressão axial. 2017. 138 f. Dissertação (Mestrado em Estruturas; Geotecnia; Construção Civil) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2017.http://www.bdtd.uerj.br/handle/1/11624The stainless steel has been used in various types of buildings due to its characteristics like high corrosion resistance, durability, fire resistance, ease of maintenance, appearance and aesthetics. The current design of stainless steel standards is still based on carbon steel structures analogies. However, the stainless steel features four nonlinear stress versus strain curves without a defined yield plateau and a substantial hardening region (tension and compression, parallel and perpendicular to the rolling direction), modifying the overall structural behaviour. One aspect that has not yet been completely understood concerns the behaviour of stainless steel columns made of angles subjected to compression. Thus, the present work aimed to study the behaviour of this type of columns. Thirteen tests were conducted on L64x64x6.35 austenitic stainless steel angles section with lengths varying from 250 mm to 1500 mm. These were followed by numerical analyses calibrated against the performed experiments. Finally, these results were compared with design methods recommended in the Eurocode 3 Part 1-4 and with the continuous strength method that still is not included in the Eurocode 3 Part 1-4. The collapse modes were local buckling of angle leg columns for lengths less than or equal to 750 mm and a global flexural buckling mode in the column minor axis by bending to the other, where the flexural torsional buckling mode was not observed in the tests. The Eurocode 3 Part 1-4 recommendations led to conservative designs for normalised slenderness values less than 0.65 and to undersigned structures for values above this slenderness limit, against the security. The continuous strength method led to underdesigned elements for all investigated rolled columns.O aço inoxidável vem sendo utilizado em vários tipos de construções devido as suas características de alta resistência à corrosão, durabilidade, resistência ao fogo, facilidade de manutenção, aparência e estética. As atuais normas de projeto de aço inoxidável são em grande parte baseadas em analogias assumidas com o comportamento de estruturas de aço carbono. Entretanto, o aço inoxidável apresenta quatro curvas tensão versus deformação não lineares sem patamar de escoamento e região de encruamento claramente definidos (tração e compressão, paralela e perpendicular à direção da laminação), modificando assim, o comportamento estrutural global. Um dos aspectos que ainda não foi completamente entendido diz respeito ao comportamento de colunas de aço inoxidável compostas por cantoneiras sujeitas a compressão. Desta forma, o presente trabalho objetivou estudar o comportamento deste tipo de colunas. Treze ensaios foram realizados em cantoneiras em aço inoxidável austenítico de seção L64x64x6,35 e comprimento variável de 250mm a 1500mm. Em seguida, foram desenvolvidas análises numéricas através do método dos elementos finitos calibradas com os resultados dos ensaios experimentais. Por fim, estes resultados foram comparados com métodos de cálculo preconizados no Eurocode 3 Parte 1-4 e o Método da Resistência Contínua, método que ainda não foi incluído na norma europeia até o presente momento. O modo de ruína apresentado pelas colunas foi de flambagem local das abas das cantoneiras para comprimentos menores ou iguais a 750mm e flambagem por flexão para as demais, não apresentando assim a flambagem flexo-torsional. Verificou-se que para valores de esbeltez normalizada menores que 0,65, o critério de cálculo preconizado pelo Eurocode 3 Parte 1-4 é conservador e que para valores acima deste, contra a segurança. E que o Método da Resistência Contínua mostrou ser contra a segurança para o caso de colunas de perfis laminados de aço inoxidável.Submitted by Boris Flegr (boris@uerj.br) on 2021-01-06T19:02:59Z No. of bitstreams: 1 Arthur Araujo de Menezes.pdf: 8197607 bytes, checksum: 5130f7228ca66d90e13f509b66d4d54e (MD5)Made available in DSpace on 2021-01-06T19:02:59Z (GMT). No. of bitstreams: 1 Arthur Araujo de Menezes.pdf: 8197607 bytes, checksum: 5130f7228ca66d90e13f509b66d4d54e (MD5) Previous issue date: 2017-06-28application/pdfporUniversidade do Estado do Rio de JaneiroPrograma de Pós-Graduação em Engenharia CivilUERJBRCentro de Tecnologia e Ciências::Faculdade de EngenhariaCivil EngineeringResistance of materialsStructuresStainless steelAngles under compressionBuckling curvesEurocodeContinuous strength methodEngenharia CivilResistência de materiaisEstruturasAço inoxidávelCantoneiras em compressãoCurvas de flambagemEurocodeMétodo da Resistência ContínuaCNPQ::ENGENHARIAS::ENGENHARIA CIVILComportamento estrutural de cantoneiras de aço inoxidável submetidas à compressão axialStructural behaviour of Stainless steel angles subjected to axial compressioninfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UERJinstname:Universidade do Estado do Rio de Janeiro (UERJ)instacron:UERJORIGINALArthur Araujo de Menezes.pdfapplication/pdf8197607http://www.bdtd.uerj.br/bitstream/1/11624/1/Arthur+Araujo+de+Menezes.pdf5130f7228ca66d90e13f509b66d4d54eMD511/116242024-02-27 14:52:32.623oai:www.bdtd.uerj.br:1/11624Biblioteca Digital de Teses e Dissertaçõeshttp://www.bdtd.uerj.br/PUBhttps://www.bdtd.uerj.br:8443/oai/requestbdtd.suporte@uerj.bropendoar:29032024-02-27T17:52:32Biblioteca Digital de Teses e Dissertações da UERJ - Universidade do Estado do Rio de Janeiro (UERJ)false |
dc.title.por.fl_str_mv |
Comportamento estrutural de cantoneiras de aço inoxidável submetidas à compressão axial |
dc.title.alternative.eng.fl_str_mv |
Structural behaviour of Stainless steel angles subjected to axial compression |
title |
Comportamento estrutural de cantoneiras de aço inoxidável submetidas à compressão axial |
spellingShingle |
Comportamento estrutural de cantoneiras de aço inoxidável submetidas à compressão axial Menezes, Arthur Araujo de Civil Engineering Resistance of materials Structures Stainless steel Angles under compression Buckling curves Eurocode Continuous strength method Engenharia Civil Resistência de materiais Estruturas Aço inoxidável Cantoneiras em compressão Curvas de flambagem Eurocode Método da Resistência Contínua CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
title_short |
Comportamento estrutural de cantoneiras de aço inoxidável submetidas à compressão axial |
title_full |
Comportamento estrutural de cantoneiras de aço inoxidável submetidas à compressão axial |
title_fullStr |
Comportamento estrutural de cantoneiras de aço inoxidável submetidas à compressão axial |
title_full_unstemmed |
Comportamento estrutural de cantoneiras de aço inoxidável submetidas à compressão axial |
title_sort |
Comportamento estrutural de cantoneiras de aço inoxidável submetidas à compressão axial |
author |
Menezes, Arthur Araujo de |
author_facet |
Menezes, Arthur Araujo de |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Vellasco, Pedro Colmar Gonçalves da Silva |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/2438486171976888 |
dc.contributor.advisor-co1.fl_str_mv |
Lima, Luciano Rodrigues Ornelas de |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://lattes.cnpq.br/2151919861612154 |
dc.contributor.advisor-co2.fl_str_mv |
Silva, André Tenchini da |
dc.contributor.advisor-co2Lattes.fl_str_mv |
http://lattes.cnpq.br/7036280752466413 |
dc.contributor.referee1.fl_str_mv |
Rodrigues, Monique Cordeiro |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/9392939752668118 |
dc.contributor.referee2.fl_str_mv |
Batista, Eduardo de Miranda |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/9045444814367137 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/1035874271399025 |
dc.contributor.author.fl_str_mv |
Menezes, Arthur Araujo de |
contributor_str_mv |
Vellasco, Pedro Colmar Gonçalves da Silva Lima, Luciano Rodrigues Ornelas de Silva, André Tenchini da Rodrigues, Monique Cordeiro Batista, Eduardo de Miranda |
dc.subject.eng.fl_str_mv |
Civil Engineering Resistance of materials Structures Stainless steel Angles under compression Buckling curves Eurocode Continuous strength method |
topic |
Civil Engineering Resistance of materials Structures Stainless steel Angles under compression Buckling curves Eurocode Continuous strength method Engenharia Civil Resistência de materiais Estruturas Aço inoxidável Cantoneiras em compressão Curvas de flambagem Eurocode Método da Resistência Contínua CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
dc.subject.por.fl_str_mv |
Engenharia Civil Resistência de materiais Estruturas Aço inoxidável Cantoneiras em compressão Curvas de flambagem Eurocode Método da Resistência Contínua |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA CIVIL |
description |
The stainless steel has been used in various types of buildings due to its characteristics like high corrosion resistance, durability, fire resistance, ease of maintenance, appearance and aesthetics. The current design of stainless steel standards is still based on carbon steel structures analogies. However, the stainless steel features four nonlinear stress versus strain curves without a defined yield plateau and a substantial hardening region (tension and compression, parallel and perpendicular to the rolling direction), modifying the overall structural behaviour. One aspect that has not yet been completely understood concerns the behaviour of stainless steel columns made of angles subjected to compression. Thus, the present work aimed to study the behaviour of this type of columns. Thirteen tests were conducted on L64x64x6.35 austenitic stainless steel angles section with lengths varying from 250 mm to 1500 mm. These were followed by numerical analyses calibrated against the performed experiments. Finally, these results were compared with design methods recommended in the Eurocode 3 Part 1-4 and with the continuous strength method that still is not included in the Eurocode 3 Part 1-4. The collapse modes were local buckling of angle leg columns for lengths less than or equal to 750 mm and a global flexural buckling mode in the column minor axis by bending to the other, where the flexural torsional buckling mode was not observed in the tests. The Eurocode 3 Part 1-4 recommendations led to conservative designs for normalised slenderness values less than 0.65 and to undersigned structures for values above this slenderness limit, against the security. The continuous strength method led to underdesigned elements for all investigated rolled columns. |
publishDate |
2017 |
dc.date.issued.fl_str_mv |
2017-06-28 |
dc.date.available.fl_str_mv |
2018-02-19 |
dc.date.accessioned.fl_str_mv |
2021-01-06T19:02:59Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
MENEZES, Arthur Araujo de. Comportamento estrutural de cantoneiras de aço inoxidável submetidas à compressão axial. 2017. 138 f. Dissertação (Mestrado em Estruturas; Geotecnia; Construção Civil) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2017. |
dc.identifier.uri.fl_str_mv |
http://www.bdtd.uerj.br/handle/1/11624 |
identifier_str_mv |
MENEZES, Arthur Araujo de. Comportamento estrutural de cantoneiras de aço inoxidável submetidas à compressão axial. 2017. 138 f. Dissertação (Mestrado em Estruturas; Geotecnia; Construção Civil) - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, 2017. |
url |
http://www.bdtd.uerj.br/handle/1/11624 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade do Estado do Rio de Janeiro |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Civil |
dc.publisher.initials.fl_str_mv |
UERJ |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Centro de Tecnologia e Ciências::Faculdade de Engenharia |
publisher.none.fl_str_mv |
Universidade do Estado do Rio de Janeiro |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UERJ instname:Universidade do Estado do Rio de Janeiro (UERJ) instacron:UERJ |
instname_str |
Universidade do Estado do Rio de Janeiro (UERJ) |
instacron_str |
UERJ |
institution |
UERJ |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UERJ |
collection |
Biblioteca Digital de Teses e Dissertações da UERJ |
bitstream.url.fl_str_mv |
http://www.bdtd.uerj.br/bitstream/1/11624/1/Arthur+Araujo+de+Menezes.pdf |
bitstream.checksum.fl_str_mv |
5130f7228ca66d90e13f509b66d4d54e |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UERJ - Universidade do Estado do Rio de Janeiro (UERJ) |
repository.mail.fl_str_mv |
bdtd.suporte@uerj.br |
_version_ |
1811728660061749248 |