Análise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivos
Autor(a) principal: | |
---|---|
Data de Publicação: | 2015 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UERJ |
Texto Completo: | http://www.bdtd.uerj.br/handle/1/8019 |
Resumo: | Sliding systems with interface formed by low alloy steels and various polymers are widely used in the automotive industry in torque transmission systems subjected to axial loading. Usually these systems are coupled to steering systems and interact almost directly with the final user of the vehicle. To know the most severe wear conditions which these systems are submitted and attempt to overcome them, the tribological analysis was proposed on tribometer of the pin-on-disk type, on an interface formed by SAE 1020 steel with polyamide 11 in distilled water, 5 wt% aqueous solution of sodium chloride and 184,21 g/l natural sand aqueous solution in accordance with the automotive technical standards VW PV1210: 2010-02 and VW PV2982: 2013-07. The tests were performed at frequencies of 3.0 Hz and 1.5 Hz with a fixed amount of rotation of 10,000 cycles. The corrosion potential on open circuit was monitored throughout the test and the wear rate was calculated. It was highlighted higher friction coefficients, higher wear rates and higher corrosion potential amplitudes in samples assayed in sand solution; with milder values for the samples tested in distilled water and intermediate values for samples tested with sodium chloride solution. |
id |
UERJ_fa0ffbc96df97dbc2345f5dd4b7cc563 |
---|---|
oai_identifier_str |
oai:www.bdtd.uerj.br:1/8019 |
network_acronym_str |
UERJ |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UERJ |
repository_id_str |
2903 |
spelling |
Bastos, Ivan Napoleãohttp://lattes.cnpq.br/6725653281197187Moreira, Ana Cristina Fonteshttp://lattes.cnpq.br/3653572061551441Aliaga, Luis César Rodríguezhttp://lattes.cnpq.br/7148278938710201Fonseca, Maria da Penha Cindrahttp://lattes.cnpq.br/3704231514428206http://lattes.cnpq.br/6952287901292567Springer, Victor Guilherme Amaral2021-01-05T18:30:44Z2016-02-292015-10-05SPRINGER, Victor Guilherme Amaral. Análise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivos. 2015. 91 f. Dissertação (Mestrado em Materiais não-metálicos; Física e mecânica dos materiais) - Universidade do Estado do Rio de Janeiro, Nova Friburgo, 2015.http://www.bdtd.uerj.br/handle/1/8019Sliding systems with interface formed by low alloy steels and various polymers are widely used in the automotive industry in torque transmission systems subjected to axial loading. Usually these systems are coupled to steering systems and interact almost directly with the final user of the vehicle. To know the most severe wear conditions which these systems are submitted and attempt to overcome them, the tribological analysis was proposed on tribometer of the pin-on-disk type, on an interface formed by SAE 1020 steel with polyamide 11 in distilled water, 5 wt% aqueous solution of sodium chloride and 184,21 g/l natural sand aqueous solution in accordance with the automotive technical standards VW PV1210: 2010-02 and VW PV2982: 2013-07. The tests were performed at frequencies of 3.0 Hz and 1.5 Hz with a fixed amount of rotation of 10,000 cycles. The corrosion potential on open circuit was monitored throughout the test and the wear rate was calculated. It was highlighted higher friction coefficients, higher wear rates and higher corrosion potential amplitudes in samples assayed in sand solution; with milder values for the samples tested in distilled water and intermediate values for samples tested with sodium chloride solution.Sistemas deslizantes com interface formada com aços baixa liga e polímeros variados são vastamente utilizados na indústria automotiva em sistemas de transmissão de torque submetidas à carregamento axial. Geralmente esses sistemas são acoplados aos sistemas de direção e interagem quase diretamente com o usuário final do veículo. Para conhecer as condições de desgaste mais severas as quais esses sistemas são submetidos e tentar minimiza-las, foi proposta a análise tribológica, em tribômetro do tipo pino-no-disco, da interface aço SAE 1020 com poliamida 11 em água destilada, solução aquosa com 5% em massa de cloreto de sódio e solução aquosa com 184,21 g/l. de areia natural, de acordo com as normas técnicas automotivas VW PV1210:2010-02 e VW PV2982:2013-07. Os ensaios foram realizados em frequências de 3,0 Hz e 1,5 Hz com quantidade fixada em 10.000 ciclos de rotação. O potencial de corrosão em circuito aberto foi monitorado ao longo dos ensaios e a taxa de desgaste foi calculada. Foram evidenciados maiores coeficientes de atrito, maiores taxas de desgaste e maiores amplitudes de potencial de corrosão nas amostras ensaiadas em solução de areia; com valores mais brandos para as amostras ensaiadas em água destilada e valores intermediários para as amostras ensaiadas em solução de cloreto de sódio.Submitted by Boris Flegr (boris@uerj.br) on 2021-01-05T18:30:44Z No. of bitstreams: 1 Dissertacao_VictorGuilhermeAmaralSpringer.pdf: 3130650 bytes, checksum: 6e389c129eaefc67ef29944d570fae10 (MD5)Made available in DSpace on 2021-01-05T18:30:44Z (GMT). No. of bitstreams: 1 Dissertacao_VictorGuilhermeAmaralSpringer.pdf: 3130650 bytes, checksum: 6e389c129eaefc67ef29944d570fae10 (MD5) Previous issue date: 2015-10-05application/pdfporUniversidade do Estado do Rio de JaneiroPrograma de Pós-Graduação em Ciência e Tecnologia de MateriaisUERJBRCentro de Tecnologia e Ciências::Instituto PolitécnicoTribologyWearTribocorrosionWear MechanismsPolyamide 11Carbon Steel SAE 1020Aço CorrosãoCorrosão e anticorrosivosTribologiaDesgaste mecânicoTribocorrosãoMecanismos de desgastePoliamida 11Aço carbono SAE 1020CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA::METALURGIA FISICA::CORROSAOAnálise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivosTribological analysis in carbon steel SAE 1020 and polyamide11 interface in automotive sliding systemsinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UERJinstname:Universidade do Estado do Rio de Janeiro (UERJ)instacron:UERJORIGINALDissertacao_VictorGuilhermeAmaralSpringer.pdfapplication/pdf3130650http://www.bdtd.uerj.br/bitstream/1/8019/1/Dissertacao_VictorGuilhermeAmaralSpringer.pdf6e389c129eaefc67ef29944d570fae10MD511/80192024-02-27 14:29:36.949oai:www.bdtd.uerj.br:1/8019Biblioteca Digital de Teses e Dissertaçõeshttp://www.bdtd.uerj.br/PUBhttps://www.bdtd.uerj.br:8443/oai/requestbdtd.suporte@uerj.bropendoar:29032024-02-27T17:29:36Biblioteca Digital de Teses e Dissertações da UERJ - Universidade do Estado do Rio de Janeiro (UERJ)false |
dc.title.por.fl_str_mv |
Análise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivos |
dc.title.alternative.eng.fl_str_mv |
Tribological analysis in carbon steel SAE 1020 and polyamide11 interface in automotive sliding systems |
title |
Análise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivos |
spellingShingle |
Análise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivos Springer, Victor Guilherme Amaral Tribology Wear Tribocorrosion Wear Mechanisms Polyamide 11 Carbon Steel SAE 1020 Aço Corrosão Corrosão e anticorrosivos Tribologia Desgaste mecânico Tribocorrosão Mecanismos de desgaste Poliamida 11 Aço carbono SAE 1020 CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA::METALURGIA FISICA::CORROSAO |
title_short |
Análise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivos |
title_full |
Análise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivos |
title_fullStr |
Análise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivos |
title_full_unstemmed |
Análise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivos |
title_sort |
Análise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivos |
author |
Springer, Victor Guilherme Amaral |
author_facet |
Springer, Victor Guilherme Amaral |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Bastos, Ivan Napoleão |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/6725653281197187 |
dc.contributor.advisor-co1.fl_str_mv |
Moreira, Ana Cristina Fontes |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://lattes.cnpq.br/3653572061551441 |
dc.contributor.referee1.fl_str_mv |
Aliaga, Luis César Rodríguez |
dc.contributor.referee1Lattes.fl_str_mv |
http://lattes.cnpq.br/7148278938710201 |
dc.contributor.referee2.fl_str_mv |
Fonseca, Maria da Penha Cindra |
dc.contributor.referee2Lattes.fl_str_mv |
http://lattes.cnpq.br/3704231514428206 |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/6952287901292567 |
dc.contributor.author.fl_str_mv |
Springer, Victor Guilherme Amaral |
contributor_str_mv |
Bastos, Ivan Napoleão Moreira, Ana Cristina Fontes Aliaga, Luis César Rodríguez Fonseca, Maria da Penha Cindra |
dc.subject.eng.fl_str_mv |
Tribology Wear Tribocorrosion Wear Mechanisms Polyamide 11 Carbon Steel SAE 1020 |
topic |
Tribology Wear Tribocorrosion Wear Mechanisms Polyamide 11 Carbon Steel SAE 1020 Aço Corrosão Corrosão e anticorrosivos Tribologia Desgaste mecânico Tribocorrosão Mecanismos de desgaste Poliamida 11 Aço carbono SAE 1020 CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA::METALURGIA FISICA::CORROSAO |
dc.subject.por.fl_str_mv |
Aço Corrosão Corrosão e anticorrosivos Tribologia Desgaste mecânico Tribocorrosão Mecanismos de desgaste Poliamida 11 Aço carbono SAE 1020 |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA::METALURGIA FISICA::CORROSAO |
description |
Sliding systems with interface formed by low alloy steels and various polymers are widely used in the automotive industry in torque transmission systems subjected to axial loading. Usually these systems are coupled to steering systems and interact almost directly with the final user of the vehicle. To know the most severe wear conditions which these systems are submitted and attempt to overcome them, the tribological analysis was proposed on tribometer of the pin-on-disk type, on an interface formed by SAE 1020 steel with polyamide 11 in distilled water, 5 wt% aqueous solution of sodium chloride and 184,21 g/l natural sand aqueous solution in accordance with the automotive technical standards VW PV1210: 2010-02 and VW PV2982: 2013-07. The tests were performed at frequencies of 3.0 Hz and 1.5 Hz with a fixed amount of rotation of 10,000 cycles. The corrosion potential on open circuit was monitored throughout the test and the wear rate was calculated. It was highlighted higher friction coefficients, higher wear rates and higher corrosion potential amplitudes in samples assayed in sand solution; with milder values for the samples tested in distilled water and intermediate values for samples tested with sodium chloride solution. |
publishDate |
2015 |
dc.date.issued.fl_str_mv |
2015-10-05 |
dc.date.available.fl_str_mv |
2016-02-29 |
dc.date.accessioned.fl_str_mv |
2021-01-05T18:30:44Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
SPRINGER, Victor Guilherme Amaral. Análise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivos. 2015. 91 f. Dissertação (Mestrado em Materiais não-metálicos; Física e mecânica dos materiais) - Universidade do Estado do Rio de Janeiro, Nova Friburgo, 2015. |
dc.identifier.uri.fl_str_mv |
http://www.bdtd.uerj.br/handle/1/8019 |
identifier_str_mv |
SPRINGER, Victor Guilherme Amaral. Análise tribológica na interface aço carbono SAE 1020 e poliamida 11 em sistemas de deslizamento automotivos. 2015. 91 f. Dissertação (Mestrado em Materiais não-metálicos; Física e mecânica dos materiais) - Universidade do Estado do Rio de Janeiro, Nova Friburgo, 2015. |
url |
http://www.bdtd.uerj.br/handle/1/8019 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade do Estado do Rio de Janeiro |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Ciência e Tecnologia de Materiais |
dc.publisher.initials.fl_str_mv |
UERJ |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Centro de Tecnologia e Ciências::Instituto Politécnico |
publisher.none.fl_str_mv |
Universidade do Estado do Rio de Janeiro |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UERJ instname:Universidade do Estado do Rio de Janeiro (UERJ) instacron:UERJ |
instname_str |
Universidade do Estado do Rio de Janeiro (UERJ) |
instacron_str |
UERJ |
institution |
UERJ |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UERJ |
collection |
Biblioteca Digital de Teses e Dissertações da UERJ |
bitstream.url.fl_str_mv |
http://www.bdtd.uerj.br/bitstream/1/8019/1/Dissertacao_VictorGuilhermeAmaralSpringer.pdf |
bitstream.checksum.fl_str_mv |
6e389c129eaefc67ef29944d570fae10 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UERJ - Universidade do Estado do Rio de Janeiro (UERJ) |
repository.mail.fl_str_mv |
bdtd.suporte@uerj.br |
_version_ |
1792352281715277824 |