obtenção e testes de protótipo para uso em termistores

• Autor(a) principal: Santos, Matheus Oliveira dos
• Data de Publicação: 2023
• Tipo de documento: Trabalho de conclusão de curso
• Idioma: por
• Título da fonte: Repositório Institucional da UFAM
• Texto Completo: http://riu.ufam.edu.br/handle/prefix/7076
• topic: Termistores; Titanato de sódio; Sensor; ENGENHARIAS: ENGENHARIA DE MATERIAIS E METALURGICA; Engenharia de protótipos; Projetos de engenharia

This work aims to make a piezoelectric ceramic material (Sodium titanate) that will have the effect of a sensor that will help the response of the material applied to an electric thermistor. Its manufacture and application will be simulated by a prototyping program and in laboratory practice, with the aid of an arduino type uno R3. The ceramic powder was obtained. The synthesis of Sodium Titanate Na2Ti3O7 via sonochemical route was carried out at the Laboratory of Technological Materials Processing (LPMAT), at the Federal University of Amazonas (UFAM). The synthesis generated hexatitanate (NaTi6O13), where C12H28 precipitates in water, isopropyl alcohol allows to increase the volume of the solution. Characterization tests such as DRX, FTIR and SEM were performed. After the development and characterization of the ceramic material, it was applied with the aid of an Arduino. The DRX results required the formation of different phases, the EIC showed the structural and electrical behavior of each wafer, being confirmed in the graphic analysis, presenting its characteristic modes in the expected parameters. The application took place with the help of the Arduino, where the sensor had the ability to emit an electrical voltage in response. In view of the results, as an example, they demonstrated good results due to the electrical property of the synthesized titanate, and a sample of pH 10 presented a lower resistive condition.