INFLUENCE OF DRYING TEMPERATURE AND PULP LAYER THICKNESS ON THE PHYSICAL AND PHYSICOCHEMICAL QUALITY OF PEQUI POWDER

• Autor(a) principal: Sousa, Elisabete Piancó de
• Data de Publicação: 2021
• Outros Autores: Lemos, Danielle Martins, Figueirêdo, Rossana Maria Feitosa de, Gomes , Josivanda Palmeira, Queiroz , Alexandre José Melo
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Revista Caatinga
• Texto Completo: https://periodicos.ufersa.edu.br/caatinga/article/view/9646
• topic: Caryocar coriaceum Wittm. Propriedades físicas. Isotermas de adsorção.; Caryocar coriaceum Wittm. Physical properties. Adsorption isotherms.

The objective of this work was to characterize the physical and physicochemical parameters of pequi powders obtained by means of convective drying at different temperatures (50, 60, 70 and 80 °C) and pulp layer thicknesses (0.5, 1.0 and 1.5 cm). Initially, the physicochemical characterization of fresh pulp was carried out, followed by convective drying under the conditions mentioned, until the equilibrium moisture content and subsequent disintegration to obtain the powders. Subsequently, the physical and physicochemical properties of the obtained powders were analyzed and the best powder was selected based on reduced moisture content and water activity and lower peroxide index. Pequi pulp showed a high fat content and a yellowish color; with the increase in drying temperature, there were reductions in the moisture content, water activity and protein content of the powders. As for the color parameters, the powder showed a darkening with the increase in drying time; the water adsorption isotherms of the selected pequi powder were classified as Type II, and the GAB model showed the best fits. The pequi powders showed good solubility and low cohesiveness. The powder that showed good flowability was produced at a drying temperature of 60 ºC and with pequi pulp layer thickness of 0.5 cm.