Glicólise de PET pós-consumo catalisada por líquidos iônicos
Autor(a) principal: | |
---|---|
Data de Publicação: | 2018 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) |
Texto Completo: | http://repositorio.ufes.br/handle/10/7324 |
Resumo: | In the present work, the post-consumption polyethylene terephthalate (PET) depolymerization process was carried out using the glycolysis method with ethylene glycol catalyzed by dialkylimidazole ionic liquids synthesized from 1-butyl-3-methylimidazole chloride ([Bmin]Cl) in reaction with Zn2+and Mn2+chlorides.For each salt studied, the structure was confirmed by mass spectrometry by electrospray ionization in negative mode (ESI(-)-MS); the catalytic effect of the process was calculated by calculating apparent activation energies (Ea) determined by Arrhenius curves reaching 36.49 kJ/mol and 58.09 kJ/mol respectively; the behavior of the residual PET by electron microscopy (SEM) was evaluated and greater degradation was observed in the presence of [Bmin]ZnCl3, justifying the higher catalytic efficiency in the process also in comparison to the literature; Finally, the Box-Behnken optimization model was appliedthroughtheresponse surface methodology (RSM), in which three factors (time, temperature and mass ratio of ethylene glycol) were studied in three levels of variation (-1, 0, +1) with two replicates of the central point, totaling 15 experiments in which yields were estimated in bis(2-hydroxyethyl) terephthalate monomers (BHET), greater than 50% under the conditions established with the increase of the 3 variables together. The glycolysis products were characterized by mass spectrometry (ESI-MS), spectroscopic techniques (FTIR) and (¹H and ¹³C NMR), X-ray diffraction (XRD) and thermal analysis (TGA) and(DSC). |
id |
UFES_148015923f664c6208a83fab66752648 |
---|---|
oai_identifier_str |
oai:repositorio.ufes.br:10/7324 |
network_acronym_str |
UFES |
network_name_str |
Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) |
repository_id_str |
2108 |
spelling |
Silva Filho, Eloi Alves daSilva, Carlos Vinícius GuimarãesBarthus, Rosangela CristinaSena, Denise Rocco de2018-08-01T21:36:54Z2018-08-012018-08-01T21:36:54Z2018-03-20In the present work, the post-consumption polyethylene terephthalate (PET) depolymerization process was carried out using the glycolysis method with ethylene glycol catalyzed by dialkylimidazole ionic liquids synthesized from 1-butyl-3-methylimidazole chloride ([Bmin]Cl) in reaction with Zn2+and Mn2+chlorides.For each salt studied, the structure was confirmed by mass spectrometry by electrospray ionization in negative mode (ESI(-)-MS); the catalytic effect of the process was calculated by calculating apparent activation energies (Ea) determined by Arrhenius curves reaching 36.49 kJ/mol and 58.09 kJ/mol respectively; the behavior of the residual PET by electron microscopy (SEM) was evaluated and greater degradation was observed in the presence of [Bmin]ZnCl3, justifying the higher catalytic efficiency in the process also in comparison to the literature; Finally, the Box-Behnken optimization model was appliedthroughtheresponse surface methodology (RSM), in which three factors (time, temperature and mass ratio of ethylene glycol) were studied in three levels of variation (-1, 0, +1) with two replicates of the central point, totaling 15 experiments in which yields were estimated in bis(2-hydroxyethyl) terephthalate monomers (BHET), greater than 50% under the conditions established with the increase of the 3 variables together. The glycolysis products were characterized by mass spectrometry (ESI-MS), spectroscopic techniques (FTIR) and (¹H and ¹³C NMR), X-ray diffraction (XRD) and thermal analysis (TGA) and(DSC).No presente trabalho foi realizado o processo de despolimerização de polietileno tereftalato (PET) pós-consumo, através do método de glicólise com etileno glicol catalisado por líquidos iônicos dialquil-imidazólicos, sintetizados a partir do cloreto de 1-butil-3-metilimidazol ([Bmin]Cl) em reação com cloretos de Zn2+ e Mn2+. Para cada sal estudado, confirmou-se a estrutura por espectrometria de massas por ionização de eletrospray em modo negativo (ESI(-)-MS); demonstrou-se o efeito catalítico do processo através do cálculo de energias de ativação aparentes (Ea) determinadas por curvas de Arrhenius alcançando os valores 36,49 kJ/mol e 58,09 kJ/mol respectivamente; avaliou-se o comportamento do PET residual por microscopia eletrônica (MEV) e foi observado maior degradação em presença de [Bmin]ZnCl3, justificando a maior eficiência catalítica no processo também em comparação às literaturas; por fim, aplicou-se o modelo de otimização Box-Behnken, através da metodologia de superfície de resposta (RSM), no qual foram estudados três fatores (tempo, temperatura e proporção em massa de etilenoglicol) em três níveis de variação (-1, 0, +1) com duas réplicas do ponto central, totalizando 15 experimentos em que estimaram-se rendimentos, em monômeros bis(2-hidróxietil) tereftalato (BHET), superiores a 50% nas condições fixas estabelecidas com o aumento das 3 variáveis em conjunto. Os produtos de glicólise foram caracterizados por espectrometria de massas (ESI-MS), técnicas espectroscópicas (FTIR) e (¹H e ¹³C RMN), difração de raios-X (DRX) e análise térmica (TGA) e (DSC).TextSILVA, Carlos Vinícius Guimarães. Glicólise de PET pós-consumo catalisada por líquidos iônicos. 2018. 76 f. Dissertação (Mestrado em Química) – Universidade Federal do Espírito Santo, Centro de Ciências Exatas, Vitória, 2018.http://repositorio.ufes.br/handle/10/7324porUniversidade Federal do Espírito SantoMestrado em QuímicaPrograma de Pós-Graduação em QuímicaUFESBRCentro de Ciências ExatasGlycolysisIonic liquidActivation energyDesign of experimentsPETGlicóliseLíquido iônicoEnergia de ativaçãoOtimização multivariadaPlanejamento de experimentosPlásticosPolímerosCatalisadores de metalQuímica54Glicólise de PET pós-consumo catalisada por líquidos iônicosGlycolysis of post-consumer PET catalyzed by ionic liquidsinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da Universidade Federal do Espírito Santo (riUfes)instname:Universidade Federal do Espírito Santo (UFES)instacron:UFESORIGINALCarlos Vinicius Guimarães.pdfapplication/pdf1904683http://repositorio.ufes.br/bitstreams/7e960551-c1e0-4284-aa1e-c2e1a4b21928/download55dee19f9f06bfb6d65db7c82da0e8bdMD5110/73242024-06-28 17:52:29.86oai:repositorio.ufes.br:10/7324http://repositorio.ufes.brRepositório InstitucionalPUBhttp://repositorio.ufes.br/oai/requestopendoar:21082024-06-28T17:52:29Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) - Universidade Federal do Espírito Santo (UFES)false |
dc.title.none.fl_str_mv |
Glicólise de PET pós-consumo catalisada por líquidos iônicos |
dc.title.alternative.none.fl_str_mv |
Glycolysis of post-consumer PET catalyzed by ionic liquids |
title |
Glicólise de PET pós-consumo catalisada por líquidos iônicos |
spellingShingle |
Glicólise de PET pós-consumo catalisada por líquidos iônicos Silva, Carlos Vinícius Guimarães Glycolysis Ionic liquid Activation energy Design of experiments PET Glicólise Líquido iônico Energia de ativação Otimização multivariada Planejamento de experimentos Química Plásticos Polímeros Catalisadores de metal 54 |
title_short |
Glicólise de PET pós-consumo catalisada por líquidos iônicos |
title_full |
Glicólise de PET pós-consumo catalisada por líquidos iônicos |
title_fullStr |
Glicólise de PET pós-consumo catalisada por líquidos iônicos |
title_full_unstemmed |
Glicólise de PET pós-consumo catalisada por líquidos iônicos |
title_sort |
Glicólise de PET pós-consumo catalisada por líquidos iônicos |
author |
Silva, Carlos Vinícius Guimarães |
author_facet |
Silva, Carlos Vinícius Guimarães |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Silva Filho, Eloi Alves da |
dc.contributor.author.fl_str_mv |
Silva, Carlos Vinícius Guimarães |
dc.contributor.referee1.fl_str_mv |
Barthus, Rosangela Cristina |
dc.contributor.referee2.fl_str_mv |
Sena, Denise Rocco de |
contributor_str_mv |
Silva Filho, Eloi Alves da Barthus, Rosangela Cristina Sena, Denise Rocco de |
dc.subject.eng.fl_str_mv |
Glycolysis Ionic liquid Activation energy Design of experiments |
topic |
Glycolysis Ionic liquid Activation energy Design of experiments PET Glicólise Líquido iônico Energia de ativação Otimização multivariada Planejamento de experimentos Química Plásticos Polímeros Catalisadores de metal 54 |
dc.subject.por.fl_str_mv |
PET Glicólise Líquido iônico Energia de ativação Otimização multivariada Planejamento de experimentos |
dc.subject.cnpq.fl_str_mv |
Química |
dc.subject.br-rjbn.none.fl_str_mv |
Plásticos Polímeros Catalisadores de metal |
dc.subject.udc.none.fl_str_mv |
54 |
description |
In the present work, the post-consumption polyethylene terephthalate (PET) depolymerization process was carried out using the glycolysis method with ethylene glycol catalyzed by dialkylimidazole ionic liquids synthesized from 1-butyl-3-methylimidazole chloride ([Bmin]Cl) in reaction with Zn2+and Mn2+chlorides.For each salt studied, the structure was confirmed by mass spectrometry by electrospray ionization in negative mode (ESI(-)-MS); the catalytic effect of the process was calculated by calculating apparent activation energies (Ea) determined by Arrhenius curves reaching 36.49 kJ/mol and 58.09 kJ/mol respectively; the behavior of the residual PET by electron microscopy (SEM) was evaluated and greater degradation was observed in the presence of [Bmin]ZnCl3, justifying the higher catalytic efficiency in the process also in comparison to the literature; Finally, the Box-Behnken optimization model was appliedthroughtheresponse surface methodology (RSM), in which three factors (time, temperature and mass ratio of ethylene glycol) were studied in three levels of variation (-1, 0, +1) with two replicates of the central point, totaling 15 experiments in which yields were estimated in bis(2-hydroxyethyl) terephthalate monomers (BHET), greater than 50% under the conditions established with the increase of the 3 variables together. The glycolysis products were characterized by mass spectrometry (ESI-MS), spectroscopic techniques (FTIR) and (¹H and ¹³C NMR), X-ray diffraction (XRD) and thermal analysis (TGA) and(DSC). |
publishDate |
2018 |
dc.date.accessioned.fl_str_mv |
2018-08-01T21:36:54Z |
dc.date.available.fl_str_mv |
2018-08-01 2018-08-01T21:36:54Z |
dc.date.issued.fl_str_mv |
2018-03-20 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
SILVA, Carlos Vinícius Guimarães. Glicólise de PET pós-consumo catalisada por líquidos iônicos. 2018. 76 f. Dissertação (Mestrado em Química) – Universidade Federal do Espírito Santo, Centro de Ciências Exatas, Vitória, 2018. |
dc.identifier.uri.fl_str_mv |
http://repositorio.ufes.br/handle/10/7324 |
identifier_str_mv |
SILVA, Carlos Vinícius Guimarães. Glicólise de PET pós-consumo catalisada por líquidos iônicos. 2018. 76 f. Dissertação (Mestrado em Química) – Universidade Federal do Espírito Santo, Centro de Ciências Exatas, Vitória, 2018. |
url |
http://repositorio.ufes.br/handle/10/7324 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
Text |
dc.publisher.none.fl_str_mv |
Universidade Federal do Espírito Santo Mestrado em Química |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Química |
dc.publisher.initials.fl_str_mv |
UFES |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Centro de Ciências Exatas |
publisher.none.fl_str_mv |
Universidade Federal do Espírito Santo Mestrado em Química |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) instname:Universidade Federal do Espírito Santo (UFES) instacron:UFES |
instname_str |
Universidade Federal do Espírito Santo (UFES) |
instacron_str |
UFES |
institution |
UFES |
reponame_str |
Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) |
collection |
Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) |
bitstream.url.fl_str_mv |
http://repositorio.ufes.br/bitstreams/7e960551-c1e0-4284-aa1e-c2e1a4b21928/download |
bitstream.checksum.fl_str_mv |
55dee19f9f06bfb6d65db7c82da0e8bd |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) - Universidade Federal do Espírito Santo (UFES) |
repository.mail.fl_str_mv |
|
_version_ |
1804309209194430464 |