Caracterização mecano tribológica e comportamento em corrosão de revestimentos depositados por atrito
Autor(a) principal: | |
---|---|
Data de Publicação: | 2010 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) |
Texto Completo: | http://repositorio.ufes.br/handle/10/4149 |
Resumo: | Many processes of friction welding have been studied, among which stands out a process known as Friction Surfacing. This technique consists on deposition of the material by one bolt at other material using increases rotations and forces. To perform it, an equipment from the Laboratory of Techniques in Friction and Wear of the Federal University of Uberlandia has been used, the Processing Unit of Pins for Friction (UPPA), which was able to repair things by friction, among them the filling trials (FHPP), which has been modified and implemented a control system of a platform, then allowing to accomplish the trials for coating with steel AISI 420, which are supplied to the controlling program the repairing parameters. The advantages of this technique are the excellent metallurgical bond among the materials associate to a refined structure. Through this technique is possible to apply different types of materials on substrates, resulting in increments on resistance against corrosion or erosion. The base material used was a carbon steel and the material of deposition was made of stainless steel AISI 420. The aim of this study is to evaluate the effect of the main parameters of the coating process’ variation, through the evaluation of the Scanning Electron Microscopyand Optical Microscopy’smicrostructure of the coated layer’s thickness, microhardness and evaluation of the resistance to the corrosion when submitted the tests of static Corrosion, Erosion and solids-free impingement.The results showed that there was a grain refinement in the affected heat zone, thereby increasing its hardness.The analysis of the coating showed resulted of higher wearand corrosion resistance when compared to the original material of the rod |
id |
UFES_25e6535b729a3b6ab34a175020249109 |
---|---|
oai_identifier_str |
oai:repositorio.ufes.br:10/4149 |
network_acronym_str |
UFES |
network_name_str |
Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) |
repository_id_str |
2108 |
spelling |
Franco, Sinésio DominguesMacêdo, Marcelo Camargo Severo deFerreira, Marcela GonçalvesAlbertin, EduardoSilva, Flávio José da2016-08-29T15:32:53Z2016-07-112016-08-29T15:32:53Z2010-12-20Many processes of friction welding have been studied, among which stands out a process known as Friction Surfacing. This technique consists on deposition of the material by one bolt at other material using increases rotations and forces. To perform it, an equipment from the Laboratory of Techniques in Friction and Wear of the Federal University of Uberlandia has been used, the Processing Unit of Pins for Friction (UPPA), which was able to repair things by friction, among them the filling trials (FHPP), which has been modified and implemented a control system of a platform, then allowing to accomplish the trials for coating with steel AISI 420, which are supplied to the controlling program the repairing parameters. The advantages of this technique are the excellent metallurgical bond among the materials associate to a refined structure. Through this technique is possible to apply different types of materials on substrates, resulting in increments on resistance against corrosion or erosion. The base material used was a carbon steel and the material of deposition was made of stainless steel AISI 420. The aim of this study is to evaluate the effect of the main parameters of the coating process’ variation, through the evaluation of the Scanning Electron Microscopyand Optical Microscopy’smicrostructure of the coated layer’s thickness, microhardness and evaluation of the resistance to the corrosion when submitted the tests of static Corrosion, Erosion and solids-free impingement.The results showed that there was a grain refinement in the affected heat zone, thereby increasing its hardness.The analysis of the coating showed resulted of higher wearand corrosion resistance when compared to the original material of the rodDiversos processos de reparo por atrito estão sendo estudados atualmente, dentre os quais se destaca o recobrimento por atrito ou, em inglês, Friction Surfacing. Esta técnica consiste na deposição do material de um pino em uma chapa ou substrato através de altas rotações e altas cargas axiais no pino, com um deslocamento horizontal do substrato. Durante o trabalho buscou-se caracterizar o revestimento depositado por atrito, através de ensaios de corrosão, jato de impingimento e análise microestrutural através de Microscopia Eletrônica de Varredura e Microscopia Óptica. Para isso, utilizou-se um equipamento do Laboratório de Técnicas em Atrito e Desgaste da Universidade Federal de Uberlândia, a Unidade de Processamento de Pinos por Atrito (UPPA), capaz de realizar reparos por atrito, dentre eles ensaios de preenchimento (FHPP), o qual foi modificado e implementado um sistema de controle de uma plataforma, possibilitando assim a realização dos ensaios de recobrimento com aço AISI 420, onde são fornecidos ao programa de controle os parâmetros de reparo. Entre as vantagens desse processo destacam-se a excelente união metalúrgica entre o recobrimento e o substrato, associada a uma microestrutura refinada. Através dessa técnica, pode-se então aplicar diferentes tipos de materiais sobre substratos, resultando em incrementos na resistência à corrosão e/ou desgaste. Como material base foi utilizado um aço carbono e como material de deposição foi utilizado o aço inoxidável martensítico AISI 420. O objetivo deste trabalho foi avaliar os efeitos da variação dos principais parâmetros de processo no revestimento, por meio da avaliação da microestrutura, espessura da camada revestida, microdureza e avaliação da resistência à corrosão quando submetido a testes de Corrosão estática e Jato de impingimento. Os resultados mostraram que houve um refino de grão na zona afetada pelo calor, aumentando assim a sua dureza. Finalmente, da análise do revestimento obtiveram-se resultados de desgaste e resistência à corrosão satisfatória, quando comparado ao material utilizado como revestimento.TextFERREIRA, Marcela Gonçalves. Caracterização mecano tribológica e comportamento em corrosão de revestimentos depositados por atrito. 2010. 77 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal do Espírito Santo, Centro Tecnológico, Vitória, 2010.http://repositorio.ufes.br/handle/10/4149porUniversidade Federal do Espírito SantoMestrado em Engenharia MecânicaPrograma de Pós-Graduação em Engenharia MecânicaUFESBRCentro TecnológicoFriction surfacingHard coatingsAISI 420Revestimento por atritoErosãoCorrosãoRevestimentosTribologiaEngenharia Mecânica621Caracterização mecano tribológica e comportamento em corrosão de revestimentos depositados por atritoinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da Universidade Federal do Espírito Santo (riUfes)instname:Universidade Federal do Espírito Santo (UFES)instacron:UFESORIGINALDISSERTAÇÃO Marcela G Ferreira - IMPRESSÃO 2 - PDF 2.pdfapplication/pdf4143871http://repositorio.ufes.br/bitstreams/72fa3aec-6b87-47d0-a007-8e972e4b80de/downloaded1f902dd2d1ee7ad94bef5ab9cc5743MD5110/41492024-06-28 16:09:04.699oai:repositorio.ufes.br:10/4149http://repositorio.ufes.brRepositório InstitucionalPUBhttp://repositorio.ufes.br/oai/requestopendoar:21082024-06-28T16:09:04Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) - Universidade Federal do Espírito Santo (UFES)false |
dc.title.none.fl_str_mv |
Caracterização mecano tribológica e comportamento em corrosão de revestimentos depositados por atrito |
title |
Caracterização mecano tribológica e comportamento em corrosão de revestimentos depositados por atrito |
spellingShingle |
Caracterização mecano tribológica e comportamento em corrosão de revestimentos depositados por atrito Ferreira, Marcela Gonçalves Friction surfacing Hard coatings AISI 420 Revestimento por atrito Erosão Corrosão Engenharia Mecânica Revestimentos Tribologia 621 |
title_short |
Caracterização mecano tribológica e comportamento em corrosão de revestimentos depositados por atrito |
title_full |
Caracterização mecano tribológica e comportamento em corrosão de revestimentos depositados por atrito |
title_fullStr |
Caracterização mecano tribológica e comportamento em corrosão de revestimentos depositados por atrito |
title_full_unstemmed |
Caracterização mecano tribológica e comportamento em corrosão de revestimentos depositados por atrito |
title_sort |
Caracterização mecano tribológica e comportamento em corrosão de revestimentos depositados por atrito |
author |
Ferreira, Marcela Gonçalves |
author_facet |
Ferreira, Marcela Gonçalves |
author_role |
author |
dc.contributor.advisor-co1.fl_str_mv |
Franco, Sinésio Domingues |
dc.contributor.advisor1.fl_str_mv |
Macêdo, Marcelo Camargo Severo de |
dc.contributor.author.fl_str_mv |
Ferreira, Marcela Gonçalves |
dc.contributor.referee1.fl_str_mv |
Albertin, Eduardo |
dc.contributor.referee2.fl_str_mv |
Silva, Flávio José da |
contributor_str_mv |
Franco, Sinésio Domingues Macêdo, Marcelo Camargo Severo de Albertin, Eduardo Silva, Flávio José da |
dc.subject.eng.fl_str_mv |
Friction surfacing Hard coatings |
topic |
Friction surfacing Hard coatings AISI 420 Revestimento por atrito Erosão Corrosão Engenharia Mecânica Revestimentos Tribologia 621 |
dc.subject.por.fl_str_mv |
AISI 420 Revestimento por atrito Erosão Corrosão |
dc.subject.cnpq.fl_str_mv |
Engenharia Mecânica |
dc.subject.br-rjbn.none.fl_str_mv |
Revestimentos Tribologia |
dc.subject.udc.none.fl_str_mv |
621 |
description |
Many processes of friction welding have been studied, among which stands out a process known as Friction Surfacing. This technique consists on deposition of the material by one bolt at other material using increases rotations and forces. To perform it, an equipment from the Laboratory of Techniques in Friction and Wear of the Federal University of Uberlandia has been used, the Processing Unit of Pins for Friction (UPPA), which was able to repair things by friction, among them the filling trials (FHPP), which has been modified and implemented a control system of a platform, then allowing to accomplish the trials for coating with steel AISI 420, which are supplied to the controlling program the repairing parameters. The advantages of this technique are the excellent metallurgical bond among the materials associate to a refined structure. Through this technique is possible to apply different types of materials on substrates, resulting in increments on resistance against corrosion or erosion. The base material used was a carbon steel and the material of deposition was made of stainless steel AISI 420. The aim of this study is to evaluate the effect of the main parameters of the coating process’ variation, through the evaluation of the Scanning Electron Microscopyand Optical Microscopy’smicrostructure of the coated layer’s thickness, microhardness and evaluation of the resistance to the corrosion when submitted the tests of static Corrosion, Erosion and solids-free impingement.The results showed that there was a grain refinement in the affected heat zone, thereby increasing its hardness.The analysis of the coating showed resulted of higher wearand corrosion resistance when compared to the original material of the rod |
publishDate |
2010 |
dc.date.issued.fl_str_mv |
2010-12-20 |
dc.date.accessioned.fl_str_mv |
2016-08-29T15:32:53Z |
dc.date.available.fl_str_mv |
2016-07-11 2016-08-29T15:32:53Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
FERREIRA, Marcela Gonçalves. Caracterização mecano tribológica e comportamento em corrosão de revestimentos depositados por atrito. 2010. 77 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal do Espírito Santo, Centro Tecnológico, Vitória, 2010. |
dc.identifier.uri.fl_str_mv |
http://repositorio.ufes.br/handle/10/4149 |
identifier_str_mv |
FERREIRA, Marcela Gonçalves. Caracterização mecano tribológica e comportamento em corrosão de revestimentos depositados por atrito. 2010. 77 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal do Espírito Santo, Centro Tecnológico, Vitória, 2010. |
url |
http://repositorio.ufes.br/handle/10/4149 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
Text |
dc.publisher.none.fl_str_mv |
Universidade Federal do Espírito Santo Mestrado em Engenharia Mecânica |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Mecânica |
dc.publisher.initials.fl_str_mv |
UFES |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Centro Tecnológico |
publisher.none.fl_str_mv |
Universidade Federal do Espírito Santo Mestrado em Engenharia Mecânica |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) instname:Universidade Federal do Espírito Santo (UFES) instacron:UFES |
instname_str |
Universidade Federal do Espírito Santo (UFES) |
instacron_str |
UFES |
institution |
UFES |
reponame_str |
Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) |
collection |
Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) |
bitstream.url.fl_str_mv |
http://repositorio.ufes.br/bitstreams/72fa3aec-6b87-47d0-a007-8e972e4b80de/download |
bitstream.checksum.fl_str_mv |
ed1f902dd2d1ee7ad94bef5ab9cc5743 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 |
repository.name.fl_str_mv |
Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) - Universidade Federal do Espírito Santo (UFES) |
repository.mail.fl_str_mv |
|
_version_ |
1804309197607665664 |