Desenvolvimento de nova técnica de interrogação e análise analítica aplicadas a sensores interferométricos em fibra

Detalhes bibliográficos
Autor(a) principal: Scandian, Lorenzo Bortolon
Data de Publicação: 2019
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Repositório Institucional da Universidade Federal do Espírito Santo (riUfes)
Texto Completo: http://repositorio.ufes.br/handle/10/11306
Resumo: The use of sensitive devices is of great importance from industrial applications, such as in fuel storage systems, biochemical processing, and even in medicine. Most of the sensors currently in operation have traditional operability principles, being based on mechanical and electrical techniques. As a result, their applicabilities are restricted when used in some type of environment. In addition, often their manufacturing costs may not be accessible due to the complexities required in their constructions and their sensitivities and resolutions may not be as great as needed. The need for a sensor without the aforementioned restrictions boosted research in the area of optical sensing so that the use of optical fiber for measurements has been used for some years. Many limitations, costs and risks are considerably reduced with this technology. Among the wide range of available optical sensors, those who use interferometric interrogations often excel in this area because of their superior sensitivities and satisfactorily stable measurements. They also offer a variety of spectrum analysis techniques. However, one of the limitations of this type of sensor is related to its length. In general, fiber sensors commonly lack the ability to perform distributed measurements of liquid levels, for example, to lengths of a few tens of centimeters, accurately. This dissertation proposes to investigate the viability of a liquid level sensor based on interferometric phenomena in optical fiber for measurements greater than 120 mm using a spectral analysis based on the use of the amplitude of the spectrum curves originated to the detriment of the interference phenomena. The main aspect to be addressed is the investigation of the feasibility of using the information of the variation of the amplitudes of these curves, already provided by the prospecting of existing interferometric sensors, as useful content to be analyzed in order to assert a valid relation between this variation of amplitude and the change of liquid level in a given container, characterizing the construction of a sensor. It is also part of the scope of this dissertation to demonstrate how a simple analytic computational model using plane waves can, in this specific case, result in reliable predictions of measurements for sensors of different lengths.
id UFES_ffea7679bda81e35e437c4fcf22b9e32
oai_identifier_str oai:repositorio.ufes.br:10/11306
network_acronym_str UFES
network_name_str Repositório Institucional da Universidade Federal do Espírito Santo (riUfes)
repository_id_str 2108
spelling Segatto, Marcelo Eduardo VieiraScandian, Lorenzo BortolonRodríguez Díaz, Camilo ArturoSilva, Jean Carlos Cardozo da2019-07-06T02:15:32Z2019-07-052019-07-06T02:15:32Z2019-04-05The use of sensitive devices is of great importance from industrial applications, such as in fuel storage systems, biochemical processing, and even in medicine. Most of the sensors currently in operation have traditional operability principles, being based on mechanical and electrical techniques. As a result, their applicabilities are restricted when used in some type of environment. In addition, often their manufacturing costs may not be accessible due to the complexities required in their constructions and their sensitivities and resolutions may not be as great as needed. The need for a sensor without the aforementioned restrictions boosted research in the area of optical sensing so that the use of optical fiber for measurements has been used for some years. Many limitations, costs and risks are considerably reduced with this technology. Among the wide range of available optical sensors, those who use interferometric interrogations often excel in this area because of their superior sensitivities and satisfactorily stable measurements. They also offer a variety of spectrum analysis techniques. However, one of the limitations of this type of sensor is related to its length. In general, fiber sensors commonly lack the ability to perform distributed measurements of liquid levels, for example, to lengths of a few tens of centimeters, accurately. This dissertation proposes to investigate the viability of a liquid level sensor based on interferometric phenomena in optical fiber for measurements greater than 120 mm using a spectral analysis based on the use of the amplitude of the spectrum curves originated to the detriment of the interference phenomena. The main aspect to be addressed is the investigation of the feasibility of using the information of the variation of the amplitudes of these curves, already provided by the prospecting of existing interferometric sensors, as useful content to be analyzed in order to assert a valid relation between this variation of amplitude and the change of liquid level in a given container, characterizing the construction of a sensor. It is also part of the scope of this dissertation to demonstrate how a simple analytic computational model using plane waves can, in this specific case, result in reliable predictions of measurements for sensors of different lengths.O uso de dispositivos sensitivos é de grande importância desde aplicações industriais, como em sistemas de armazenamento de combustível e processamento bioquímico, até na medicina. Grande parte dos sensores atualmente em funcionamento possui princípios de operabilidade tradicionais, sendo baseados em técnicas mecânicas e elétricas. Como consequência disso, suas aplicabilidades são restritas quando utilizados em alguns ambientes. Além disso, muitas vezes seus custos de fabricação podem não estar acessíveis devido às complexidades exigidas em suas construções e suas sensibilidades e resoluções podem não ser suficientemente elevadas. A necessidade de um sensor sem as restrições mencionadas impulsionou pesquisas na área de sensoriamento ótico de forma que o uso de fibra ótica para medições já é usado há algumas décadas. Muitas limitações, custos e riscos podem ser consideravelmente reduzidos com essa tecnologia. Dentre a enorme gama de sensores óticos disponíveis, aqueles que utilizam interrogações interferométricas muitas vezes se destacam nesse meio por apresentarem sensibilidades superiores e medições satisfatoriamente estáveis, além de oferecerem diversas técnicas de análise de espectro. Porém, uma das limitações deste tipo de sensor, refere-se ao seu comprimento. Em geral, sensores em fibra comumente não possuem a capacidade de realizar medições distribuídas de níveis de líquidos, por exemplo, por comprimentos de algumas dezenas de centímetros, com precisão. O presente projeto de pesquisa propõe investigar a viabilidade de um sensor de nível baseado em fenômenos interferométricos em fibra ótica para medições superiores a 120 mm utilizando-se uma análise espectral que se fundamenta no emprego da amplitude das curvas de espectro originadas pelo fenômeno de interferência. O principal aspecto a ser abordado é a averiguação da exequibilidade de se utilizar a informação da variação das amplitudes dessas curvas, já providas pelo estudo de sensores interferométricos existentes, como conteúdo útil a ser analisado de forma a assentir uma relação válida entre essa variação de amplitude e a mudança de nível de líquido em um determinado recipiente, caracterizando a confecção de um sensor. Faz, também, parte do escopo dessa dissertação demonstrar como um simples modelo computacional analítico que se utiliza de ondas planas pode, para este caso específico, resultar em previsões confiáveis de medições para sensores de diversos comprimentos.Texthttp://repositorio.ufes.br/handle/10/11306porUniversidade Federal do Espírito SantoMestrado em Engenharia ElétricaPrograma de Pós-Graduação em Engenharia ElétricaUFESBRCentro TecnológicoDetectoresFibra óticaDetectores óticosInterferômetrosEngenharia Elétrica621.3Desenvolvimento de nova técnica de interrogação e análise analítica aplicadas a sensores interferométricos em fibrainfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da Universidade Federal do Espírito Santo (riUfes)instname:Universidade Federal do Espírito Santo (UFES)instacron:UFESORIGINALtese_12124_LORENZO BORTOLON SCANDIAN - Dissertação de Mestrado20190705-60036.pdfapplication/pdf2067978http://repositorio.ufes.br/bitstreams/cd4df3b3-f4ce-4617-aa8d-114d5233954b/download72e7e8f08e5ac77f42bcb587fbea4eb5MD5110/113062024-06-28 16:08:00.482oai:repositorio.ufes.br:10/11306http://repositorio.ufes.brRepositório InstitucionalPUBhttp://repositorio.ufes.br/oai/requestopendoar:21082024-06-28T16:08Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) - Universidade Federal do Espírito Santo (UFES)false
dc.title.none.fl_str_mv Desenvolvimento de nova técnica de interrogação e análise analítica aplicadas a sensores interferométricos em fibra
title Desenvolvimento de nova técnica de interrogação e análise analítica aplicadas a sensores interferométricos em fibra
spellingShingle Desenvolvimento de nova técnica de interrogação e análise analítica aplicadas a sensores interferométricos em fibra
Scandian, Lorenzo Bortolon
Engenharia Elétrica
Detectores
Fibra ótica
Detectores óticos
Interferômetros
621.3
title_short Desenvolvimento de nova técnica de interrogação e análise analítica aplicadas a sensores interferométricos em fibra
title_full Desenvolvimento de nova técnica de interrogação e análise analítica aplicadas a sensores interferométricos em fibra
title_fullStr Desenvolvimento de nova técnica de interrogação e análise analítica aplicadas a sensores interferométricos em fibra
title_full_unstemmed Desenvolvimento de nova técnica de interrogação e análise analítica aplicadas a sensores interferométricos em fibra
title_sort Desenvolvimento de nova técnica de interrogação e análise analítica aplicadas a sensores interferométricos em fibra
author Scandian, Lorenzo Bortolon
author_facet Scandian, Lorenzo Bortolon
author_role author
dc.contributor.advisor1.fl_str_mv Segatto, Marcelo Eduardo Vieira
dc.contributor.author.fl_str_mv Scandian, Lorenzo Bortolon
dc.contributor.referee1.fl_str_mv Rodríguez Díaz, Camilo Arturo
dc.contributor.referee2.fl_str_mv Silva, Jean Carlos Cardozo da
contributor_str_mv Segatto, Marcelo Eduardo Vieira
Rodríguez Díaz, Camilo Arturo
Silva, Jean Carlos Cardozo da
dc.subject.cnpq.fl_str_mv Engenharia Elétrica
topic Engenharia Elétrica
Detectores
Fibra ótica
Detectores óticos
Interferômetros
621.3
dc.subject.br-rjbn.none.fl_str_mv Detectores
Fibra ótica
Detectores óticos
Interferômetros
dc.subject.udc.none.fl_str_mv 621.3
description The use of sensitive devices is of great importance from industrial applications, such as in fuel storage systems, biochemical processing, and even in medicine. Most of the sensors currently in operation have traditional operability principles, being based on mechanical and electrical techniques. As a result, their applicabilities are restricted when used in some type of environment. In addition, often their manufacturing costs may not be accessible due to the complexities required in their constructions and their sensitivities and resolutions may not be as great as needed. The need for a sensor without the aforementioned restrictions boosted research in the area of optical sensing so that the use of optical fiber for measurements has been used for some years. Many limitations, costs and risks are considerably reduced with this technology. Among the wide range of available optical sensors, those who use interferometric interrogations often excel in this area because of their superior sensitivities and satisfactorily stable measurements. They also offer a variety of spectrum analysis techniques. However, one of the limitations of this type of sensor is related to its length. In general, fiber sensors commonly lack the ability to perform distributed measurements of liquid levels, for example, to lengths of a few tens of centimeters, accurately. This dissertation proposes to investigate the viability of a liquid level sensor based on interferometric phenomena in optical fiber for measurements greater than 120 mm using a spectral analysis based on the use of the amplitude of the spectrum curves originated to the detriment of the interference phenomena. The main aspect to be addressed is the investigation of the feasibility of using the information of the variation of the amplitudes of these curves, already provided by the prospecting of existing interferometric sensors, as useful content to be analyzed in order to assert a valid relation between this variation of amplitude and the change of liquid level in a given container, characterizing the construction of a sensor. It is also part of the scope of this dissertation to demonstrate how a simple analytic computational model using plane waves can, in this specific case, result in reliable predictions of measurements for sensors of different lengths.
publishDate 2019
dc.date.accessioned.fl_str_mv 2019-07-06T02:15:32Z
dc.date.available.fl_str_mv 2019-07-05
2019-07-06T02:15:32Z
dc.date.issued.fl_str_mv 2019-04-05
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://repositorio.ufes.br/handle/10/11306
url http://repositorio.ufes.br/handle/10/11306
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv Text
dc.publisher.none.fl_str_mv Universidade Federal do Espírito Santo
Mestrado em Engenharia Elétrica
dc.publisher.program.fl_str_mv Programa de Pós-Graduação em Engenharia Elétrica
dc.publisher.initials.fl_str_mv UFES
dc.publisher.country.fl_str_mv BR
dc.publisher.department.fl_str_mv Centro Tecnológico
publisher.none.fl_str_mv Universidade Federal do Espírito Santo
Mestrado em Engenharia Elétrica
dc.source.none.fl_str_mv reponame:Repositório Institucional da Universidade Federal do Espírito Santo (riUfes)
instname:Universidade Federal do Espírito Santo (UFES)
instacron:UFES
instname_str Universidade Federal do Espírito Santo (UFES)
instacron_str UFES
institution UFES
reponame_str Repositório Institucional da Universidade Federal do Espírito Santo (riUfes)
collection Repositório Institucional da Universidade Federal do Espírito Santo (riUfes)
bitstream.url.fl_str_mv http://repositorio.ufes.br/bitstreams/cd4df3b3-f4ce-4617-aa8d-114d5233954b/download
bitstream.checksum.fl_str_mv 72e7e8f08e5ac77f42bcb587fbea4eb5
bitstream.checksumAlgorithm.fl_str_mv MD5
repository.name.fl_str_mv Repositório Institucional da Universidade Federal do Espírito Santo (riUfes) - Universidade Federal do Espírito Santo (UFES)
repository.mail.fl_str_mv
_version_ 1804309184067403776