O estudo do crescimento de grão em uma liga Al-1 % massa Mn
Autor(a) principal: | |
---|---|
Data de Publicação: | 2007 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Repositório Institucional da Universidade Federal Fluminense (RIUFF) |
Texto Completo: | https://app.uff.br/riuff/handle/1/17570 |
Resumo: | Grain growth was studied in detail in a high purity Al-1mass% Mn alloy containing particles. This thesis contains an introduction, a literature survey, materials and methods and five chapters about: grain geometry, precipitate characterization, influence of the precipitates in the grain boundary pinning, abnormal grain growth and the effect of thickness on grain growth. In chapter 4, grain geometry, the measures of the three grain curvatures are presented. Geometrical models relating these three quantities to the mean intercept length of the grains, l, were derived. The models showed good agreement with experimental data. After precipitate characterization done in chapter 5, the influence of the precipitates on grain boundary pinning was studied in chapter 6. The usual expression to calculate the limiting or critical grain radius due to the pinning by precipitates uses quantities that are not very convenient for comparison with experimental results. In this work two alternative expressions are proposed. Good agreement is obtained between theory and experiments. The relative merits and shortcomings of each expression are discussed in detail from a fundamental and experimental point of view. During abnormal grain growth, in contrast with the normal grain growth, only few large grains dominate the grain growth process. Chapter 7 deals with the evolution of the abnormal grains and the influence of these grains in the normal grains geometry. In chapter 8, the effect of thickness on grain growth and on the geometry of grains was studied. Finally the work was summarized and its main conclusions were presented. |
id |
UFF-2_58229d5dc2d971083de2457548569ecd |
---|---|
oai_identifier_str |
oai:app.uff.br:1/17570 |
network_acronym_str |
UFF-2 |
network_name_str |
Repositório Institucional da Universidade Federal Fluminense (RIUFF) |
repository_id_str |
2120 |
spelling |
O estudo do crescimento de grão em uma liga Al-1 % massa MnMetalurgia físicaCrescimento de grãoGeometriaAncoramento por partículaCurvaturasModelamentoEfeito da espessuraCrescimento normal de grãoCrescimento anormal de grãoModelosPrecipitadosAncoramentoNormal grain growthAbnormal grain growthGeometryCurvatureModelsPrecipitatesPinningThickness effectCNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICAGrain growth was studied in detail in a high purity Al-1mass% Mn alloy containing particles. This thesis contains an introduction, a literature survey, materials and methods and five chapters about: grain geometry, precipitate characterization, influence of the precipitates in the grain boundary pinning, abnormal grain growth and the effect of thickness on grain growth. In chapter 4, grain geometry, the measures of the three grain curvatures are presented. Geometrical models relating these three quantities to the mean intercept length of the grains, l, were derived. The models showed good agreement with experimental data. After precipitate characterization done in chapter 5, the influence of the precipitates on grain boundary pinning was studied in chapter 6. The usual expression to calculate the limiting or critical grain radius due to the pinning by precipitates uses quantities that are not very convenient for comparison with experimental results. In this work two alternative expressions are proposed. Good agreement is obtained between theory and experiments. The relative merits and shortcomings of each expression are discussed in detail from a fundamental and experimental point of view. During abnormal grain growth, in contrast with the normal grain growth, only few large grains dominate the grain growth process. Chapter 7 deals with the evolution of the abnormal grains and the influence of these grains in the normal grains geometry. In chapter 8, the effect of thickness on grain growth and on the geometry of grains was studied. Finally the work was summarized and its main conclusions were presented.Conselho Nacional de Desenvolvimento Cientifico e TecnológicoO crescimento de grão é estudado detalhadamente em uma liga Al-1% massa Mn de alta pureza com a presença de partículas. A tese contém: uma introdução, uma revisão bibliográfica, materiais e métodos e cinco capítulos sobre: geometria dos grãos, caracterização dos precipitados, influência dos precipitados no ancoramento dos contornos de grão, crescimento anormal de grão e o efeito da espessura no crescimento de grão. No capítulo 4, geometria dos grãos, as medidas das três curvaturas são apresentadas. Modelos geométricos são derivados relatando essas três quantidades com o comprimento médio das intersecções dos grãos, l. Os modelos apresentam uma boa concordância com os dados experimentais. Após a caracterização dos precipitados, discutida no capítulo 5, a influência desses precipitados no ancoramento dos contornos de grão foi estudada no capítulo 6. A expressão usual para calcular o raio limite ou crítico do grão devido ao ancoramento de partícula utiliza uma formulação não muito conveniente para comparação com resultados experimentais. Neste trabalho duas expressões alternativas são propostas. Boa concordância é obtida entre teoria e os experimentos Os méritos e deméritos de cada expressão são discutidos em detalhe tanto do ponto de vista fundamental quanto experimental. Durante o crescimento anormal de grão, em contraste com o crescimento normal de grão, somente poucos grãos grandes dominam o processo de crescimento. O capítulo 7 trata da evolução dos grãos anormais e a influência desses grãos na geometria dos grãos normais. No capítulo 8, o efeito da espessura no crescimento de grão e na geometria desses grãos foi estudado. Ao final do trabalho, as suas principais conclusões são apresentadas.Programa de Pós-graduação em Engenharia MetalúrgicaEngenharia metalúrgicaRios, Paulo RangelCPF:04890879622http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783612D6Santos, Dagoberto BrandãoCPF:20751266522http://lattes.cnpq.br/9258600363992264Sandim, Hugo Ricardo ZschommlerCPF:20752366622http://lattes.cnpq.br/9725501529378304Ferreira, FlávioCPF:01445333122http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4793966U9Campos, Marcos Flavio deCPF:20855545522http://lattes.cnpq.br/5526383460332378Fonseca, Gláucio Soares da2021-03-10T20:42:05Z2007-11-092021-03-10T20:42:05Z2007-09-20info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfhttps://app.uff.br/riuff/handle/1/17570porCC-BY-SAinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da Universidade Federal Fluminense (RIUFF)instname:Universidade Federal Fluminense (UFF)instacron:UFF2021-03-10T20:42:05Zoai:app.uff.br:1/17570Repositório InstitucionalPUBhttps://app.uff.br/oai/requestriuff@id.uff.bropendoar:21202021-03-10T20:42:05Repositório Institucional da Universidade Federal Fluminense (RIUFF) - Universidade Federal Fluminense (UFF)false |
dc.title.none.fl_str_mv |
O estudo do crescimento de grão em uma liga Al-1 % massa Mn |
title |
O estudo do crescimento de grão em uma liga Al-1 % massa Mn |
spellingShingle |
O estudo do crescimento de grão em uma liga Al-1 % massa Mn Fonseca, Gláucio Soares da Metalurgia física Crescimento de grão Geometria Ancoramento por partícula Curvaturas Modelamento Efeito da espessura Crescimento normal de grão Crescimento anormal de grão Modelos Precipitados Ancoramento Normal grain growth Abnormal grain growth Geometry Curvature Models Precipitates Pinning Thickness effect CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
title_short |
O estudo do crescimento de grão em uma liga Al-1 % massa Mn |
title_full |
O estudo do crescimento de grão em uma liga Al-1 % massa Mn |
title_fullStr |
O estudo do crescimento de grão em uma liga Al-1 % massa Mn |
title_full_unstemmed |
O estudo do crescimento de grão em uma liga Al-1 % massa Mn |
title_sort |
O estudo do crescimento de grão em uma liga Al-1 % massa Mn |
author |
Fonseca, Gláucio Soares da |
author_facet |
Fonseca, Gláucio Soares da |
author_role |
author |
dc.contributor.none.fl_str_mv |
Rios, Paulo Rangel CPF:04890879622 http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783612D6 Santos, Dagoberto Brandão CPF:20751266522 http://lattes.cnpq.br/9258600363992264 Sandim, Hugo Ricardo Zschommler CPF:20752366622 http://lattes.cnpq.br/9725501529378304 Ferreira, Flávio CPF:01445333122 http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4793966U9 Campos, Marcos Flavio de CPF:20855545522 http://lattes.cnpq.br/5526383460332378 |
dc.contributor.author.fl_str_mv |
Fonseca, Gláucio Soares da |
dc.subject.por.fl_str_mv |
Metalurgia física Crescimento de grão Geometria Ancoramento por partícula Curvaturas Modelamento Efeito da espessura Crescimento normal de grão Crescimento anormal de grão Modelos Precipitados Ancoramento Normal grain growth Abnormal grain growth Geometry Curvature Models Precipitates Pinning Thickness effect CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
topic |
Metalurgia física Crescimento de grão Geometria Ancoramento por partícula Curvaturas Modelamento Efeito da espessura Crescimento normal de grão Crescimento anormal de grão Modelos Precipitados Ancoramento Normal grain growth Abnormal grain growth Geometry Curvature Models Precipitates Pinning Thickness effect CNPQ::ENGENHARIAS::ENGENHARIA DE MATERIAIS E METALURGICA |
description |
Grain growth was studied in detail in a high purity Al-1mass% Mn alloy containing particles. This thesis contains an introduction, a literature survey, materials and methods and five chapters about: grain geometry, precipitate characterization, influence of the precipitates in the grain boundary pinning, abnormal grain growth and the effect of thickness on grain growth. In chapter 4, grain geometry, the measures of the three grain curvatures are presented. Geometrical models relating these three quantities to the mean intercept length of the grains, l, were derived. The models showed good agreement with experimental data. After precipitate characterization done in chapter 5, the influence of the precipitates on grain boundary pinning was studied in chapter 6. The usual expression to calculate the limiting or critical grain radius due to the pinning by precipitates uses quantities that are not very convenient for comparison with experimental results. In this work two alternative expressions are proposed. Good agreement is obtained between theory and experiments. The relative merits and shortcomings of each expression are discussed in detail from a fundamental and experimental point of view. During abnormal grain growth, in contrast with the normal grain growth, only few large grains dominate the grain growth process. Chapter 7 deals with the evolution of the abnormal grains and the influence of these grains in the normal grains geometry. In chapter 8, the effect of thickness on grain growth and on the geometry of grains was studied. Finally the work was summarized and its main conclusions were presented. |
publishDate |
2007 |
dc.date.none.fl_str_mv |
2007-11-09 2007-09-20 2021-03-10T20:42:05Z 2021-03-10T20:42:05Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://app.uff.br/riuff/handle/1/17570 |
url |
https://app.uff.br/riuff/handle/1/17570 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
CC-BY-SA info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
CC-BY-SA |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Programa de Pós-graduação em Engenharia Metalúrgica Engenharia metalúrgica |
publisher.none.fl_str_mv |
Programa de Pós-graduação em Engenharia Metalúrgica Engenharia metalúrgica |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da Universidade Federal Fluminense (RIUFF) instname:Universidade Federal Fluminense (UFF) instacron:UFF |
instname_str |
Universidade Federal Fluminense (UFF) |
instacron_str |
UFF |
institution |
UFF |
reponame_str |
Repositório Institucional da Universidade Federal Fluminense (RIUFF) |
collection |
Repositório Institucional da Universidade Federal Fluminense (RIUFF) |
repository.name.fl_str_mv |
Repositório Institucional da Universidade Federal Fluminense (RIUFF) - Universidade Federal Fluminense (UFF) |
repository.mail.fl_str_mv |
riuff@id.uff.br |
_version_ |
1802135457971044352 |