Garantia contínua e sistêmica da qualidade nas calibrações realizadas pelo laboratório de metrologia dimensional do inmetro: uma proposta de metodologia de implantação
Autor(a) principal: | |
---|---|
Data de Publicação: | 2004 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da Universidade Federal Fluminense (RIUFF) |
Texto Completo: | https://app.uff.br/riuff/handle/1/21277 |
Resumo: | The National Metrology Institutes (NMI) have the commitment to disseminate the units of the International System of Units (SI) with the required metrological confidence to their services users, as we!! as to evidence technica! competence, through the compatibility of results with their c.ongeners, aiming the Mutual Recognition Arrangement (MRA) coordinated by the Bureau Intemational des Poids et Mesures (BIPM). As the reference Iaboratory in the dimensional metrology area in the country, the Dimensiona! Metro!ogy Laboratory (LAMIN) has this commitment. Due to the difficu!ty to attend abso!ute and effectively some technica! requirements of the ISO/IEC 17025 standard (in special the 5.9), that talks about the Assuring the Quality of Test and Calibration Results , and by the difficulty to obtain information about this subject with other NMI, arose the motivation for the deve!opment of a generic methodology that cou!d a!!ow LAMIN s measurement processes ana!ysis and verify if they present the necessary confidence and accuracy to the ca!ibration activities performance. The technical requirements of the mentioned standard and relevant concepts contained in the ISO/TS 14253-2 standard were taken into consideration for the methodology development. It was made a ca!ibration process analysis of a vertical sma!l displacements generator, main element, that together with a sine bar compose a small ang!es generator. This one is LAMIN s reference standard to the dissemination of the measurement units of the Plane Angle quantity and which gives traceability to several angle measurement processes, reason why this process was chosen to be studied. |
id |
UFF-2_5b7b90adca1b5579983ae012afdadc63 |
---|---|
oai_identifier_str |
oai:app.uff.br:1/21277 |
network_acronym_str |
UFF-2 |
network_name_str |
Repositório Institucional da Universidade Federal Fluminense (RIUFF) |
repository_id_str |
2120 |
spelling |
Garantia contínua e sistêmica da qualidade nas calibrações realizadas pelo laboratório de metrologia dimensional do inmetro: uma proposta de metodologia de implantaçãoConfiabilidade MetrológicaExatidãoCompatibilidade e Qualidade de ResultadosMetro!ogical ConfidenceAccuracyCompatibility and Quality of ResultsCNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAOThe National Metrology Institutes (NMI) have the commitment to disseminate the units of the International System of Units (SI) with the required metrological confidence to their services users, as we!! as to evidence technica! competence, through the compatibility of results with their c.ongeners, aiming the Mutual Recognition Arrangement (MRA) coordinated by the Bureau Intemational des Poids et Mesures (BIPM). As the reference Iaboratory in the dimensional metrology area in the country, the Dimensiona! Metro!ogy Laboratory (LAMIN) has this commitment. Due to the difficu!ty to attend abso!ute and effectively some technica! requirements of the ISO/IEC 17025 standard (in special the 5.9), that talks about the Assuring the Quality of Test and Calibration Results , and by the difficulty to obtain information about this subject with other NMI, arose the motivation for the deve!opment of a generic methodology that cou!d a!!ow LAMIN s measurement processes ana!ysis and verify if they present the necessary confidence and accuracy to the ca!ibration activities performance. The technical requirements of the mentioned standard and relevant concepts contained in the ISO/TS 14253-2 standard were taken into consideration for the methodology development. It was made a ca!ibration process analysis of a vertical sma!l displacements generator, main element, that together with a sine bar compose a small ang!es generator. This one is LAMIN s reference standard to the dissemination of the measurement units of the Plane Angle quantity and which gives traceability to several angle measurement processes, reason why this process was chosen to be studied.Universidade Federal FluminenseOs Institutos Nacionais de Metrologia (INM), cujo termo em inglês é National Metrology Institutes (NMI), têm o compromisso de disseminar as unidades de medida do Sistema Internacional de Unidades (SI) com a requerida confiabilidade metrológica para os usuários de seus serviços, assim como evidenciar competência tecnica, atraves da compatibilidade de resultados em comparações com seus congêneres, visando ao Acordo de Reconhecimento Mútuo, cujo termo em inglês é Mutual Recognition Arrangement (MRA), coordenado pelo Bureau Intemational des Poids et Mesures (BIPM). Como laboratório de referência no País na área de metrologia dimensional, o Laboratório de Metrologia Dimensional (LAMIN) tem este compromisso. Tendo em vista dificuldades encontradas para o atendimento pleno e efetivo a alguns requisitos técnicos da norma NBR ISO/IEC 17025 (em especial o 5.9), que trata da Garantia da Qualidade de Resultados de Ensaio e Calibração , e pela dificuldade em se obter informações referentes a isto junto a outros INM, houve a motivação para o desenvolvimento de uma metodologia genérica que, de forma criteriosa, permitisse analisar os processos de medição do LAMIN e verificar se os mesmos apresentam a confiabilidade e a exatidão necessária para o desempenho das atividades de calibração. Para o desenvolvimento da mesma teve-se, principalmente, como base os requisitos técnicos da mencionada norma e relevantes conceitos abordados na norma ISO/TS 14253-2. Com o objetivo de se testar tal metodologia, fez-se uma análise do processo de calibração de um gerador de pequenos deslocamentos verticais, elemento principal, que compõe juntamente com uma régua de seno, um gerador de pequenos ângulos. Este último é o padrão de referência do LAMIN para a disseminação das unidades de medida da grandeza Angulo Plano e que dá rastreabilidade a vários outros processos de medição, razão pela qual optou-se por sua escolha para o estudo.Programa de Pós-graduação em Sistemas de GestãoSegurança do Trabalho, Meio-ambiente, Gestão pela Qualidade TotalSantos, João Alberto Neves dosCPF:49908880715Oliveira, Jose Carlos Valente de2021-03-10T20:52:27Z2008-10-032021-03-10T20:52:27Z2004-01-09info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfhttps://app.uff.br/riuff/handle/1/21277porCC-BY-SAinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da Universidade Federal Fluminense (RIUFF)instname:Universidade Federal Fluminense (UFF)instacron:UFF2021-03-10T20:52:27Zoai:app.uff.br:1/21277Repositório InstitucionalPUBhttps://app.uff.br/oai/requestriuff@id.uff.bropendoar:21202021-03-10T20:52:27Repositório Institucional da Universidade Federal Fluminense (RIUFF) - Universidade Federal Fluminense (UFF)false |
dc.title.none.fl_str_mv |
Garantia contínua e sistêmica da qualidade nas calibrações realizadas pelo laboratório de metrologia dimensional do inmetro: uma proposta de metodologia de implantação |
title |
Garantia contínua e sistêmica da qualidade nas calibrações realizadas pelo laboratório de metrologia dimensional do inmetro: uma proposta de metodologia de implantação |
spellingShingle |
Garantia contínua e sistêmica da qualidade nas calibrações realizadas pelo laboratório de metrologia dimensional do inmetro: uma proposta de metodologia de implantação Oliveira, Jose Carlos Valente de Confiabilidade Metrológica Exatidão Compatibilidade e Qualidade de Resultados Metro!ogical Confidence Accuracy Compatibility and Quality of Results CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
title_short |
Garantia contínua e sistêmica da qualidade nas calibrações realizadas pelo laboratório de metrologia dimensional do inmetro: uma proposta de metodologia de implantação |
title_full |
Garantia contínua e sistêmica da qualidade nas calibrações realizadas pelo laboratório de metrologia dimensional do inmetro: uma proposta de metodologia de implantação |
title_fullStr |
Garantia contínua e sistêmica da qualidade nas calibrações realizadas pelo laboratório de metrologia dimensional do inmetro: uma proposta de metodologia de implantação |
title_full_unstemmed |
Garantia contínua e sistêmica da qualidade nas calibrações realizadas pelo laboratório de metrologia dimensional do inmetro: uma proposta de metodologia de implantação |
title_sort |
Garantia contínua e sistêmica da qualidade nas calibrações realizadas pelo laboratório de metrologia dimensional do inmetro: uma proposta de metodologia de implantação |
author |
Oliveira, Jose Carlos Valente de |
author_facet |
Oliveira, Jose Carlos Valente de |
author_role |
author |
dc.contributor.none.fl_str_mv |
Santos, João Alberto Neves dos CPF:49908880715 |
dc.contributor.author.fl_str_mv |
Oliveira, Jose Carlos Valente de |
dc.subject.por.fl_str_mv |
Confiabilidade Metrológica Exatidão Compatibilidade e Qualidade de Resultados Metro!ogical Confidence Accuracy Compatibility and Quality of Results CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
topic |
Confiabilidade Metrológica Exatidão Compatibilidade e Qualidade de Resultados Metro!ogical Confidence Accuracy Compatibility and Quality of Results CNPQ::ENGENHARIAS::ENGENHARIA DE PRODUCAO |
description |
The National Metrology Institutes (NMI) have the commitment to disseminate the units of the International System of Units (SI) with the required metrological confidence to their services users, as we!! as to evidence technica! competence, through the compatibility of results with their c.ongeners, aiming the Mutual Recognition Arrangement (MRA) coordinated by the Bureau Intemational des Poids et Mesures (BIPM). As the reference Iaboratory in the dimensional metrology area in the country, the Dimensiona! Metro!ogy Laboratory (LAMIN) has this commitment. Due to the difficu!ty to attend abso!ute and effectively some technica! requirements of the ISO/IEC 17025 standard (in special the 5.9), that talks about the Assuring the Quality of Test and Calibration Results , and by the difficulty to obtain information about this subject with other NMI, arose the motivation for the deve!opment of a generic methodology that cou!d a!!ow LAMIN s measurement processes ana!ysis and verify if they present the necessary confidence and accuracy to the ca!ibration activities performance. The technical requirements of the mentioned standard and relevant concepts contained in the ISO/TS 14253-2 standard were taken into consideration for the methodology development. It was made a ca!ibration process analysis of a vertical sma!l displacements generator, main element, that together with a sine bar compose a small ang!es generator. This one is LAMIN s reference standard to the dissemination of the measurement units of the Plane Angle quantity and which gives traceability to several angle measurement processes, reason why this process was chosen to be studied. |
publishDate |
2004 |
dc.date.none.fl_str_mv |
2004-01-09 2008-10-03 2021-03-10T20:52:27Z 2021-03-10T20:52:27Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://app.uff.br/riuff/handle/1/21277 |
url |
https://app.uff.br/riuff/handle/1/21277 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
CC-BY-SA info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
CC-BY-SA |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Programa de Pós-graduação em Sistemas de Gestão Segurança do Trabalho, Meio-ambiente, Gestão pela Qualidade Total |
publisher.none.fl_str_mv |
Programa de Pós-graduação em Sistemas de Gestão Segurança do Trabalho, Meio-ambiente, Gestão pela Qualidade Total |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da Universidade Federal Fluminense (RIUFF) instname:Universidade Federal Fluminense (UFF) instacron:UFF |
instname_str |
Universidade Federal Fluminense (UFF) |
instacron_str |
UFF |
institution |
UFF |
reponame_str |
Repositório Institucional da Universidade Federal Fluminense (RIUFF) |
collection |
Repositório Institucional da Universidade Federal Fluminense (RIUFF) |
repository.name.fl_str_mv |
Repositório Institucional da Universidade Federal Fluminense (RIUFF) - Universidade Federal Fluminense (UFF) |
repository.mail.fl_str_mv |
riuff@id.uff.br |
_version_ |
1797044723853033472 |