Desempenho biomecânico de novos retentores intrarradiculares em dentes com ou sem férula
Autor(a) principal: | |
---|---|
Data de Publicação: | 2020 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFG |
Texto Completo: | http://repositorio.bc.ufg.br/tede/handle/tede/12470 |
Resumo: | The aim of this study was to evaluate the influence of intrarradicular post system and the amount of coronary remnant (ferrule) on maximal fracture load, fracture pattern and stress distribution of endodontically treated teeth. Eight experimental groups were created: Pf-0 e Pf-2 - glass fiber post (GFP) no. 3 in teeth with and without ferrule respectively; GFP no. 1 relined with experimental composite (EC) with and without ferrule respectively; EC-0 and EC-2 - custom post made with the experimental composite (EC) with and without ferrule respectively, CAD-0 e CAD-2 - custom milled post with and without ferrule respectively. The EC was composed of 22.5 wt% of methacrylate resin (Bis-GMA, TEGDMA, Bis-EMA), 30% of glass fibers and 47.5% of filler particles. After endodontic treatment, post cementation and crowns with composite resin, the teeth were tested to verify the maximum fracture load (n = 10) in a universal testing machine (Instron 5965) a 0.5 mm/min. Subsequently, the fracture pattern was analyzed and stress distribution was evaluated by the finite element method using the modified von Mises criterion (MSC Marc & Mentat). The maximum fracture load results were subjected to factor analysis, and subsequently Kolmogorov-Smirnov, ANOVA, Tukey and T-Test for comparison between groups (α = 0.05). Interaction was observed between the factors under study (p = 0.046), and ANOVA and Tukey showed a statistically significant difference between the groups (p = 0.001). EC-0 (752.81N) and CAD-0 (728.84N) were similar and superior Pr-0 (545.16) and Pf-0 (498.01N). In ferrule groups, all retainers were similar (p>0.05) Pf-2 (791.85), Pr-2 (699.1), EC-2 (822,81), CAD-2 (779.89). Pf-0 showed a greater number of non-repairable failures and the Pr-2 posts promoted a greater number of favorable failures. Groups without ferrule showed higher number of non-repairable failures. The posts made with EC showed lower stress concentration and the posts made by CAD / CAM technique, the highest stress concentration. Retainer type and presence of ferrule influence on maximal load, fracture pattern and stress distribution of endodontically treated teeth. CE custom posts promote higher maximum fracture load and more favorable stress distribution. |
id |
UFG-2_e999bf598da40730ad2146de191c1da8 |
---|---|
oai_identifier_str |
oai:repositorio.bc.ufg.br:tede/12470 |
network_acronym_str |
UFG-2 |
network_name_str |
Repositório Institucional da UFG |
repository_id_str |
|
spelling |
Fonseca, Rodrigo Borgeshttp://lattes.cnpq.br/8629552867290605Fonseca, Rodrigo BorgesLopes, Lawrence GonzagaBarata, Terezinha de Jesus EstevesKasuya, Amanda Vessoni BarbosaFavarão, Isabella Negrohttp://lattes.cnpq.br/9158639174200672Almeida, Letícia Nunes de2022-12-13T13:53:58Z2022-12-13T13:53:58Z2020-02-28ALMEIDA, L. N. Desempenho biomecânico de novos retentores intrarradiculares em dentes com ou sem férula. 2020. 92 f. Tese (Doutorado em Odontologia) - Universidade Federal de Goiás, Goiânia, 2020.http://repositorio.bc.ufg.br/tede/handle/tede/12470ark:/38995/0013000008xn2The aim of this study was to evaluate the influence of intrarradicular post system and the amount of coronary remnant (ferrule) on maximal fracture load, fracture pattern and stress distribution of endodontically treated teeth. Eight experimental groups were created: Pf-0 e Pf-2 - glass fiber post (GFP) no. 3 in teeth with and without ferrule respectively; GFP no. 1 relined with experimental composite (EC) with and without ferrule respectively; EC-0 and EC-2 - custom post made with the experimental composite (EC) with and without ferrule respectively, CAD-0 e CAD-2 - custom milled post with and without ferrule respectively. The EC was composed of 22.5 wt% of methacrylate resin (Bis-GMA, TEGDMA, Bis-EMA), 30% of glass fibers and 47.5% of filler particles. After endodontic treatment, post cementation and crowns with composite resin, the teeth were tested to verify the maximum fracture load (n = 10) in a universal testing machine (Instron 5965) a 0.5 mm/min. Subsequently, the fracture pattern was analyzed and stress distribution was evaluated by the finite element method using the modified von Mises criterion (MSC Marc & Mentat). The maximum fracture load results were subjected to factor analysis, and subsequently Kolmogorov-Smirnov, ANOVA, Tukey and T-Test for comparison between groups (α = 0.05). Interaction was observed between the factors under study (p = 0.046), and ANOVA and Tukey showed a statistically significant difference between the groups (p = 0.001). EC-0 (752.81N) and CAD-0 (728.84N) were similar and superior Pr-0 (545.16) and Pf-0 (498.01N). In ferrule groups, all retainers were similar (p>0.05) Pf-2 (791.85), Pr-2 (699.1), EC-2 (822,81), CAD-2 (779.89). Pf-0 showed a greater number of non-repairable failures and the Pr-2 posts promoted a greater number of favorable failures. Groups without ferrule showed higher number of non-repairable failures. The posts made with EC showed lower stress concentration and the posts made by CAD / CAM technique, the highest stress concentration. Retainer type and presence of ferrule influence on maximal load, fracture pattern and stress distribution of endodontically treated teeth. CE custom posts promote higher maximum fracture load and more favorable stress distribution.O objetivo deste trabalho foi avaliar a influência do tipo do retentor intrarradicular e da quantidade de remanescente coronário (férula) na carga máxima à fratura, padrão de fratura e distribuição de tensões de dentes tratados endodonticamente. Oito grupos experimentais foram criados, Pf-0 e Pf-2 - pino de fibra de vidro (PFV) n°3 em dentes sem férula e com férula, respectivamente; Pr-0 e Pr-2 - PFV n°1 reembasado com compósito experimental (CE) em dentes sem férula e com férula, respectivamente; PE-0 e PE-2 - pino personalizado confeccionado com o CE em dentes sem férula e com férula, respectivamente; CAD-0 e CAD-2 - pino personalizado fresado (CAD/CAM)) em dentes sem férula e com férula, respectivamente. O CE foi composto por 22,5% de resina de metacrilato (Bis-GMA, TEGDMA, Bis-EMA), 30% de fibras de vidro e 47,5% de partículas de carga. Após tratamento endodôntico, cimentação dos pinos e confecção das coroas com resina composta, os dentes foram submetidos a teste para verificar a carga máxima à fratura (n=10) em máquina de ensaios universais (Instron 5965), a 0,5mm/min. Posteriormente, foi analisado o padrão de fratura e a distribuição de tensões foi avaliada através do método de elementos finitos por meio do critério von Misses modificado (MSC Marc&Mentat). Os resultados de carga máxima à fratura foram submetidos a análise fatorial, e posteriormente Kolmogorov-Smirnov, ANOVA, Tukey e Teste T para comparação entre os grupos (α=0,05). Foi observada interação entre os fatores em estudo (p=0,046), e ANOVA e Tukey mostraram diferença estatística significante entre os grupos (p=0,001). CE-0 (752,81N) e CAD-0 (728,84N) foram semelhantes e superiores a Prf-0 (545,16) e Pr-0 (498,01N). Nos grupos com férula, todos os retentores foram semelhantes (p>0,05) Pf-2 (791,85), Pr-2 (699,1), PE-2 (822,81), CAD-2 (779,89). Nas comparações pareadas, os PFV justapostos e os reembasados mostraram diferença entre os grupos com férula e sem férula. Pr-0 e CAD-0 apresentaram maior quantidade de falhas não reparáveis e Pr-2 e PE-2 promoveram maior quantidade de falhas reparáveis. Grupos sem férula apresentaram maior quantidade de falhas não reparáveis. Pe-0 e PE-2 mostraram menor concentração de tensões e CAD-0 e CAD-2, a maior concentração de tensões. O tipo do retentor e a presença de férula influenciam na carga à fratura, padrão de fratura e distribuição de tensões de dentes tratados endodonticamente. Retentores personalizados confeccionados com CE promovem maior carga máxima à fratura e distribuição de tensões mais favorável.Submitted by Marlene Santos (marlene.bc.ufg@gmail.com) on 2022-12-07T21:28:24Z No. of bitstreams: 2 Tese - Letícia Nunes de Almeida - 2020.pdf: 42269399 bytes, checksum: 97a214ce2a343bc2fa8f7e96ad0aba4b (MD5) license_rdf: 805 bytes, checksum: 4460e5956bc1d1639be9ae6146a50347 (MD5)Approved for entry into archive by Luciana Ferreira (lucgeral@gmail.com) on 2022-12-13T13:53:58Z (GMT) No. of bitstreams: 2 Tese - Letícia Nunes de Almeida - 2020.pdf: 42269399 bytes, checksum: 97a214ce2a343bc2fa8f7e96ad0aba4b (MD5) license_rdf: 805 bytes, checksum: 4460e5956bc1d1639be9ae6146a50347 (MD5)Made available in DSpace on 2022-12-13T13:53:58Z (GMT). No. of bitstreams: 2 Tese - Letícia Nunes de Almeida - 2020.pdf: 42269399 bytes, checksum: 97a214ce2a343bc2fa8f7e96ad0aba4b (MD5) license_rdf: 805 bytes, checksum: 4460e5956bc1d1639be9ae6146a50347 (MD5) Previous issue date: 2020-02-28Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPESporUniversidade Federal de GoiásPrograma de Pós-graduação em Odontologia (FO)UFGBrasilFaculdade de Odontologia - FO (RG)Attribution-NonCommercial-NoDerivatives 4.0 Internationalhttp://creativecommons.org/licenses/by-nc-nd/4.0/info:eu-repo/semantics/openAccessRetentores intrarradicularesCompósito reforçado por fibraPino de fibra de vidroFérulaIntraradicular retainersFiber-reinforced compositeGlass fiber postFerruleCIENCIAS DA SAUDE::ODONTOLOGIA::CLINICA ODONTOLOGICADesempenho biomecânico de novos retentores intrarradiculares em dentes com ou sem férulaBiomechanical behavior of novel intaradicular retainers in teeth with or without ferruleinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesis79500500500500219131reponame:Repositório Institucional da UFGinstname:Universidade Federal de Goiás (UFG)instacron:UFGLICENSElicense.txtlicense.txttext/plain; charset=utf-81748http://repositorio.bc.ufg.br/tede/bitstreams/dbeb3b44-3449-40dd-b928-45ac50eca73c/download8a4605be74aa9ea9d79846c1fba20a33MD51CC-LICENSElicense_rdflicense_rdfapplication/rdf+xml; charset=utf-8805http://repositorio.bc.ufg.br/tede/bitstreams/784f1ebb-dcc2-480b-a2b0-37642496215b/download4460e5956bc1d1639be9ae6146a50347MD52ORIGINALTese - Letícia Nunes de Almeida - 2020.pdfTese - Letícia Nunes de Almeida - 2020.pdfapplication/pdf42269399http://repositorio.bc.ufg.br/tede/bitstreams/890eeef6-e79b-4665-88c1-8f0a9ff744d3/download97a214ce2a343bc2fa8f7e96ad0aba4bMD53tede/124702022-12-13 10:53:58.713http://creativecommons.org/licenses/by-nc-nd/4.0/Attribution-NonCommercial-NoDerivatives 4.0 Internationalopen.accessoai:repositorio.bc.ufg.br:tede/12470http://repositorio.bc.ufg.br/tedeRepositório InstitucionalPUBhttp://repositorio.bc.ufg.br/oai/requesttasesdissertacoes.bc@ufg.bropendoar:2022-12-13T13:53:58Repositório Institucional da UFG - Universidade Federal de Goiás (UFG)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 |
dc.title.pt_BR.fl_str_mv |
Desempenho biomecânico de novos retentores intrarradiculares em dentes com ou sem férula |
dc.title.alternative.eng.fl_str_mv |
Biomechanical behavior of novel intaradicular retainers in teeth with or without ferrule |
title |
Desempenho biomecânico de novos retentores intrarradiculares em dentes com ou sem férula |
spellingShingle |
Desempenho biomecânico de novos retentores intrarradiculares em dentes com ou sem férula Almeida, Letícia Nunes de Retentores intrarradiculares Compósito reforçado por fibra Pino de fibra de vidro Férula Intraradicular retainers Fiber-reinforced composite Glass fiber post Ferrule CIENCIAS DA SAUDE::ODONTOLOGIA::CLINICA ODONTOLOGICA |
title_short |
Desempenho biomecânico de novos retentores intrarradiculares em dentes com ou sem férula |
title_full |
Desempenho biomecânico de novos retentores intrarradiculares em dentes com ou sem férula |
title_fullStr |
Desempenho biomecânico de novos retentores intrarradiculares em dentes com ou sem férula |
title_full_unstemmed |
Desempenho biomecânico de novos retentores intrarradiculares em dentes com ou sem férula |
title_sort |
Desempenho biomecânico de novos retentores intrarradiculares em dentes com ou sem férula |
author |
Almeida, Letícia Nunes de |
author_facet |
Almeida, Letícia Nunes de |
author_role |
author |
dc.contributor.advisor1.fl_str_mv |
Fonseca, Rodrigo Borges |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/8629552867290605 |
dc.contributor.referee1.fl_str_mv |
Fonseca, Rodrigo Borges |
dc.contributor.referee2.fl_str_mv |
Lopes, Lawrence Gonzaga |
dc.contributor.referee3.fl_str_mv |
Barata, Terezinha de Jesus Esteves |
dc.contributor.referee4.fl_str_mv |
Kasuya, Amanda Vessoni Barbosa |
dc.contributor.referee5.fl_str_mv |
Favarão, Isabella Negro |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/9158639174200672 |
dc.contributor.author.fl_str_mv |
Almeida, Letícia Nunes de |
contributor_str_mv |
Fonseca, Rodrigo Borges Fonseca, Rodrigo Borges Lopes, Lawrence Gonzaga Barata, Terezinha de Jesus Esteves Kasuya, Amanda Vessoni Barbosa Favarão, Isabella Negro |
dc.subject.por.fl_str_mv |
Retentores intrarradiculares Compósito reforçado por fibra Pino de fibra de vidro Férula |
topic |
Retentores intrarradiculares Compósito reforçado por fibra Pino de fibra de vidro Férula Intraradicular retainers Fiber-reinforced composite Glass fiber post Ferrule CIENCIAS DA SAUDE::ODONTOLOGIA::CLINICA ODONTOLOGICA |
dc.subject.eng.fl_str_mv |
Intraradicular retainers Fiber-reinforced composite Glass fiber post Ferrule |
dc.subject.cnpq.fl_str_mv |
CIENCIAS DA SAUDE::ODONTOLOGIA::CLINICA ODONTOLOGICA |
description |
The aim of this study was to evaluate the influence of intrarradicular post system and the amount of coronary remnant (ferrule) on maximal fracture load, fracture pattern and stress distribution of endodontically treated teeth. Eight experimental groups were created: Pf-0 e Pf-2 - glass fiber post (GFP) no. 3 in teeth with and without ferrule respectively; GFP no. 1 relined with experimental composite (EC) with and without ferrule respectively; EC-0 and EC-2 - custom post made with the experimental composite (EC) with and without ferrule respectively, CAD-0 e CAD-2 - custom milled post with and without ferrule respectively. The EC was composed of 22.5 wt% of methacrylate resin (Bis-GMA, TEGDMA, Bis-EMA), 30% of glass fibers and 47.5% of filler particles. After endodontic treatment, post cementation and crowns with composite resin, the teeth were tested to verify the maximum fracture load (n = 10) in a universal testing machine (Instron 5965) a 0.5 mm/min. Subsequently, the fracture pattern was analyzed and stress distribution was evaluated by the finite element method using the modified von Mises criterion (MSC Marc & Mentat). The maximum fracture load results were subjected to factor analysis, and subsequently Kolmogorov-Smirnov, ANOVA, Tukey and T-Test for comparison between groups (α = 0.05). Interaction was observed between the factors under study (p = 0.046), and ANOVA and Tukey showed a statistically significant difference between the groups (p = 0.001). EC-0 (752.81N) and CAD-0 (728.84N) were similar and superior Pr-0 (545.16) and Pf-0 (498.01N). In ferrule groups, all retainers were similar (p>0.05) Pf-2 (791.85), Pr-2 (699.1), EC-2 (822,81), CAD-2 (779.89). Pf-0 showed a greater number of non-repairable failures and the Pr-2 posts promoted a greater number of favorable failures. Groups without ferrule showed higher number of non-repairable failures. The posts made with EC showed lower stress concentration and the posts made by CAD / CAM technique, the highest stress concentration. Retainer type and presence of ferrule influence on maximal load, fracture pattern and stress distribution of endodontically treated teeth. CE custom posts promote higher maximum fracture load and more favorable stress distribution. |
publishDate |
2020 |
dc.date.issued.fl_str_mv |
2020-02-28 |
dc.date.accessioned.fl_str_mv |
2022-12-13T13:53:58Z |
dc.date.available.fl_str_mv |
2022-12-13T13:53:58Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
ALMEIDA, L. N. Desempenho biomecânico de novos retentores intrarradiculares em dentes com ou sem férula. 2020. 92 f. Tese (Doutorado em Odontologia) - Universidade Federal de Goiás, Goiânia, 2020. |
dc.identifier.uri.fl_str_mv |
http://repositorio.bc.ufg.br/tede/handle/tede/12470 |
dc.identifier.dark.fl_str_mv |
ark:/38995/0013000008xn2 |
identifier_str_mv |
ALMEIDA, L. N. Desempenho biomecânico de novos retentores intrarradiculares em dentes com ou sem férula. 2020. 92 f. Tese (Doutorado em Odontologia) - Universidade Federal de Goiás, Goiânia, 2020. ark:/38995/0013000008xn2 |
url |
http://repositorio.bc.ufg.br/tede/handle/tede/12470 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.program.fl_str_mv |
79 |
dc.relation.confidence.fl_str_mv |
500 500 500 500 |
dc.relation.department.fl_str_mv |
21 |
dc.relation.cnpq.fl_str_mv |
913 |
dc.relation.sponsorship.fl_str_mv |
1 |
dc.rights.driver.fl_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Attribution-NonCommercial-NoDerivatives 4.0 International http://creativecommons.org/licenses/by-nc-nd/4.0/ |
eu_rights_str_mv |
openAccess |
dc.publisher.none.fl_str_mv |
Universidade Federal de Goiás |
dc.publisher.program.fl_str_mv |
Programa de Pós-graduação em Odontologia (FO) |
dc.publisher.initials.fl_str_mv |
UFG |
dc.publisher.country.fl_str_mv |
Brasil |
dc.publisher.department.fl_str_mv |
Faculdade de Odontologia - FO (RG) |
publisher.none.fl_str_mv |
Universidade Federal de Goiás |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFG instname:Universidade Federal de Goiás (UFG) instacron:UFG |
instname_str |
Universidade Federal de Goiás (UFG) |
instacron_str |
UFG |
institution |
UFG |
reponame_str |
Repositório Institucional da UFG |
collection |
Repositório Institucional da UFG |
bitstream.url.fl_str_mv |
http://repositorio.bc.ufg.br/tede/bitstreams/dbeb3b44-3449-40dd-b928-45ac50eca73c/download http://repositorio.bc.ufg.br/tede/bitstreams/784f1ebb-dcc2-480b-a2b0-37642496215b/download http://repositorio.bc.ufg.br/tede/bitstreams/890eeef6-e79b-4665-88c1-8f0a9ff744d3/download |
bitstream.checksum.fl_str_mv |
8a4605be74aa9ea9d79846c1fba20a33 4460e5956bc1d1639be9ae6146a50347 97a214ce2a343bc2fa8f7e96ad0aba4b |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFG - Universidade Federal de Goiás (UFG) |
repository.mail.fl_str_mv |
tasesdissertacoes.bc@ufg.br |
_version_ |
1811721458726993920 |