DOUBLE-RING AND TENSION INFILTROMETER MEASUREMENTS OF HYDRAULIC CONDUCTIVITY AND MOBILE SOIL REGIONS

• Autor(a) principal: Köhne, John M.
• Data de Publicação: 2011
• Outros Autores: Alves Júnior, José, Köhne, Sigrid, Tiemeyer, Bärbel, Lennartz, Bernd, Kruse, Jens
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Pesquisa Agropecuária Tropical (Online)
• Texto Completo: https://revistas.ufg.br/pat/article/view/11376
• topic: Preferential flow; solute transport; dye tracer; mobile region.; Fluxo preferencial; transporte de soluto; corante de solo; zona de mobilidade.

There are several field methods and techniques for measuring Ks. In this study, double-ring (DI) and tension infiltrometer (TI) infiltration techniques were combined with dye tracer application and compared for estimating Ks and the mobile soil fraction on a structured sandy loam soil (Gleyic Luvisol), in Rostock, Germany. Water was infiltrated into soil by using three methods: DI, TI (without contact with sand), and TIsand (with contact with sand), until steady-state conditions were obtained. At different positions, three pulse depths of 25 mm, 50 mm, and 100 mm, with a 2 g L-1 Brilliant Blue (BB) FCF dye solution, were used. The results showed variable Ks values for DI of 820-2,020 cm d-1, which were 7 to 13 times higher, when compared to TI values, and 12 to 33 times higher than for TIsand. For the 25 mm and 50 mm BB applications, the mobile (dye-stained) soil regions constituted up to 60% in the top 25 cm and varied little, when considered the infiltration methods. Only the 100 mm application, using the DI, yielded significant BB displacement into the subsoil. Hence, both Ks values and their corresponding dye pattern depended on the boundary conditions. For DI, more than 90% of the dye was constrained below the infiltration area, revealing that flow was essentially vertical.