GROWTH AND ARCHITECTURE OF ROOT SYSTEMS OF PLANTS OF Eucalyptus camaldulensis, E. GRANDIS AND E. PELLITA WERE EVALUATED AFTER THE PLANTING

Detalhes bibliográficos
Autor(a) principal: Leles, Paulo Sérgio dos Santos
Data de Publicação: 2015
Outros Autores: Carneiro, José Geraldo de Araujo, Novaes, Adalberto Brito de, Barroso, Deborah Guerra
Tipo de documento: Artigo
Idioma: por
Título da fonte: Cerne (Online)
Texto Completo: https://cerne.ufla.br/site/index.php/CERNE/article/view/362
Resumo: The seedlings were produced according to two methodologies: pressed blocks and stiff plastic tubes. A mixture of decomposed sugar-cane bagasse (60%) and industrial sugar-cane plant residues (40%) were used as substrate. The blocks were made by pressing the humid substrate in metallic moulds with the dimensions of 60 x 40 x 20 cm (lenght, width and height) and pressure of 10 kgf/cm2 for 15 minutes. Under this load the blocks height was reduced to 10 cm. They were placed in wooden boxes with screen bottom. The stiff plastic tubes had circular section 12 cm high, with volume capacity of 50 cm3. The seeds were sown in the blocks 5 cm apart, by means of a spatula. At the end of nursey phase, the seedlings were planted the field. After 2, 6 and 10 months of planting, the height and the diameter at the ground level were evaluated. At the age of 10 months it was also evaluated the number of laterals root and deformatiom cofficient the three plants for treatment. Two months after planting, the plants originated from the pressed blocks showed growth highly signifficant in relation to those of the stiff plastic tubes. At 10 months, of age only Eucalyptus grandis seedlings showed significant difference concerning to height and diameter at the ground level between plants produced by pressed blocks and stiff plastic tubes. For the three species, the pressed blocks seedling showed higher number of lateral roots and smaller number of root deformation coefficents in comparision to the plants from the stiff tubes.
id UFLA-3_4b6fbe9c19d973c95e8611dbcb845178
oai_identifier_str oai:cerne.ufla.br:article/362
network_acronym_str UFLA-3
network_name_str Cerne (Online)
repository_id_str
spelling GROWTH AND ARCHITECTURE OF ROOT SYSTEMS OF PLANTS OF Eucalyptus camaldulensis, E. GRANDIS AND E. PELLITA WERE EVALUATED AFTER THE PLANTINGQuality of seedlingscontainersroot architecturepressed blocksThe seedlings were produced according to two methodologies: pressed blocks and stiff plastic tubes. A mixture of decomposed sugar-cane bagasse (60%) and industrial sugar-cane plant residues (40%) were used as substrate. The blocks were made by pressing the humid substrate in metallic moulds with the dimensions of 60 x 40 x 20 cm (lenght, width and height) and pressure of 10 kgf/cm2 for 15 minutes. Under this load the blocks height was reduced to 10 cm. They were placed in wooden boxes with screen bottom. The stiff plastic tubes had circular section 12 cm high, with volume capacity of 50 cm3. The seeds were sown in the blocks 5 cm apart, by means of a spatula. At the end of nursey phase, the seedlings were planted the field. After 2, 6 and 10 months of planting, the height and the diameter at the ground level were evaluated. At the age of 10 months it was also evaluated the number of laterals root and deformatiom cofficient the three plants for treatment. Two months after planting, the plants originated from the pressed blocks showed growth highly signifficant in relation to those of the stiff plastic tubes. At 10 months, of age only Eucalyptus grandis seedlings showed significant difference concerning to height and diameter at the ground level between plants produced by pressed blocks and stiff plastic tubes. For the three species, the pressed blocks seedling showed higher number of lateral roots and smaller number of root deformation coefficents in comparision to the plants from the stiff tubes.CERNECERNE2015-09-15info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://cerne.ufla.br/site/index.php/CERNE/article/view/362CERNE; Vol. 7 No. 1 (2001); 010-019CERNE; v. 7 n. 1 (2001); 010-0192317-63420104-7760reponame:Cerne (Online)instname:Universidade Federal de Lavras (UFLA)instacron:UFLAporhttps://cerne.ufla.br/site/index.php/CERNE/article/view/362/305Copyright (c) 2015 CERNEinfo:eu-repo/semantics/openAccessLeles, Paulo Sérgio dos SantosCarneiro, José Geraldo de AraujoNovaes, Adalberto Brito deBarroso, Deborah Guerra2015-10-22T09:05:00Zoai:cerne.ufla.br:article/362Revistahttps://cerne.ufla.br/site/index.php/CERNEPUBhttps://cerne.ufla.br/site/index.php/CERNE/oaicerne@dcf.ufla.br||cerne@dcf.ufla.br2317-63420104-7760opendoar:2024-05-21T19:53:46.268558Cerne (Online) - Universidade Federal de Lavras (UFLA)true
dc.title.none.fl_str_mv GROWTH AND ARCHITECTURE OF ROOT SYSTEMS OF PLANTS OF Eucalyptus camaldulensis, E. GRANDIS AND E. PELLITA WERE EVALUATED AFTER THE PLANTING
title GROWTH AND ARCHITECTURE OF ROOT SYSTEMS OF PLANTS OF Eucalyptus camaldulensis, E. GRANDIS AND E. PELLITA WERE EVALUATED AFTER THE PLANTING
spellingShingle GROWTH AND ARCHITECTURE OF ROOT SYSTEMS OF PLANTS OF Eucalyptus camaldulensis, E. GRANDIS AND E. PELLITA WERE EVALUATED AFTER THE PLANTING
Leles, Paulo Sérgio dos Santos
Quality of seedlings
containers
root architecture
pressed blocks
title_short GROWTH AND ARCHITECTURE OF ROOT SYSTEMS OF PLANTS OF Eucalyptus camaldulensis, E. GRANDIS AND E. PELLITA WERE EVALUATED AFTER THE PLANTING
title_full GROWTH AND ARCHITECTURE OF ROOT SYSTEMS OF PLANTS OF Eucalyptus camaldulensis, E. GRANDIS AND E. PELLITA WERE EVALUATED AFTER THE PLANTING
title_fullStr GROWTH AND ARCHITECTURE OF ROOT SYSTEMS OF PLANTS OF Eucalyptus camaldulensis, E. GRANDIS AND E. PELLITA WERE EVALUATED AFTER THE PLANTING
title_full_unstemmed GROWTH AND ARCHITECTURE OF ROOT SYSTEMS OF PLANTS OF Eucalyptus camaldulensis, E. GRANDIS AND E. PELLITA WERE EVALUATED AFTER THE PLANTING
title_sort GROWTH AND ARCHITECTURE OF ROOT SYSTEMS OF PLANTS OF Eucalyptus camaldulensis, E. GRANDIS AND E. PELLITA WERE EVALUATED AFTER THE PLANTING
author Leles, Paulo Sérgio dos Santos
author_facet Leles, Paulo Sérgio dos Santos
Carneiro, José Geraldo de Araujo
Novaes, Adalberto Brito de
Barroso, Deborah Guerra
author_role author
author2 Carneiro, José Geraldo de Araujo
Novaes, Adalberto Brito de
Barroso, Deborah Guerra
author2_role author
author
author
dc.contributor.author.fl_str_mv Leles, Paulo Sérgio dos Santos
Carneiro, José Geraldo de Araujo
Novaes, Adalberto Brito de
Barroso, Deborah Guerra
dc.subject.por.fl_str_mv Quality of seedlings
containers
root architecture
pressed blocks
topic Quality of seedlings
containers
root architecture
pressed blocks
description The seedlings were produced according to two methodologies: pressed blocks and stiff plastic tubes. A mixture of decomposed sugar-cane bagasse (60%) and industrial sugar-cane plant residues (40%) were used as substrate. The blocks were made by pressing the humid substrate in metallic moulds with the dimensions of 60 x 40 x 20 cm (lenght, width and height) and pressure of 10 kgf/cm2 for 15 minutes. Under this load the blocks height was reduced to 10 cm. They were placed in wooden boxes with screen bottom. The stiff plastic tubes had circular section 12 cm high, with volume capacity of 50 cm3. The seeds were sown in the blocks 5 cm apart, by means of a spatula. At the end of nursey phase, the seedlings were planted the field. After 2, 6 and 10 months of planting, the height and the diameter at the ground level were evaluated. At the age of 10 months it was also evaluated the number of laterals root and deformatiom cofficient the three plants for treatment. Two months after planting, the plants originated from the pressed blocks showed growth highly signifficant in relation to those of the stiff plastic tubes. At 10 months, of age only Eucalyptus grandis seedlings showed significant difference concerning to height and diameter at the ground level between plants produced by pressed blocks and stiff plastic tubes. For the three species, the pressed blocks seedling showed higher number of lateral roots and smaller number of root deformation coefficents in comparision to the plants from the stiff tubes.
publishDate 2015
dc.date.none.fl_str_mv 2015-09-15
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://cerne.ufla.br/site/index.php/CERNE/article/view/362
url https://cerne.ufla.br/site/index.php/CERNE/article/view/362
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv https://cerne.ufla.br/site/index.php/CERNE/article/view/362/305
dc.rights.driver.fl_str_mv Copyright (c) 2015 CERNE
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Copyright (c) 2015 CERNE
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv CERNE
CERNE
publisher.none.fl_str_mv CERNE
CERNE
dc.source.none.fl_str_mv CERNE; Vol. 7 No. 1 (2001); 010-019
CERNE; v. 7 n. 1 (2001); 010-019
2317-6342
0104-7760
reponame:Cerne (Online)
instname:Universidade Federal de Lavras (UFLA)
instacron:UFLA
instname_str Universidade Federal de Lavras (UFLA)
instacron_str UFLA
institution UFLA
reponame_str Cerne (Online)
collection Cerne (Online)
repository.name.fl_str_mv Cerne (Online) - Universidade Federal de Lavras (UFLA)
repository.mail.fl_str_mv cerne@dcf.ufla.br||cerne@dcf.ufla.br
_version_ 1799874940065808384