EQUILIBRIUM MOISTURE CONTENT OF OSB PANELS PRODUCED WITH VENEER INCLUSION AND DIFFERENT TYPES OF ADHESIVE

• Autor(a) principal: Mendes, Lourival Marin
• Data de Publicação: 2016
• Outros Autores: Mendes, Rafael Farinassi, Protásio, Thiago de Paula, Oliveira, Stefânia Lima, Mesquita, Ricardo Gabriel de Almeida
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Cerne (Online)
• Texto Completo: https://cerne.ufla.br/site/index.php/CERNE/article/view/969
• topic: Equilibrium moisture content; modeling; temperature; relative humidity of air.

The aim of this study was to evaluate different statistical models to estimate the equilibrium moisture content of OSB panels exposed to different conditions of air temperature and relative humidity, And also to evaluate the influence of the adhesive and veneer inclusion in the equilibrium moisture content. The panels were produced with three different adhesive types (phenol-formaldehyde - FF, melamine-urea-formaldehyde - MUF, and phenol-melamine-urea-formaldehyde - PMUF) and with and without veneer inclusion. The evaluation of the equilibrium moisture content of the panels was carried out at temperatures of 30, 40 and 50°C and relative humidity of 40, 50, 60, 70, 80 and 90%. The modeling of equilibrium moisture content was performed using the statistical non-linear and polynomial models. In general, the polynomial models are most indicated for determining the equilibrium moisture content of OSB. The models adjusted only with air relative humidity presented the best precision measurements. The type of adhesive affected the equilibrium moisture content of the panels, being observed for adhesives PMUF and FF the same trend of variation, and the highest values obtained for the panels produced with adhesive MUF. The veneer inclusion decreased the equilibrium moisture content only in the panels with MUF adhesive.