THE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGS

Detalhes bibliográficos
Autor(a) principal: özden, Seray
Data de Publicação: 2020
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Cerne (Online)
Texto Completo: https://cerne.ufla.br/site/index.php/CERNE/article/view/2453
Resumo: The altitude is an important factor to affect growth and development of saplings of tree.  This study, therefore, aimed to evaluate the influence of altitude on the morphological, anatomical and wood density properties of saplings of Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen (Trojan fir). The present study was set up at two different altitude steps: 795 m (a.s.l. low-altitude) and 1350 m (a.s.l. high altitude). The morphological (stem height, diameter, degree of taper, pith proportion, bark proportion and xylem proportion) and anatomical (ray numbers, average ring width, ray height and width, tracheid length and width, tracheid lumen width and tracheid wall thickness) were determined at two altitudes. Wood density were also investigated. The morphological results showed that saplings grown at low-altitude had greater taper degree, pith radius, pith proportion and bark proportion than high-altitude. However, stem height, stem diameter, node number and xylem proportion were found to be higher in saplings grown at high-altitude than low-altitude. The growth of fir saplings increased with altitude. The results of anatomical measurements indicated different patterns in wood cell anatomy between two altitudes such that ring width, ray numbers, tracheid length and tracheid width were higher at low-altitude, whereas ray height, ray width, tracheid lumen width and tracheid wall thickness were greater at high-altitude. Wood density was also found to be higher in saplings grown at high-altitude. It could be suggested that growth and development of fir saplings were better when they were grown at high-altitude than low-altitude.
id UFLA-3_bd2b5a46d0c21f07fd476e72d9f9b1ee
oai_identifier_str oai:cerne.ufla.br:article/2453
network_acronym_str UFLA-3
network_name_str Cerne (Online)
repository_id_str
spelling THE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGSTHE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGSAltitudeSaplingTrojan FirStem MorpholgyTree MorphologyWood AnatomyTree BiomechanicsTree GrowthThe altitude is an important factor to affect growth and development of saplings of tree.  This study, therefore, aimed to evaluate the influence of altitude on the morphological, anatomical and wood density properties of saplings of Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen (Trojan fir). The present study was set up at two different altitude steps: 795 m (a.s.l. low-altitude) and 1350 m (a.s.l. high altitude). The morphological (stem height, diameter, degree of taper, pith proportion, bark proportion and xylem proportion) and anatomical (ray numbers, average ring width, ray height and width, tracheid length and width, tracheid lumen width and tracheid wall thickness) were determined at two altitudes. Wood density were also investigated. The morphological results showed that saplings grown at low-altitude had greater taper degree, pith radius, pith proportion and bark proportion than high-altitude. However, stem height, stem diameter, node number and xylem proportion were found to be higher in saplings grown at high-altitude than low-altitude. The growth of fir saplings increased with altitude. The results of anatomical measurements indicated different patterns in wood cell anatomy between two altitudes such that ring width, ray numbers, tracheid length and tracheid width were higher at low-altitude, whereas ray height, ray width, tracheid lumen width and tracheid wall thickness were greater at high-altitude. Wood density was also found to be higher in saplings grown at high-altitude. It could be suggested that growth and development of fir saplings were better when they were grown at high-altitude than low-altitude.The altitude is an important factor to affect the growth and development of saplings of the tree.  However, the effect of altitude on the growth and properties of wood during their young stage it has been little studied. This study, therefore, aimed to evaluate the influence of two different altitude steps: 795 m (a.s.l. low-altitude) and 1350 m (a.s.l. high altitude)  on  the  morphological,  anatomical  and  wood  density  properties  of  saplings  of  Abies  nordmanniana  subsp.  equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen (Trojan fir). Trojan fir is an endemic species in Turkey and its morphology and anatomy have less studied in the literature. The functional traits and wood density properties differed significantly  between  the  two  altitudes.  The  saplings  grown  at  low-altitude  showed greater taper degree, pith radius, pith proportion, and bark proportion than high-altitude. However, stem height, stem diameter, node number, and xylem proportion were found to be higher in saplings grown at high-altitude than low-altitude. Wood cell anatomy also varied significantly between two altitudes such that ring width, ray numbers, tracheid length,  and  tracheid  width  were  higher  at  low-altitude,  whereas  ray  height,  ray  width,  tracheid lumen width, and tracheid wall thickness were greater at high-altitude. This study, therefore, suggested that the growth and development of fir saplings were better when they were grown at high-altitude than low-altitude.CERNECERNE2020-11-17info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfhttps://cerne.ufla.br/site/index.php/CERNE/article/view/2453CERNE; Vol 26 No 3 (2020); 381-392CERNE; Vol 26 No 3 (2020); 381-3922317-63420104-7760reponame:Cerne (Online)instname:Universidade Federal de Lavras (UFLA)instacron:UFLAenghttps://cerne.ufla.br/site/index.php/CERNE/article/view/2453/1205Copyright (c) 2020 CERNEinfo:eu-repo/semantics/openAccessözden, Seray2021-01-12T03:38:10Zoai:cerne.ufla.br:article/2453Revistahttps://cerne.ufla.br/site/index.php/CERNEPUBhttps://cerne.ufla.br/site/index.php/CERNE/oaicerne@dcf.ufla.br||cerne@dcf.ufla.br2317-63420104-7760opendoar:2024-05-21T19:54:45.248618Cerne (Online) - Universidade Federal de Lavras (UFLA)true
dc.title.none.fl_str_mv THE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGS
THE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGS
title THE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGS
spellingShingle THE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGS
özden, Seray
Altitude
Sapling
Trojan Fir
Stem Morpholgy
Tree Morphology
Wood Anatomy
Tree Biomechanics
Tree Growth
title_short THE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGS
title_full THE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGS
title_fullStr THE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGS
title_full_unstemmed THE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGS
title_sort THE EFFECT OF ALTITUDE ON THE GROWTH AND DEVELOPMENT OF TROJAN FIR (Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen) SAPLINGS
author özden, Seray
author_facet özden, Seray
author_role author
dc.contributor.author.fl_str_mv özden, Seray
dc.subject.por.fl_str_mv Altitude
Sapling
Trojan Fir
Stem Morpholgy
Tree Morphology
Wood Anatomy
Tree Biomechanics
Tree Growth
topic Altitude
Sapling
Trojan Fir
Stem Morpholgy
Tree Morphology
Wood Anatomy
Tree Biomechanics
Tree Growth
description The altitude is an important factor to affect growth and development of saplings of tree.  This study, therefore, aimed to evaluate the influence of altitude on the morphological, anatomical and wood density properties of saplings of Abies nordmanniana subsp. equi-trojani [Asch. & Sint. ex Boiss] Coode & Cullen (Trojan fir). The present study was set up at two different altitude steps: 795 m (a.s.l. low-altitude) and 1350 m (a.s.l. high altitude). The morphological (stem height, diameter, degree of taper, pith proportion, bark proportion and xylem proportion) and anatomical (ray numbers, average ring width, ray height and width, tracheid length and width, tracheid lumen width and tracheid wall thickness) were determined at two altitudes. Wood density were also investigated. The morphological results showed that saplings grown at low-altitude had greater taper degree, pith radius, pith proportion and bark proportion than high-altitude. However, stem height, stem diameter, node number and xylem proportion were found to be higher in saplings grown at high-altitude than low-altitude. The growth of fir saplings increased with altitude. The results of anatomical measurements indicated different patterns in wood cell anatomy between two altitudes such that ring width, ray numbers, tracheid length and tracheid width were higher at low-altitude, whereas ray height, ray width, tracheid lumen width and tracheid wall thickness were greater at high-altitude. Wood density was also found to be higher in saplings grown at high-altitude. It could be suggested that growth and development of fir saplings were better when they were grown at high-altitude than low-altitude.
publishDate 2020
dc.date.none.fl_str_mv 2020-11-17
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://cerne.ufla.br/site/index.php/CERNE/article/view/2453
url https://cerne.ufla.br/site/index.php/CERNE/article/view/2453
dc.language.iso.fl_str_mv eng
language eng
dc.relation.none.fl_str_mv https://cerne.ufla.br/site/index.php/CERNE/article/view/2453/1205
dc.rights.driver.fl_str_mv Copyright (c) 2020 CERNE
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Copyright (c) 2020 CERNE
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv CERNE
CERNE
publisher.none.fl_str_mv CERNE
CERNE
dc.source.none.fl_str_mv CERNE; Vol 26 No 3 (2020); 381-392
CERNE; Vol 26 No 3 (2020); 381-392
2317-6342
0104-7760
reponame:Cerne (Online)
instname:Universidade Federal de Lavras (UFLA)
instacron:UFLA
instname_str Universidade Federal de Lavras (UFLA)
instacron_str UFLA
institution UFLA
reponame_str Cerne (Online)
collection Cerne (Online)
repository.name.fl_str_mv Cerne (Online) - Universidade Federal de Lavras (UFLA)
repository.mail.fl_str_mv cerne@dcf.ufla.br||cerne@dcf.ufla.br
_version_ 1799874944176226304