Desenvolvimento de IHM para técnicas de metrologia óptica por interferência
Autor(a) principal: | |
---|---|
Data de Publicação: | 2020 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFLA |
Texto Completo: | http://repositorio.ufla.br/jspui/handle/1/41486 |
Resumo: | The non-destructive testing applied to the study of deformation, strain, profile, and the structural fault has great importance in obtaining information relative to the structure and material properties, being essential for example in production quality control and industrial maintenance area. Optical metrology techniques by interference such as Moiré and Shearography are widely used to obtain such information, mainly due to its field application capacity, being not intrusive, having good precision, visual quality, and real-time exhibition possibility. To obtain the final results of both techniques, a set of sequential steps is necessary, involving the initial procedures of the adequacy of the patterns obtained to the studied physical information recovery. Such steps may require the use of different programs and procedures, which makes the experience difficult if the results are not adequate or if it is necessary to make any alteration in the experimental physical setup, requiring a long time due to the need for calibrations and repetitions of the procedure steps. The objective of this work is the development of a human-machine interface (HMI) that integrates all the experimental steps of the Moiré and Shearography techniques, with the possibility of configuring the steps and visualizing the results in real and static time, in addition to application in the field with the use of machine vision. The real-time application facilitates possible changes in the steps or experimental arrangement, in addition to making it possible to obtain different patterns with different objectives. The results obtained prove the quality, speed, and easy configuration of the experimental steps through the developed HMI. |
id |
UFLA_252884d6a1aaccae0079580080100c31 |
---|---|
oai_identifier_str |
oai:localhost:1/41486 |
network_acronym_str |
UFLA |
network_name_str |
Repositório Institucional da UFLA |
repository_id_str |
|
spelling |
Desenvolvimento de IHM para técnicas de metrologia óptica por interferênciaMoiréShearografiaMetrologia ópticaInterface homem-máquinaShearographyMachine visionHuman-machine interfaceEngenhariaThe non-destructive testing applied to the study of deformation, strain, profile, and the structural fault has great importance in obtaining information relative to the structure and material properties, being essential for example in production quality control and industrial maintenance area. Optical metrology techniques by interference such as Moiré and Shearography are widely used to obtain such information, mainly due to its field application capacity, being not intrusive, having good precision, visual quality, and real-time exhibition possibility. To obtain the final results of both techniques, a set of sequential steps is necessary, involving the initial procedures of the adequacy of the patterns obtained to the studied physical information recovery. Such steps may require the use of different programs and procedures, which makes the experience difficult if the results are not adequate or if it is necessary to make any alteration in the experimental physical setup, requiring a long time due to the need for calibrations and repetitions of the procedure steps. The objective of this work is the development of a human-machine interface (HMI) that integrates all the experimental steps of the Moiré and Shearography techniques, with the possibility of configuring the steps and visualizing the results in real and static time, in addition to application in the field with the use of machine vision. The real-time application facilitates possible changes in the steps or experimental arrangement, in addition to making it possible to obtain different patterns with different objectives. The results obtained prove the quality, speed, and easy configuration of the experimental steps through the developed HMI.O ensaio não destrutivo aplicado no estudo de deformações, tensões, perfis e falhas estruturais possui grande importância para a obtenção de informações relativas à estrutura e propriedades de materiais, sendo essencial por exemplo no controle de qualidade da produção e na manutenção industrial. Técnicas de metrologia óptica por interferência como moiré e shearografia são amplamente utilizadas para obtenção de tais informações, devido principalmente à capacidade de aplicação em campo, serem não-intrusivas, possuírem boa precisão, qualidade visual, e possibilidade de exibição dos resultados em tempo real. Para obtenção dos resultados finais de ambas as técnicas, um conjunto de etapas sequenciais são necessárias, envolvendo desde os procedimentos iniciais de adequação dos padrões obtidos aos de recuperação da informação física estudada. Tais etapas podem requerer o uso de programas e procedimentos diversos, o que dificulta a prática caso os resultados não sejam adequados ou necessite realizar alterações na configuração física experimental, exigindo um tempo longo devido à necessidade de calibrações e repetições das etapas do procedimento. O objetivo deste trabalho é o desenvolvimento de uma interface homem-máquina (IHM) que integre todas as etapas experimentais das técnicas de Moiré e Shearografia, com possibilidade de configuração das etapas e visualização dos resultados em tempo real e estático, além da aplicação em campo com uso de técnicas de visão de máquina. A aplicação em tempo real facilita possíveis alterações nas etapas ou no arranjo experimental, além de possibilitar a obtenção de diversos padrões com diferentes objetivos. Os resultados obtidos comprovam a qualidade, a velocidade e a fácil configuração das etapas experimentais através da IHM desenvolvida.Universidade Federal de LavrasPrograma de Pós-Graduação em Engenharia de Sistemas e AutomaçãoUFLAbrasilDepartamento de EngenhariaBraga Júnior, Roberto AlvesSilveira, Henrique LeandroRufino, Carlos AntônioViana, Dimitri CamposPereira, Paulo Henrique CruzSilva, Raphael Muniz Siquara2020-06-19T13:28:58Z2020-06-19T13:28:58Z2020-06-192020-03-05info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfSILVA, R. M. S. Desenvolvimento de IHM para técnicas de metrologia óptica por interferência. 2020. 80 p. Dissertação (Mestrado em Engenharia de Sistemas e Automação)-Universidade Federal de Lavras, Lavras, 2020.http://repositorio.ufla.br/jspui/handle/1/41486porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFLAinstname:Universidade Federal de Lavras (UFLA)instacron:UFLA2023-05-02T12:40:49Zoai:localhost:1/41486Repositório InstitucionalPUBhttp://repositorio.ufla.br/oai/requestnivaldo@ufla.br || repositorio.biblioteca@ufla.bropendoar:2023-05-02T12:40:49Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA)false |
dc.title.none.fl_str_mv |
Desenvolvimento de IHM para técnicas de metrologia óptica por interferência |
title |
Desenvolvimento de IHM para técnicas de metrologia óptica por interferência |
spellingShingle |
Desenvolvimento de IHM para técnicas de metrologia óptica por interferência Silva, Raphael Muniz Siquara Moiré Shearografia Metrologia óptica Interface homem-máquina Shearography Machine vision Human-machine interface Engenharia |
title_short |
Desenvolvimento de IHM para técnicas de metrologia óptica por interferência |
title_full |
Desenvolvimento de IHM para técnicas de metrologia óptica por interferência |
title_fullStr |
Desenvolvimento de IHM para técnicas de metrologia óptica por interferência |
title_full_unstemmed |
Desenvolvimento de IHM para técnicas de metrologia óptica por interferência |
title_sort |
Desenvolvimento de IHM para técnicas de metrologia óptica por interferência |
author |
Silva, Raphael Muniz Siquara |
author_facet |
Silva, Raphael Muniz Siquara |
author_role |
author |
dc.contributor.none.fl_str_mv |
Braga Júnior, Roberto Alves Silveira, Henrique Leandro Rufino, Carlos Antônio Viana, Dimitri Campos Pereira, Paulo Henrique Cruz |
dc.contributor.author.fl_str_mv |
Silva, Raphael Muniz Siquara |
dc.subject.por.fl_str_mv |
Moiré Shearografia Metrologia óptica Interface homem-máquina Shearography Machine vision Human-machine interface Engenharia |
topic |
Moiré Shearografia Metrologia óptica Interface homem-máquina Shearography Machine vision Human-machine interface Engenharia |
description |
The non-destructive testing applied to the study of deformation, strain, profile, and the structural fault has great importance in obtaining information relative to the structure and material properties, being essential for example in production quality control and industrial maintenance area. Optical metrology techniques by interference such as Moiré and Shearography are widely used to obtain such information, mainly due to its field application capacity, being not intrusive, having good precision, visual quality, and real-time exhibition possibility. To obtain the final results of both techniques, a set of sequential steps is necessary, involving the initial procedures of the adequacy of the patterns obtained to the studied physical information recovery. Such steps may require the use of different programs and procedures, which makes the experience difficult if the results are not adequate or if it is necessary to make any alteration in the experimental physical setup, requiring a long time due to the need for calibrations and repetitions of the procedure steps. The objective of this work is the development of a human-machine interface (HMI) that integrates all the experimental steps of the Moiré and Shearography techniques, with the possibility of configuring the steps and visualizing the results in real and static time, in addition to application in the field with the use of machine vision. The real-time application facilitates possible changes in the steps or experimental arrangement, in addition to making it possible to obtain different patterns with different objectives. The results obtained prove the quality, speed, and easy configuration of the experimental steps through the developed HMI. |
publishDate |
2020 |
dc.date.none.fl_str_mv |
2020-06-19T13:28:58Z 2020-06-19T13:28:58Z 2020-06-19 2020-03-05 |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
SILVA, R. M. S. Desenvolvimento de IHM para técnicas de metrologia óptica por interferência. 2020. 80 p. Dissertação (Mestrado em Engenharia de Sistemas e Automação)-Universidade Federal de Lavras, Lavras, 2020. http://repositorio.ufla.br/jspui/handle/1/41486 |
identifier_str_mv |
SILVA, R. M. S. Desenvolvimento de IHM para técnicas de metrologia óptica por interferência. 2020. 80 p. Dissertação (Mestrado em Engenharia de Sistemas e Automação)-Universidade Federal de Lavras, Lavras, 2020. |
url |
http://repositorio.ufla.br/jspui/handle/1/41486 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Lavras Programa de Pós-Graduação em Engenharia de Sistemas e Automação UFLA brasil Departamento de Engenharia |
publisher.none.fl_str_mv |
Universidade Federal de Lavras Programa de Pós-Graduação em Engenharia de Sistemas e Automação UFLA brasil Departamento de Engenharia |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFLA instname:Universidade Federal de Lavras (UFLA) instacron:UFLA |
instname_str |
Universidade Federal de Lavras (UFLA) |
instacron_str |
UFLA |
institution |
UFLA |
reponame_str |
Repositório Institucional da UFLA |
collection |
Repositório Institucional da UFLA |
repository.name.fl_str_mv |
Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA) |
repository.mail.fl_str_mv |
nivaldo@ufla.br || repositorio.biblioteca@ufla.br |
_version_ |
1807835198753079296 |