O uso de modelos matemáticos na estimativa da densidade básica da madeira em plantios de clones de Eucalyptus sp.

Detalhes bibliográficos
Autor(a) principal: Thiersch, Cláudio Roberto
Data de Publicação: 2015
Outros Autores: Scolforo, Jose Roberto, Oliveira, Antonio Donizette de, Rezende, Gabriel Dehon Sampaio Peçanha, Maestri, Romualdo
Tipo de documento: Artigo
Idioma: por
Título da fonte: Repositório Institucional da UFLA
Texto Completo: http://www.cerne.ufla.br/site/index.php/CERNE/article/view/388
http://repositorio.ufla.br/jspui/handle/1/14444
Resumo: This study aimed at identifying at what point in the stem, in the longitudinal and cardinal direction, the pylodin penetration depth should be measured, for determining wood basic density, envisaging forestry inventory Data base used in compassed 36 parcels of 400 m2. Around the parcels 216 trees were sealed. Two clones (hybrid of E. grandis and E. urophylla), at the ages of 3; 4, 5 and 6 years, belonging to three different sites in East Brazil, encompassing East and Northeast of Espirito Santo state and south of Bahia state. In each measuring height of diameters it was also measured the penetration depth of the pylodin (in mm). The average basic density of scaled trees, was determined, departing from the cheaps, using the immersion method. The main conclusions were: The density equation, as function of the pylodin measures, age, site, diameters at 1.3m of ground and total height, was more precise, exact and stable than the density equation as function of pylodin, age, site and diameter, which in turn was more exact and stable than the density equation, as function of pylodin measures, age, site, diameter at a 1.3m of the ground and of total height, was precise and exact for all ages and sites, in dependent on if the pylodin measurements were taken in the South or in North fares, or in the average position between them. The height for measurement with pylodin can also be taken in the more ergonomic position of 1.3m. The density estimation, as a function of the measures with the pylodin, or as a function of the use of the pylodin, age, average dominant tree height an diameter at 1.3m of the ground, for both clones, was more precise when the measure with the pylodin was taken at the North face. The average tree basic density must always be taken by a specific equation for each clone, given that these equations differ statistically.
id UFLA_4553a6c290e28932fa7f09e386c19ee6
oai_identifier_str oai:localhost:1/14444
network_acronym_str UFLA
network_name_str Repositório Institucional da UFLA
repository_id_str
spelling O uso de modelos matemáticos na estimativa da densidade básica da madeira em plantios de clones de Eucalyptus sp.The use of mathematical models for estimating wood basic density of Eucalyptus sp clonesWood basic densityEucalyptus - ClonesIdentity testDensidade básica da madeiraIdentidade de modelosEucalipto - ClonesThis study aimed at identifying at what point in the stem, in the longitudinal and cardinal direction, the pylodin penetration depth should be measured, for determining wood basic density, envisaging forestry inventory Data base used in compassed 36 parcels of 400 m2. Around the parcels 216 trees were sealed. Two clones (hybrid of E. grandis and E. urophylla), at the ages of 3; 4, 5 and 6 years, belonging to three different sites in East Brazil, encompassing East and Northeast of Espirito Santo state and south of Bahia state. In each measuring height of diameters it was also measured the penetration depth of the pylodin (in mm). The average basic density of scaled trees, was determined, departing from the cheaps, using the immersion method. The main conclusions were: The density equation, as function of the pylodin measures, age, site, diameters at 1.3m of ground and total height, was more precise, exact and stable than the density equation as function of pylodin, age, site and diameter, which in turn was more exact and stable than the density equation, as function of pylodin measures, age, site, diameter at a 1.3m of the ground and of total height, was precise and exact for all ages and sites, in dependent on if the pylodin measurements were taken in the South or in North fares, or in the average position between them. The height for measurement with pylodin can also be taken in the more ergonomic position of 1.3m. The density estimation, as a function of the measures with the pylodin, or as a function of the use of the pylodin, age, average dominant tree height an diameter at 1.3m of the ground, for both clones, was more precise when the measure with the pylodin was taken at the North face. The average tree basic density must always be taken by a specific equation for each clone, given that these equations differ statistically.The use of mathematical models for estimating wood basic density of Eucalyptus sp clonesEste estudo teve como objetivo avaliar o uso do pilodyn e de variáveis dendrométricas no desenvolvimento de modelos para estimar a densidade básica da madeira de clones de Eucalyptus spp, visando a sua utilização no inventário florestal. A base de dados foi composta por 36 parcelas de 400 m2 , em torno das quais foram cubadas 216 árvores. Foram avaliados 2 clones (híbridos de Eucalyptus grandis e Eucalyptus urophylla), nas idades 3, 4,5 e 6 anos, provenientes de três sítios, na região leste do Brasil, abrangendo a parte leste e nordeste do Estado do Espírito Santo e o extremo sul do Estado da Bahia. Em cada altura de medição dos diâmetros, na cubagem rigorosa, foi mensurada, também, a profundidade de penetração do pilodyn em mm. A densidade básica média das árvores cubadas foi determinada a partir de seus cavacos utilizando-se o método de imersão. Os principais resultados encontrados foram: A equação de densidade, em função da medida do pilodyn, da idade, do sítio, do diâmetro a 1,30 m do solo e da altura total, foi mais precisa, mais exata e mais estável que a equação de densidade, em função do pilodyn, da idade, do sítio e do diâmetro, que por sua vez, foi mais precisa, mais exata e mais estável que a equação de densidade, em função do pilodyn, para os dois clones estudados. A equação de densidade, em função da medida com o pilodyn, da idade, do sítio, do diâmetro a 1,30 m do solo e da altura total, foi precisa e exata para todas as idades e sítios, independentemente, da medida com o pilodyn ser tomada na face norte, na face sul ou na média destas, podendo, também, a altura de medição com o pilodyn ser tomada na posição ergonomicamente confortável de 1,3 m. A estimativa da densidade, em função das medidas com o pilodyn, ou em função do uso do pilodyn, idade, altura média das árvores dominantes e diâmetro a 1,3 m do solo, seja para o clone 1 ou 2, foi mais precisa, quando a medida com o pilodyn foi tomada na face norte. A densidade básica média da árvore deve, em qualquer circunstância, ser estimada por uma equação específica para cada clone, visto que as equações ajustadas para estimar a densidade para cada um deles, não são idênticas estatisticamenteCERNE2015-09-162017-08-01T20:14:40Z2017-08-01T20:14:40Z2017-08-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfapplication/pdfhttp://www.cerne.ufla.br/site/index.php/CERNE/article/view/388THIERSCH, C. R. et al. O uso de modelos matemáticos na estimativa da densidade básica da madeira em plantios de clones de Eucalyptus sp. Cerne, Lavras, v. 12, n. 3, p. 264-278, jul./set. 2006.http://repositorio.ufla.br/jspui/handle/1/14444CERNE; Vol 12 No 3 (2006); 264-278CERNE; Vol 12 No 3 (2006); 264-2782317-63420104-7760reponame:Repositório Institucional da UFLAinstname:Universidade Federal de Lavras (UFLA)instacron:UFLAporhttp://www.cerne.ufla.br/site/index.php/CERNE/article/view/388/331Copyright (c) 2015 CERNEAttribution 4.0 Internationalhttp://creativecommons.org/licenses/by/4.0/info:eu-repo/semantics/openAccessThiersch, Cláudio RobertoScolforo, Jose RobertoOliveira, Antonio Donizette deRezende, Gabriel Dehon Sampaio PeçanhaMaestri, Romualdo2021-04-29T18:16:36Zoai:localhost:1/14444Repositório InstitucionalPUBhttp://repositorio.ufla.br/oai/requestnivaldo@ufla.br || repositorio.biblioteca@ufla.bropendoar:2021-04-29T18:16:36Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA)false
dc.title.none.fl_str_mv O uso de modelos matemáticos na estimativa da densidade básica da madeira em plantios de clones de Eucalyptus sp.
The use of mathematical models for estimating wood basic density of Eucalyptus sp clones
title O uso de modelos matemáticos na estimativa da densidade básica da madeira em plantios de clones de Eucalyptus sp.
spellingShingle O uso de modelos matemáticos na estimativa da densidade básica da madeira em plantios de clones de Eucalyptus sp.
Thiersch, Cláudio Roberto
Wood basic density
Eucalyptus - Clones
Identity test
Densidade básica da madeira
Identidade de modelos
Eucalipto - Clones
title_short O uso de modelos matemáticos na estimativa da densidade básica da madeira em plantios de clones de Eucalyptus sp.
title_full O uso de modelos matemáticos na estimativa da densidade básica da madeira em plantios de clones de Eucalyptus sp.
title_fullStr O uso de modelos matemáticos na estimativa da densidade básica da madeira em plantios de clones de Eucalyptus sp.
title_full_unstemmed O uso de modelos matemáticos na estimativa da densidade básica da madeira em plantios de clones de Eucalyptus sp.
title_sort O uso de modelos matemáticos na estimativa da densidade básica da madeira em plantios de clones de Eucalyptus sp.
author Thiersch, Cláudio Roberto
author_facet Thiersch, Cláudio Roberto
Scolforo, Jose Roberto
Oliveira, Antonio Donizette de
Rezende, Gabriel Dehon Sampaio Peçanha
Maestri, Romualdo
author_role author
author2 Scolforo, Jose Roberto
Oliveira, Antonio Donizette de
Rezende, Gabriel Dehon Sampaio Peçanha
Maestri, Romualdo
author2_role author
author
author
author
dc.contributor.author.fl_str_mv Thiersch, Cláudio Roberto
Scolforo, Jose Roberto
Oliveira, Antonio Donizette de
Rezende, Gabriel Dehon Sampaio Peçanha
Maestri, Romualdo
dc.subject.por.fl_str_mv Wood basic density
Eucalyptus - Clones
Identity test
Densidade básica da madeira
Identidade de modelos
Eucalipto - Clones
topic Wood basic density
Eucalyptus - Clones
Identity test
Densidade básica da madeira
Identidade de modelos
Eucalipto - Clones
description This study aimed at identifying at what point in the stem, in the longitudinal and cardinal direction, the pylodin penetration depth should be measured, for determining wood basic density, envisaging forestry inventory Data base used in compassed 36 parcels of 400 m2. Around the parcels 216 trees were sealed. Two clones (hybrid of E. grandis and E. urophylla), at the ages of 3; 4, 5 and 6 years, belonging to three different sites in East Brazil, encompassing East and Northeast of Espirito Santo state and south of Bahia state. In each measuring height of diameters it was also measured the penetration depth of the pylodin (in mm). The average basic density of scaled trees, was determined, departing from the cheaps, using the immersion method. The main conclusions were: The density equation, as function of the pylodin measures, age, site, diameters at 1.3m of ground and total height, was more precise, exact and stable than the density equation as function of pylodin, age, site and diameter, which in turn was more exact and stable than the density equation, as function of pylodin measures, age, site, diameter at a 1.3m of the ground and of total height, was precise and exact for all ages and sites, in dependent on if the pylodin measurements were taken in the South or in North fares, or in the average position between them. The height for measurement with pylodin can also be taken in the more ergonomic position of 1.3m. The density estimation, as a function of the measures with the pylodin, or as a function of the use of the pylodin, age, average dominant tree height an diameter at 1.3m of the ground, for both clones, was more precise when the measure with the pylodin was taken at the North face. The average tree basic density must always be taken by a specific equation for each clone, given that these equations differ statistically.
publishDate 2015
dc.date.none.fl_str_mv 2015-09-16
2017-08-01T20:14:40Z
2017-08-01T20:14:40Z
2017-08-01
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://www.cerne.ufla.br/site/index.php/CERNE/article/view/388
THIERSCH, C. R. et al. O uso de modelos matemáticos na estimativa da densidade básica da madeira em plantios de clones de Eucalyptus sp. Cerne, Lavras, v. 12, n. 3, p. 264-278, jul./set. 2006.
http://repositorio.ufla.br/jspui/handle/1/14444
url http://www.cerne.ufla.br/site/index.php/CERNE/article/view/388
http://repositorio.ufla.br/jspui/handle/1/14444
identifier_str_mv THIERSCH, C. R. et al. O uso de modelos matemáticos na estimativa da densidade básica da madeira em plantios de clones de Eucalyptus sp. Cerne, Lavras, v. 12, n. 3, p. 264-278, jul./set. 2006.
dc.language.iso.fl_str_mv por
language por
dc.relation.none.fl_str_mv http://www.cerne.ufla.br/site/index.php/CERNE/article/view/388/331
dc.rights.driver.fl_str_mv Copyright (c) 2015 CERNE
Attribution 4.0 International
http://creativecommons.org/licenses/by/4.0/
info:eu-repo/semantics/openAccess
rights_invalid_str_mv Copyright (c) 2015 CERNE
Attribution 4.0 International
http://creativecommons.org/licenses/by/4.0/
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
application/pdf
dc.publisher.none.fl_str_mv CERNE
publisher.none.fl_str_mv CERNE
dc.source.none.fl_str_mv CERNE; Vol 12 No 3 (2006); 264-278
CERNE; Vol 12 No 3 (2006); 264-278
2317-6342
0104-7760
reponame:Repositório Institucional da UFLA
instname:Universidade Federal de Lavras (UFLA)
instacron:UFLA
instname_str Universidade Federal de Lavras (UFLA)
instacron_str UFLA
institution UFLA
reponame_str Repositório Institucional da UFLA
collection Repositório Institucional da UFLA
repository.name.fl_str_mv Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA)
repository.mail.fl_str_mv nivaldo@ufla.br || repositorio.biblioteca@ufla.br
_version_ 1784550150984695808