Desenvolvimento de um protótipo de uma câmara de cultivo de plantas

Detalhes bibliográficos
Autor(a) principal: Silva, Layane
Data de Publicação: 2020
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Repositório Institucional da UFLA
Texto Completo: http://repositorio.ufla.br/jspui/handle/1/39201
Resumo: Growing plants demands time and specific knowledge, which may present a hindrance for the city dweller, resulting in an underestimated use of urban areas. Developing a grow device, which mimics the required environmental conditions for plants, would reduce efforts in the maintenance of home gardens and would favor food production in the cities. The present work aimed the construction of a prototype for growing plants through the optimization of light and temperature, two of the most relevant parameters in the plant production. The equipment had outside dimensions of 70 cm (H) x 15 cm (d) and it was built from a PVC tube. The cooling system had an exhaust fan on the top side and four holes on the bottom side for air entrance. The light system was designed with LEDs in the red, blue and white spectrum, connected to a potentiometer for individual spectrum regulation. Two versions of the prototype were tested, which differ from each other mostly in terms of material (with or without an aluminum layer), in the quantity and types of LED, and in the position of the light source (on stages in the second version). Intensity and quality of the resulting light were measured in different experimental designs. A temperature profile was built for different environmental conditions with support of geostatistics. The final version achieved a light intensity of approximately 140 μmol m 2 s -1 and an average inner temperature of 24°C, with all lights on on the first stage and a controlled environment at 19°C. The effectiveness of the grow prototype was demonstrated by growing a healthy and capable of flowering Arabidopsis thaliana.
id UFLA_9df0bb157906405b195b4b0b4c1c6b61
oai_identifier_str oai:localhost:1/39201
network_acronym_str UFLA
network_name_str Repositório Institucional da UFLA
repository_id_str
spelling Desenvolvimento de um protótipo de uma câmara de cultivo de plantasDevelopment of a grow plant chamber prototypeCâmara de cultivoHorta urbanaIluminação artificialPerfil de temperaturaGeoestatísticaGrow chamberHome gardensArtificial lightingTemperature profileGeostatisticsGeostatisticsGrowing plants demands time and specific knowledge, which may present a hindrance for the city dweller, resulting in an underestimated use of urban areas. Developing a grow device, which mimics the required environmental conditions for plants, would reduce efforts in the maintenance of home gardens and would favor food production in the cities. The present work aimed the construction of a prototype for growing plants through the optimization of light and temperature, two of the most relevant parameters in the plant production. The equipment had outside dimensions of 70 cm (H) x 15 cm (d) and it was built from a PVC tube. The cooling system had an exhaust fan on the top side and four holes on the bottom side for air entrance. The light system was designed with LEDs in the red, blue and white spectrum, connected to a potentiometer for individual spectrum regulation. Two versions of the prototype were tested, which differ from each other mostly in terms of material (with or without an aluminum layer), in the quantity and types of LED, and in the position of the light source (on stages in the second version). Intensity and quality of the resulting light were measured in different experimental designs. A temperature profile was built for different environmental conditions with support of geostatistics. The final version achieved a light intensity of approximately 140 μmol m 2 s -1 and an average inner temperature of 24°C, with all lights on on the first stage and a controlled environment at 19°C. The effectiveness of the grow prototype was demonstrated by growing a healthy and capable of flowering Arabidopsis thaliana.Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)O cultivo de plantas exige tempo e conhecimentos técnicos, representando um empecilho para o morador das cidades e contribuindo para o uso subestimado dos espaços urbanos. O desenvolvimento de um dispositivo de cultivo, que mimetize as condições ambientais necessárias para o crescimento da planta, reduziria os esforços na manutenção de hortas domésticas e favoreceria a produção de alimentos no perímetro urbano. O presente trabalho objetivou a construção de um protótipo para o cultivo através da otimização da radiação e da temperatura, dois dos parâmetros que merecem especial atenção pela sua importância na produção vegetal. O equipamento com dimensões de 70 cm (H) x 15 cm (d) foi construído a partir de um tubo de PVC. O sistema de arrefecimento contou com um exaustor na parte superior e aberturas na parte inferior para a circulação de ar. O sistema de iluminação foi feito com lâmpadas de LED nas bandas do vermelho, azul e branco, ligados a um potenciômetro para regulação individual de cada uma das bandas. Duas versões do protótipo foram testadas, diferindo uma da outra principalmente no material de revestimento (com ou sem película de alumínio), na quantidade e tipo de LED utilizado e na posição da fonte de luz (dividida em estágios, na segunda versão). Para cada versão, foram aferidas a quantidade e qualidade da radiação resultante em diversos arranjos, e, também, foram construídos perfis de temperatura, com auxílio de geoestatística, para diferentes condições ambientes. A versão final alcançou uma quantidade de radiação de aproximadamente 140 μmol m 2 s -1 e uma temperatura média no interior do dispositivo de 24°C, com as luzes ligadas no primeiro estágio, em ambiente controlado a 19°C . A efetividade do protótipo para o crescimento de planta foi demonstrada com Arabidopsis thaliana, obtendo uma planta sadia e apta a produzir flores.Universidade Federal de LavrasPrograma de Pós-Graduação em Fisiologia VegetalUFLAbrasilDepartamento de BiologiaBarbosa, João Paulo R. A. D.Barbosa Filho, José Antônio DelfinoBarbosa, João Paulo Rodrigues Alves DelfinoMartins, Samuel Cordeiro VitorChalfun Júnior, AntônioSilva, Layane2020-03-06T12:36:21Z2020-03-06T12:36:21Z2020-03-162020-02-19info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfSILVA, L. Desenvolvimento de um protótipo de uma câmara de cultivo de plantas. 2020. 106 p. Tese (Doutorado em Agronomia/Fisiologia Vegetal) - Universidade Federal de Lavras, Lavras, 2020.http://repositorio.ufla.br/jspui/handle/1/39201porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFLAinstname:Universidade Federal de Lavras (UFLA)instacron:UFLA2020-03-06T12:39:37Zoai:localhost:1/39201Repositório InstitucionalPUBhttp://repositorio.ufla.br/oai/requestnivaldo@ufla.br || repositorio.biblioteca@ufla.bropendoar:2020-03-06T12:39:37Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA)false
dc.title.none.fl_str_mv Desenvolvimento de um protótipo de uma câmara de cultivo de plantas
Development of a grow plant chamber prototype
title Desenvolvimento de um protótipo de uma câmara de cultivo de plantas
spellingShingle Desenvolvimento de um protótipo de uma câmara de cultivo de plantas
Silva, Layane
Câmara de cultivo
Horta urbana
Iluminação artificial
Perfil de temperatura
Geoestatística
Grow chamber
Home gardens
Artificial lighting
Temperature profile
Geostatistics
Geostatistics
title_short Desenvolvimento de um protótipo de uma câmara de cultivo de plantas
title_full Desenvolvimento de um protótipo de uma câmara de cultivo de plantas
title_fullStr Desenvolvimento de um protótipo de uma câmara de cultivo de plantas
title_full_unstemmed Desenvolvimento de um protótipo de uma câmara de cultivo de plantas
title_sort Desenvolvimento de um protótipo de uma câmara de cultivo de plantas
author Silva, Layane
author_facet Silva, Layane
author_role author
dc.contributor.none.fl_str_mv Barbosa, João Paulo R. A. D.
Barbosa Filho, José Antônio Delfino
Barbosa, João Paulo Rodrigues Alves Delfino
Martins, Samuel Cordeiro Vitor
Chalfun Júnior, Antônio
dc.contributor.author.fl_str_mv Silva, Layane
dc.subject.por.fl_str_mv Câmara de cultivo
Horta urbana
Iluminação artificial
Perfil de temperatura
Geoestatística
Grow chamber
Home gardens
Artificial lighting
Temperature profile
Geostatistics
Geostatistics
topic Câmara de cultivo
Horta urbana
Iluminação artificial
Perfil de temperatura
Geoestatística
Grow chamber
Home gardens
Artificial lighting
Temperature profile
Geostatistics
Geostatistics
description Growing plants demands time and specific knowledge, which may present a hindrance for the city dweller, resulting in an underestimated use of urban areas. Developing a grow device, which mimics the required environmental conditions for plants, would reduce efforts in the maintenance of home gardens and would favor food production in the cities. The present work aimed the construction of a prototype for growing plants through the optimization of light and temperature, two of the most relevant parameters in the plant production. The equipment had outside dimensions of 70 cm (H) x 15 cm (d) and it was built from a PVC tube. The cooling system had an exhaust fan on the top side and four holes on the bottom side for air entrance. The light system was designed with LEDs in the red, blue and white spectrum, connected to a potentiometer for individual spectrum regulation. Two versions of the prototype were tested, which differ from each other mostly in terms of material (with or without an aluminum layer), in the quantity and types of LED, and in the position of the light source (on stages in the second version). Intensity and quality of the resulting light were measured in different experimental designs. A temperature profile was built for different environmental conditions with support of geostatistics. The final version achieved a light intensity of approximately 140 μmol m 2 s -1 and an average inner temperature of 24°C, with all lights on on the first stage and a controlled environment at 19°C. The effectiveness of the grow prototype was demonstrated by growing a healthy and capable of flowering Arabidopsis thaliana.
publishDate 2020
dc.date.none.fl_str_mv 2020-03-06T12:36:21Z
2020-03-06T12:36:21Z
2020-03-16
2020-02-19
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv SILVA, L. Desenvolvimento de um protótipo de uma câmara de cultivo de plantas. 2020. 106 p. Tese (Doutorado em Agronomia/Fisiologia Vegetal) - Universidade Federal de Lavras, Lavras, 2020.
http://repositorio.ufla.br/jspui/handle/1/39201
identifier_str_mv SILVA, L. Desenvolvimento de um protótipo de uma câmara de cultivo de plantas. 2020. 106 p. Tese (Doutorado em Agronomia/Fisiologia Vegetal) - Universidade Federal de Lavras, Lavras, 2020.
url http://repositorio.ufla.br/jspui/handle/1/39201
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Lavras
Programa de Pós-Graduação em Fisiologia Vegetal
UFLA
brasil
Departamento de Biologia
publisher.none.fl_str_mv Universidade Federal de Lavras
Programa de Pós-Graduação em Fisiologia Vegetal
UFLA
brasil
Departamento de Biologia
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFLA
instname:Universidade Federal de Lavras (UFLA)
instacron:UFLA
instname_str Universidade Federal de Lavras (UFLA)
instacron_str UFLA
institution UFLA
reponame_str Repositório Institucional da UFLA
collection Repositório Institucional da UFLA
repository.name.fl_str_mv Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA)
repository.mail.fl_str_mv nivaldo@ufla.br || repositorio.biblioteca@ufla.br
_version_ 1807835096419401728