Avaliação do desdobro de toras de Eucalyptus para a obtenção de peças estruturais
Autor(a) principal: | |
---|---|
Data de Publicação: | 2016 |
Outros Autores: | , , , |
Tipo de documento: | Artigo |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFLA |
Texto Completo: | http://repositorio.ufla.br/jspui/handle/1/14346 |
Resumo: | The control over the products of the sawing of logs is important for the management of the sawmill and also to reduce environmental impacts. The yield and the time study are parameters for the assessment of unfolding in a sawmill. This study aimed to evaluate the yield and the time study of the sawing of Eucalyptus logs during the production of structural parts. This work used ten logs of Eucalyptus grandis from a plantation with 15 years of age, taken from an area of the Federal University of Lavras (UFLA). In the experimental sawmill of UFLA the logs were sawn using a band saw and the planks were resawn in a circular saw. The structural parts followed the dimensions laid down in the NBR 7190 (ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS - ABNT, 1997). The parts produced were measured and calculated yield. The times of all stages of the process were obtained using a stopwatch and then analyzed the time actually sawing and the processing time of logs and planks. The average of yield for the production of main parts was 20.9% and secondary part was 22.9%. Average yield of sawing was satisfactory if compared with the values obtained in other studies. The circular saw compared to band saw showed higher percentage of effective time sawing of wood. The effective time of sawing was less than half the total processing time of the logs. |
id |
UFLA_a2e4ac2b609f979d5c8a8e5396ef726d |
---|---|
oai_identifier_str |
oai:localhost:1/14346 |
network_acronym_str |
UFLA |
network_name_str |
Repositório Institucional da UFLA |
repository_id_str |
|
spelling |
Avaliação do desdobro de toras de Eucalyptus para a obtenção de peças estruturaisEvaluation of Eucalyptus sawmill log to obtain structural partsSerrariaRendimentoEstudo do tempoMadeira serradaSawmillYieldTime studyStructural partsSawed woodThe control over the products of the sawing of logs is important for the management of the sawmill and also to reduce environmental impacts. The yield and the time study are parameters for the assessment of unfolding in a sawmill. This study aimed to evaluate the yield and the time study of the sawing of Eucalyptus logs during the production of structural parts. This work used ten logs of Eucalyptus grandis from a plantation with 15 years of age, taken from an area of the Federal University of Lavras (UFLA). In the experimental sawmill of UFLA the logs were sawn using a band saw and the planks were resawn in a circular saw. The structural parts followed the dimensions laid down in the NBR 7190 (ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS - ABNT, 1997). The parts produced were measured and calculated yield. The times of all stages of the process were obtained using a stopwatch and then analyzed the time actually sawing and the processing time of logs and planks. The average of yield for the production of main parts was 20.9% and secondary part was 22.9%. Average yield of sawing was satisfactory if compared with the values obtained in other studies. The circular saw compared to band saw showed higher percentage of effective time sawing of wood. The effective time of sawing was less than half the total processing time of the logs.O controle sobre os produtos obtidos no desdobro das toras é importante para a gestão da serraria e também para a redução dos impactos ao ambiente. O rendimento e o estudo de tempo são parâmetros para a avaliação do desdobro em uma serraria. No presente trabalho, objetivou-se avaliar o rendimento e o estudo dos tempos do desdobro de toras de Eucalyptus durante a produção de peças estruturais. Foram utilizadas dez toras de Eucalyptusgrandis provenientes de um plantio com 15 anos de idade, retiradas de uma área da Universidade Federal de Lavras (UFLA). Na serraria experimental da UFLA, as toras foram serradas utilizando uma serra de fita e os pranchões foram resserrados em uma serra circular. As peças seguiram as dimensões estabelecidas na NBR 7190 (ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS - ABNT, 1997). As peças produzidas foram mensuradas e o rendimento calculado. Os tempos de todas as etapas do processo foram obtidos por meio de um cronometro e, em seguida, analisados os tempos efetivamente serrando e o tempo total de processamento das toras e pranchões. O rendimento médio do desdobro para a produção de peças principais foi de 20,9% e de peças secundárias foi de 22,9%. O rendimento médio do desdobro foi satisfatório, dentro dos valores obtidos em outros trabalhos. A serra circular quando comparada a serra de fita apresentou maior porcentagem de tempo efetivamente serrando a madeira. O tempo, efetivamente serrando, foi menos da metade do tempo total de processamento das toras.Universidade Federal de Lavras (UFLA)2016-04-062017-08-01T20:14:20Z2017-08-01T20:14:20Z2017-08-01info:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersionapplication/pdfMONTEIRO, T. C. et al. Avaliação do desdobro de toras de Eucalyptus para a obtenção de peças estruturais. CERNE, Lavras, v. 19, n. 3, p. 357-364, jul./set. 2013.http://repositorio.ufla.br/jspui/handle/1/143462317-63420104-7760reponame:Repositório Institucional da UFLAinstname:Universidade Federal de Lavras (UFLA)instacron:UFLAporhttp://www.cerne.ufla.br/site/index.php/CERNE/article/view/911/688Copyright (c) 2016 CERNEAttribution 4.0 Internationalhttp://creativecommons.org/licenses/by/4.0/info:eu-repo/semantics/openAccessMonteiro, Thiago CamposLima, José TarcísioSilva, José Reinaldo Moreira daTrugilho, Paulo FernandoAndrade, Bruna Carolina Lage de2021-05-12T23:44:26Zoai:localhost:1/14346Repositório InstitucionalPUBhttp://repositorio.ufla.br/oai/requestnivaldo@ufla.br || repositorio.biblioteca@ufla.bropendoar:2021-05-12T23:44:26Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA)false |
dc.title.none.fl_str_mv |
Avaliação do desdobro de toras de Eucalyptus para a obtenção de peças estruturais Evaluation of Eucalyptus sawmill log to obtain structural parts |
title |
Avaliação do desdobro de toras de Eucalyptus para a obtenção de peças estruturais |
spellingShingle |
Avaliação do desdobro de toras de Eucalyptus para a obtenção de peças estruturais Monteiro, Thiago Campos Serraria Rendimento Estudo do tempo Madeira serrada Sawmill Yield Time study Structural parts Sawed wood |
title_short |
Avaliação do desdobro de toras de Eucalyptus para a obtenção de peças estruturais |
title_full |
Avaliação do desdobro de toras de Eucalyptus para a obtenção de peças estruturais |
title_fullStr |
Avaliação do desdobro de toras de Eucalyptus para a obtenção de peças estruturais |
title_full_unstemmed |
Avaliação do desdobro de toras de Eucalyptus para a obtenção de peças estruturais |
title_sort |
Avaliação do desdobro de toras de Eucalyptus para a obtenção de peças estruturais |
author |
Monteiro, Thiago Campos |
author_facet |
Monteiro, Thiago Campos Lima, José Tarcísio Silva, José Reinaldo Moreira da Trugilho, Paulo Fernando Andrade, Bruna Carolina Lage de |
author_role |
author |
author2 |
Lima, José Tarcísio Silva, José Reinaldo Moreira da Trugilho, Paulo Fernando Andrade, Bruna Carolina Lage de |
author2_role |
author author author author |
dc.contributor.author.fl_str_mv |
Monteiro, Thiago Campos Lima, José Tarcísio Silva, José Reinaldo Moreira da Trugilho, Paulo Fernando Andrade, Bruna Carolina Lage de |
dc.subject.por.fl_str_mv |
Serraria Rendimento Estudo do tempo Madeira serrada Sawmill Yield Time study Structural parts Sawed wood |
topic |
Serraria Rendimento Estudo do tempo Madeira serrada Sawmill Yield Time study Structural parts Sawed wood |
description |
The control over the products of the sawing of logs is important for the management of the sawmill and also to reduce environmental impacts. The yield and the time study are parameters for the assessment of unfolding in a sawmill. This study aimed to evaluate the yield and the time study of the sawing of Eucalyptus logs during the production of structural parts. This work used ten logs of Eucalyptus grandis from a plantation with 15 years of age, taken from an area of the Federal University of Lavras (UFLA). In the experimental sawmill of UFLA the logs were sawn using a band saw and the planks were resawn in a circular saw. The structural parts followed the dimensions laid down in the NBR 7190 (ASSOCIAÇÃO BRASILEIRA DE NORMAS TÉCNICAS - ABNT, 1997). The parts produced were measured and calculated yield. The times of all stages of the process were obtained using a stopwatch and then analyzed the time actually sawing and the processing time of logs and planks. The average of yield for the production of main parts was 20.9% and secondary part was 22.9%. Average yield of sawing was satisfactory if compared with the values obtained in other studies. The circular saw compared to band saw showed higher percentage of effective time sawing of wood. The effective time of sawing was less than half the total processing time of the logs. |
publishDate |
2016 |
dc.date.none.fl_str_mv |
2016-04-06 2017-08-01T20:14:20Z 2017-08-01T20:14:20Z 2017-08-01 |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/article info:eu-repo/semantics/publishedVersion |
format |
article |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
MONTEIRO, T. C. et al. Avaliação do desdobro de toras de Eucalyptus para a obtenção de peças estruturais. CERNE, Lavras, v. 19, n. 3, p. 357-364, jul./set. 2013. http://repositorio.ufla.br/jspui/handle/1/14346 |
identifier_str_mv |
MONTEIRO, T. C. et al. Avaliação do desdobro de toras de Eucalyptus para a obtenção de peças estruturais. CERNE, Lavras, v. 19, n. 3, p. 357-364, jul./set. 2013. |
url |
http://repositorio.ufla.br/jspui/handle/1/14346 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.relation.none.fl_str_mv |
http://www.cerne.ufla.br/site/index.php/CERNE/article/view/911/688 |
dc.rights.driver.fl_str_mv |
Copyright (c) 2016 CERNE Attribution 4.0 International http://creativecommons.org/licenses/by/4.0/ info:eu-repo/semantics/openAccess |
rights_invalid_str_mv |
Copyright (c) 2016 CERNE Attribution 4.0 International http://creativecommons.org/licenses/by/4.0/ |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal de Lavras (UFLA) |
publisher.none.fl_str_mv |
Universidade Federal de Lavras (UFLA) |
dc.source.none.fl_str_mv |
2317-6342 0104-7760 reponame:Repositório Institucional da UFLA instname:Universidade Federal de Lavras (UFLA) instacron:UFLA |
instname_str |
Universidade Federal de Lavras (UFLA) |
instacron_str |
UFLA |
institution |
UFLA |
reponame_str |
Repositório Institucional da UFLA |
collection |
Repositório Institucional da UFLA |
repository.name.fl_str_mv |
Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA) |
repository.mail.fl_str_mv |
nivaldo@ufla.br || repositorio.biblioteca@ufla.br |
_version_ |
1807835141307891712 |