Avaliação e modelagem de colapso em madeiras de Eucalyptus grandis

Detalhes bibliográficos
Autor(a) principal: Souza, Poliane Pereira de
Data de Publicação: 2018
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Repositório Institucional da UFLA
Texto Completo: http://repositorio.ufla.br/jspui/handle/1/30241
Resumo: Wood drying is a fundamental step for its use in various purposes, however, drying is a difficult process for some species such as Eucalyptus grandis. The defects from wood drying are common in this specias with collapse as one of the major defects occurring during drying. Detailed information about this defect are scarce in the current literature. Therefore, it is justified to carry study collapse, since it is a defect with a large occurrence and that depreciates wood quality. This study is divided into chapters to explore as much information as possible about the defect in question. Chapter I presents a brief theoretical discussion about the main characteristics of the collapse. This chapter also discusses the main themes related to its occurrence: water movement in wood, drying, defects, permeability. Chapter II includes the physical and anatomical characterization of wood, the evaluation of collapse index and its correlations. The anatomical characteristics presented values within intervals characteristic of the species. The collapse index was considered strong for the studied trees and showed poor correlation with basic density, fiber width and vessel length. Chapter III proposes the collapse modeling as well as to obtain the curve of the humidity as a function of the time of drying and collapse curve, both during the exit of free water of the wood. From a logistic model with four parameters, estimation of area loss was possible by collapse and the critical point of deformation for each position. The samples that presented greater deformations due to collapse were those closer to the marrow of the trees. The critical point of collapse in the wood of Eucalyptus grandis was at 225 minutes, witch points to the need for caution that must exist in the first hours of drying for this species.
id UFLA_ecfa0fcd1feb6a5ad9cee7de1ea017fa
oai_identifier_str oai:localhost:1/30241
network_acronym_str UFLA
network_name_str Repositório Institucional da UFLA
repository_id_str
spelling Avaliação e modelagem de colapso em madeiras de Eucalyptus grandisEvaluation and modeling of collapse in Eucalyptus grandis woodMadeira - SecagemDefeitos de secagemWood - DryingDrying defectsPropriedades Físico-Mecânicas da MadeiraWood drying is a fundamental step for its use in various purposes, however, drying is a difficult process for some species such as Eucalyptus grandis. The defects from wood drying are common in this specias with collapse as one of the major defects occurring during drying. Detailed information about this defect are scarce in the current literature. Therefore, it is justified to carry study collapse, since it is a defect with a large occurrence and that depreciates wood quality. This study is divided into chapters to explore as much information as possible about the defect in question. Chapter I presents a brief theoretical discussion about the main characteristics of the collapse. This chapter also discusses the main themes related to its occurrence: water movement in wood, drying, defects, permeability. Chapter II includes the physical and anatomical characterization of wood, the evaluation of collapse index and its correlations. The anatomical characteristics presented values within intervals characteristic of the species. The collapse index was considered strong for the studied trees and showed poor correlation with basic density, fiber width and vessel length. Chapter III proposes the collapse modeling as well as to obtain the curve of the humidity as a function of the time of drying and collapse curve, both during the exit of free water of the wood. From a logistic model with four parameters, estimation of area loss was possible by collapse and the critical point of deformation for each position. The samples that presented greater deformations due to collapse were those closer to the marrow of the trees. The critical point of collapse in the wood of Eucalyptus grandis was at 225 minutes, witch points to the need for caution that must exist in the first hours of drying for this species.Fundação de Amparo à Pesquisa do Estado de Minas Gerais (FAPEMIG)A secagem da madeira é uma etapa fundamental para a sua utilização em diversas finalidades. Porém, a secagem é um processo difícil para algumas espécies, como é o caso do Eucalyptus grandis. Defeitos oriundos da secagem da madeira são comuns nesta espécie. O colapso é um dos principais defeitos que ocorrem durante a secagem. Informações detalhadas sobre este defeito são escassas na literatura atual. Portanto, justifica-se a realização de trabalhos sobre o colapso, visto que se trata de um defeito com ampla ocorrência e que deprecia a qualidade da madeira. O trabalho está divido em capítulos, visando explorar o máximo de informações sobre o defeito em questão. O capítulo I apresenta uma breve discussão teórica sobre as principais características do colapso. Esse capítulo aborda também os principais temas relacionados à ocorrência dele: movimentação de água na madeira, secagem, defeitos, permeabilidade. Capitulo II compreende a caracterização física e anatômica da madeira, a avaliação de índice de colapso e suas correlações. As características anatômicas apresentaram valores dentro de intervalos característicos da espécie. Comprimento de fibra e espessura de parede apresentaram tendência crescente da medula à casca. O índice de colapso foi considerado forte para as árvores estudadas e apresentou fraca correlação com densidade básica, largura da fibra e comprimento de vaso. Capítulo III propõe a realização da modelagem do colapso, bem como, obter a curva da umidade em função do tempo de secagem e curva de colapso, ambos durante a saída de agua livre da madeira. A partir de um modelo logístico com quatro parâmetros, foi possível estimar a perda de área por colapso e o ponto crítico de deformação para cada posição. As amostras que apresentaram maiores deformações em decorrência de colapso foram aquelas mais próximas da medula das árvores. O ponto crítico de colapso na madeira do Eucalyptus grandis foi aos 225 minutos, apontando para o cuidado que deve existir nas primeiras horas da secagem para esta espécie.Universidade Federal de LavrasPrograma de Pós-Graduação em Ciência e Tecnologia da MadeiraUFLAbrasilDepartamento de Ciências FlorestaisCalegario, NatalinoLima, José TarcísioCalegario, NatalinoLatorraca, João Vicente de FigueiredoAssis, Claudineia OlimpiaSouza, Poliane Pereira de2018-08-29T15:37:29Z2018-08-29T15:37:29Z2018-08-292018-02-27info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfSOUZA, P. P. de. Avaliação e modelagem de colapso em madeiras de Eucalyptus grandis. 2018. 59 p. Dissertação (Mestrado em Ciência e Tecnologia da Madeira)-Universidade Federal de Lavras, Lavras, 2018.http://repositorio.ufla.br/jspui/handle/1/30241porinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFLAinstname:Universidade Federal de Lavras (UFLA)instacron:UFLA2018-08-29T15:37:29Zoai:localhost:1/30241Repositório InstitucionalPUBhttp://repositorio.ufla.br/oai/requestnivaldo@ufla.br || repositorio.biblioteca@ufla.bropendoar:2018-08-29T15:37:29Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA)false
dc.title.none.fl_str_mv Avaliação e modelagem de colapso em madeiras de Eucalyptus grandis
Evaluation and modeling of collapse in Eucalyptus grandis wood
title Avaliação e modelagem de colapso em madeiras de Eucalyptus grandis
spellingShingle Avaliação e modelagem de colapso em madeiras de Eucalyptus grandis
Souza, Poliane Pereira de
Madeira - Secagem
Defeitos de secagem
Wood - Drying
Drying defects
Propriedades Físico-Mecânicas da Madeira
title_short Avaliação e modelagem de colapso em madeiras de Eucalyptus grandis
title_full Avaliação e modelagem de colapso em madeiras de Eucalyptus grandis
title_fullStr Avaliação e modelagem de colapso em madeiras de Eucalyptus grandis
title_full_unstemmed Avaliação e modelagem de colapso em madeiras de Eucalyptus grandis
title_sort Avaliação e modelagem de colapso em madeiras de Eucalyptus grandis
author Souza, Poliane Pereira de
author_facet Souza, Poliane Pereira de
author_role author
dc.contributor.none.fl_str_mv Calegario, Natalino
Lima, José Tarcísio
Calegario, Natalino
Latorraca, João Vicente de Figueiredo
Assis, Claudineia Olimpia
dc.contributor.author.fl_str_mv Souza, Poliane Pereira de
dc.subject.por.fl_str_mv Madeira - Secagem
Defeitos de secagem
Wood - Drying
Drying defects
Propriedades Físico-Mecânicas da Madeira
topic Madeira - Secagem
Defeitos de secagem
Wood - Drying
Drying defects
Propriedades Físico-Mecânicas da Madeira
description Wood drying is a fundamental step for its use in various purposes, however, drying is a difficult process for some species such as Eucalyptus grandis. The defects from wood drying are common in this specias with collapse as one of the major defects occurring during drying. Detailed information about this defect are scarce in the current literature. Therefore, it is justified to carry study collapse, since it is a defect with a large occurrence and that depreciates wood quality. This study is divided into chapters to explore as much information as possible about the defect in question. Chapter I presents a brief theoretical discussion about the main characteristics of the collapse. This chapter also discusses the main themes related to its occurrence: water movement in wood, drying, defects, permeability. Chapter II includes the physical and anatomical characterization of wood, the evaluation of collapse index and its correlations. The anatomical characteristics presented values within intervals characteristic of the species. The collapse index was considered strong for the studied trees and showed poor correlation with basic density, fiber width and vessel length. Chapter III proposes the collapse modeling as well as to obtain the curve of the humidity as a function of the time of drying and collapse curve, both during the exit of free water of the wood. From a logistic model with four parameters, estimation of area loss was possible by collapse and the critical point of deformation for each position. The samples that presented greater deformations due to collapse were those closer to the marrow of the trees. The critical point of collapse in the wood of Eucalyptus grandis was at 225 minutes, witch points to the need for caution that must exist in the first hours of drying for this species.
publishDate 2018
dc.date.none.fl_str_mv 2018-08-29T15:37:29Z
2018-08-29T15:37:29Z
2018-08-29
2018-02-27
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv SOUZA, P. P. de. Avaliação e modelagem de colapso em madeiras de Eucalyptus grandis. 2018. 59 p. Dissertação (Mestrado em Ciência e Tecnologia da Madeira)-Universidade Federal de Lavras, Lavras, 2018.
http://repositorio.ufla.br/jspui/handle/1/30241
identifier_str_mv SOUZA, P. P. de. Avaliação e modelagem de colapso em madeiras de Eucalyptus grandis. 2018. 59 p. Dissertação (Mestrado em Ciência e Tecnologia da Madeira)-Universidade Federal de Lavras, Lavras, 2018.
url http://repositorio.ufla.br/jspui/handle/1/30241
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal de Lavras
Programa de Pós-Graduação em Ciência e Tecnologia da Madeira
UFLA
brasil
Departamento de Ciências Florestais
publisher.none.fl_str_mv Universidade Federal de Lavras
Programa de Pós-Graduação em Ciência e Tecnologia da Madeira
UFLA
brasil
Departamento de Ciências Florestais
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFLA
instname:Universidade Federal de Lavras (UFLA)
instacron:UFLA
instname_str Universidade Federal de Lavras (UFLA)
instacron_str UFLA
institution UFLA
reponame_str Repositório Institucional da UFLA
collection Repositório Institucional da UFLA
repository.name.fl_str_mv Repositório Institucional da UFLA - Universidade Federal de Lavras (UFLA)
repository.mail.fl_str_mv nivaldo@ufla.br || repositorio.biblioteca@ufla.br
_version_ 1807835098693763072