Projeto de um eletrocardiógrafo emergencial para pacientes com COVID-19

Detalhes bibliográficos
Autor(a) principal: Alonso, Ronaldo Luiz
Data de Publicação: 2022
Tipo de documento: Trabalho de conclusão de curso
Idioma: por
Título da fonte: Biblioteca Digital de Monografias da UFMT
Texto Completo: http://bdm.ufmt.br/handle/1/2760
Resumo: An enormous international effort was made in response to the public health crisis caused by COVID-19, which began in the Chinese city of Wuhan in December 2019. This effort was especially focused on the development of ICU devices, such as oximeters and electrocardiographers for monitoring patients' cardiac electrical activity. To enable their mass manufacture and low cost, it was necessary to simplify these expensive devices while maintaining the barest minimum of capability. Since it is now recognized that COVID-19 not only causes lung problems but also cardiac and brain problems, such as acute myocardial infarction and stroke, this endeavor aims to build an emergency use electrocardiographer for emergency ICUs and the subsequent monitoring of these patients. The newly created electrocardiograph just has a D2 channel and does not need a computer to monitor and record cardiac electrical activity because it is displayed on an Android-powered smartphone's screen. The Arduino, a microcontroller-based plate, is used to record, analogically filter, and digitize the electrocardiographic signal. A mobile phone running the Android operating system receives this signal through a Bluetooth serial module and displays it on the screen. The created device requires a 9V battery, three standard electrodes, disposables for electrocardiograms, and pressure to secure the electrodes to the patient's body. Using this knowledge, medical personnel can quickly identify the patient's heart issues by checking their mobile device.
id UFMT-1_556010b93080db5dd6100e4cff6175d5
oai_identifier_str oai:localhost:1/2760
network_acronym_str UFMT-1
network_name_str Biblioteca Digital de Monografias da UFMT
repository_id_str
spelling Projeto de um eletrocardiógrafo emergencial para pacientes com COVID-19CNPQ::OUTROS::BIOMEDICINAEletrocardiógrafoAmplificador de InstrumentaçãoFiltros ativosFiltros digitais NotchArduínoAppInventorElectrocardiographInstrumentation AmplifierActive filtersNotch digital filtersArduinoAppInventorAn enormous international effort was made in response to the public health crisis caused by COVID-19, which began in the Chinese city of Wuhan in December 2019. This effort was especially focused on the development of ICU devices, such as oximeters and electrocardiographers for monitoring patients' cardiac electrical activity. To enable their mass manufacture and low cost, it was necessary to simplify these expensive devices while maintaining the barest minimum of capability. Since it is now recognized that COVID-19 not only causes lung problems but also cardiac and brain problems, such as acute myocardial infarction and stroke, this endeavor aims to build an emergency use electrocardiographer for emergency ICUs and the subsequent monitoring of these patients. The newly created electrocardiograph just has a D2 channel and does not need a computer to monitor and record cardiac electrical activity because it is displayed on an Android-powered smartphone's screen. The Arduino, a microcontroller-based plate, is used to record, analogically filter, and digitize the electrocardiographic signal. A mobile phone running the Android operating system receives this signal through a Bluetooth serial module and displays it on the screen. The created device requires a 9V battery, three standard electrodes, disposables for electrocardiograms, and pressure to secure the electrodes to the patient's body. Using this knowledge, medical personnel can quickly identify the patient's heart issues by checking their mobile device.Devido à emergência em saúde pública causada pela COVID-19, que teve início na cidade de Wuhan na China em dezembro de 2019, fez-se necessária uma força tarefa para desenvolvimento de dispositivos utilizados em UTI, tais como ventiladores pulmonares, oxímetros e eletrocardiógrafos para monitoração da atividade elétrica cardíaca de pacientes. Por serem aparelhos caros a força tarefa teve como objetivo simplificar esses aparelhos, mantendo o mínimo de funcionalidade para que pudessem ser produzidos em escala e a baixo custo. Este trabalho tem por objetivo o desenvolvimento de um eletrocardiógrafo de uso emergencial para UTIs emergenciais e para o monitoramento posterior destes pacientes, pois é sabido atualmente que a COVID-19 causa, além de complicações pulmonares, também complicações cardíacas e encefálicas, tais como infarto agudo do miocárdio e acidente vascular cerebral. O eletrocardiógrafo desenvolvido possui apenas o canal D2 longo e não necessita de computador para o acompanhamento e monitoramento da atividade elétrica cardíaca, uma vez que é exibida na tela de um celular que executa o sistema ANDROID. O sinal eletrocardiográfico é capturado, filtrado analogicamente e digitalizado usando uma placa baseada no microcontrolador ATMEGA328, denominada placa ARDUÍNO. Esse sinal é enviado através de um módulo serial bluetooth para um celular rodando sistema ANDROID e exibido em tela. Para o funcionamento do aparato desenvolvido necessita-se de uma bateria de 9V e de 3 eletrodos comuns, descartáveis utilizados em eletrocardiograma e esparadrapos para fixar os eletrodos ao corpo do paciente. Com essa informação, os profissionais de saúde podem facilmente detectar anormalidades cardíacas do paciente olhando no seu celular, o gráfico temporal do sinal eletrocardiográfico.Universidade Federal de Mato GrossoBrasilInstituto de Ciências Biológicas e da Saúde (ICBS) – AraguaiaUFMT CUA - AraguaiaBiomedicina - CUAFonseca Filho, Paulo Roberto da2893682941511355http://lattes.cnpq.br/2893682941511355Fonseca Filho, Paulo Roberto da2893682941511355http://lattes.cnpq.br/2893682941511355Giarola, Rodrigo Sanchez5776187710297447http://lattes.cnpq.br/5776187710297447Brune, Maximilian Wilhelm0281243147156534http://lattes.cnpq.br/0281243147156534Alonso, Ronaldo Luiz2022-12-14T10:59:01Z2022-07-242022-12-14T10:59:01Z2022-07-07info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesisinfo:eu-repo/semantics/datasetALONSO, Ronaldo Luiz. Projeto de um eletrocardiógrafo emergencial para pacientes com COVID-19. 2022. 38 f. Monografia (Bacharelado em Biomedicina) - Instituto de Ciências Biológicas e da Saúde, Universidade Federal de Mato Grosso, Barra do Garças, 2022.http://bdm.ufmt.br/handle/1/2760porinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Monografias da UFMTinstname:Universidade Federal de Mato Grosso (UFMT)instacron:UFMT2022-12-16T06:04:57Zoai:localhost:1/2760Biblioteca Digital de Monografiahttps://bdm.ufmt.br/PUBhttp://200.129.241.122/oai/requestopendoar:2022-12-16T06:04:57falseBiblioteca Digital de Monografiahttps://bdm.ufmt.br/PUBhttp://200.129.241.122/oai/requestbibliotecacentral@ufmt.br||opendoar:2022-12-16T06:04:57Biblioteca Digital de Monografias da UFMT - Universidade Federal de Mato Grosso (UFMT)false
dc.title.none.fl_str_mv Projeto de um eletrocardiógrafo emergencial para pacientes com COVID-19
title Projeto de um eletrocardiógrafo emergencial para pacientes com COVID-19
spellingShingle Projeto de um eletrocardiógrafo emergencial para pacientes com COVID-19
Alonso, Ronaldo Luiz
CNPQ::OUTROS::BIOMEDICINA
Eletrocardiógrafo
Amplificador de Instrumentação
Filtros ativos
Filtros digitais Notch
Arduíno
AppInventor
Electrocardiograph
Instrumentation Amplifier
Active filters
Notch digital filters
Arduino
AppInventor
title_short Projeto de um eletrocardiógrafo emergencial para pacientes com COVID-19
title_full Projeto de um eletrocardiógrafo emergencial para pacientes com COVID-19
title_fullStr Projeto de um eletrocardiógrafo emergencial para pacientes com COVID-19
title_full_unstemmed Projeto de um eletrocardiógrafo emergencial para pacientes com COVID-19
title_sort Projeto de um eletrocardiógrafo emergencial para pacientes com COVID-19
author Alonso, Ronaldo Luiz
author_facet Alonso, Ronaldo Luiz
author_role author
dc.contributor.none.fl_str_mv Fonseca Filho, Paulo Roberto da
2893682941511355
http://lattes.cnpq.br/2893682941511355
Fonseca Filho, Paulo Roberto da
2893682941511355
http://lattes.cnpq.br/2893682941511355
Giarola, Rodrigo Sanchez
5776187710297447
http://lattes.cnpq.br/5776187710297447
Brune, Maximilian Wilhelm
0281243147156534
http://lattes.cnpq.br/0281243147156534
dc.contributor.author.fl_str_mv Alonso, Ronaldo Luiz
dc.subject.por.fl_str_mv CNPQ::OUTROS::BIOMEDICINA
Eletrocardiógrafo
Amplificador de Instrumentação
Filtros ativos
Filtros digitais Notch
Arduíno
AppInventor
Electrocardiograph
Instrumentation Amplifier
Active filters
Notch digital filters
Arduino
AppInventor
topic CNPQ::OUTROS::BIOMEDICINA
Eletrocardiógrafo
Amplificador de Instrumentação
Filtros ativos
Filtros digitais Notch
Arduíno
AppInventor
Electrocardiograph
Instrumentation Amplifier
Active filters
Notch digital filters
Arduino
AppInventor
description An enormous international effort was made in response to the public health crisis caused by COVID-19, which began in the Chinese city of Wuhan in December 2019. This effort was especially focused on the development of ICU devices, such as oximeters and electrocardiographers for monitoring patients' cardiac electrical activity. To enable their mass manufacture and low cost, it was necessary to simplify these expensive devices while maintaining the barest minimum of capability. Since it is now recognized that COVID-19 not only causes lung problems but also cardiac and brain problems, such as acute myocardial infarction and stroke, this endeavor aims to build an emergency use electrocardiographer for emergency ICUs and the subsequent monitoring of these patients. The newly created electrocardiograph just has a D2 channel and does not need a computer to monitor and record cardiac electrical activity because it is displayed on an Android-powered smartphone's screen. The Arduino, a microcontroller-based plate, is used to record, analogically filter, and digitize the electrocardiographic signal. A mobile phone running the Android operating system receives this signal through a Bluetooth serial module and displays it on the screen. The created device requires a 9V battery, three standard electrodes, disposables for electrocardiograms, and pressure to secure the electrodes to the patient's body. Using this knowledge, medical personnel can quickly identify the patient's heart issues by checking their mobile device.
publishDate 2022
dc.date.none.fl_str_mv 2022-12-14T10:59:01Z
2022-07-24
2022-12-14T10:59:01Z
2022-07-07
dc.type.driver.fl_str_mv info:eu-repo/semantics/publishedVersion
info:eu-repo/semantics/bachelorThesis
info:eu-repo/semantics/dataset
format bachelorThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv ALONSO, Ronaldo Luiz. Projeto de um eletrocardiógrafo emergencial para pacientes com COVID-19. 2022. 38 f. Monografia (Bacharelado em Biomedicina) - Instituto de Ciências Biológicas e da Saúde, Universidade Federal de Mato Grosso, Barra do Garças, 2022.
http://bdm.ufmt.br/handle/1/2760
identifier_str_mv ALONSO, Ronaldo Luiz. Projeto de um eletrocardiógrafo emergencial para pacientes com COVID-19. 2022. 38 f. Monografia (Bacharelado em Biomedicina) - Instituto de Ciências Biológicas e da Saúde, Universidade Federal de Mato Grosso, Barra do Garças, 2022.
url http://bdm.ufmt.br/handle/1/2760
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.publisher.none.fl_str_mv Universidade Federal de Mato Grosso
Brasil
Instituto de Ciências Biológicas e da Saúde (ICBS) – Araguaia
UFMT CUA - Araguaia
Biomedicina - CUA
publisher.none.fl_str_mv Universidade Federal de Mato Grosso
Brasil
Instituto de Ciências Biológicas e da Saúde (ICBS) – Araguaia
UFMT CUA - Araguaia
Biomedicina - CUA
dc.source.none.fl_str_mv reponame:Biblioteca Digital de Monografias da UFMT
instname:Universidade Federal de Mato Grosso (UFMT)
instacron:UFMT
instname_str Universidade Federal de Mato Grosso (UFMT)
instacron_str UFMT
institution UFMT
reponame_str Biblioteca Digital de Monografias da UFMT
collection Biblioteca Digital de Monografias da UFMT
repository.name.fl_str_mv Biblioteca Digital de Monografias da UFMT - Universidade Federal de Mato Grosso (UFMT)
repository.mail.fl_str_mv bibliotecacentral@ufmt.br||
_version_ 1804658256583327744