Métodos para obtenção da altura e do volume total de árvores em sistema de integração lavoura-pecuária-floresta
Autor(a) principal: | |
---|---|
Data de Publicação: | 2017 |
Tipo de documento: | Trabalho de conclusão de curso |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Monografias da UFMT |
Texto Completo: | http://bdm.ufmt.br/handle/1/777 |
Resumo: | The objective of this work was to evaluate the accuracy of methods for obtaining height and total and partial volume with eucalyptus bark in a crop-livestock-forest integration system (ILPF). The following instruments were tested for height: Vertex IV®, Haglöf® Hypometer / Clinometer, Criterion RD 1000®, Smartphone Measure Height application and Christen's Hypsometer. The efficiency of Criterion RD 1000® (non-destructive method) was tested for total and partial volume shells. Then the same trees measured by the hypsometers and the Criterion were felled (20 trees), and made the rigorous cubage, with trena and suta. We performed mean, Dunnett and t tests for independent samples at 95% probability, for height and volume respectively. Waste analysis and complementary tests were also carried out. There was a difference in the actual height only with the one obtained by the smartphone application. The Criterion RD 1000 obtained best estimate, followed by Vertex and Haglöf respectively, and Christen's hypsometer was more biased. There was statistical equality between the total and partial volumes obtained by the destructive method compared to the non-destructive method, as well as there was equality for the diameters obtained along the shaft. The measurements obtained with the Criterion RD 1000® were presented without tendencies, providing efficient estimates for height and total volume as well as partial in the sections with the highest volumetric concentration, being indicated for such purposes, and consequently for the development of multiproduct equations . |
id |
UFMT-1_799e63b922d33cf554ae5b2ffdc74ffb |
---|---|
oai_identifier_str |
oai:localhost:1/777 |
network_acronym_str |
UFMT-1 |
network_name_str |
Biblioteca Digital de Monografias da UFMT |
repository_id_str |
|
spelling |
Métodos para obtenção da altura e do volume total de árvores em sistema de integração lavoura-pecuária-florestaCNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTALAplicativo para smartphoneCriterion RD 1000CubagemApplication for smartphoneCriterion RD 1000CubingThe objective of this work was to evaluate the accuracy of methods for obtaining height and total and partial volume with eucalyptus bark in a crop-livestock-forest integration system (ILPF). The following instruments were tested for height: Vertex IV®, Haglöf® Hypometer / Clinometer, Criterion RD 1000®, Smartphone Measure Height application and Christen's Hypsometer. The efficiency of Criterion RD 1000® (non-destructive method) was tested for total and partial volume shells. Then the same trees measured by the hypsometers and the Criterion were felled (20 trees), and made the rigorous cubage, with trena and suta. We performed mean, Dunnett and t tests for independent samples at 95% probability, for height and volume respectively. Waste analysis and complementary tests were also carried out. There was a difference in the actual height only with the one obtained by the smartphone application. The Criterion RD 1000 obtained best estimate, followed by Vertex and Haglöf respectively, and Christen's hypsometer was more biased. There was statistical equality between the total and partial volumes obtained by the destructive method compared to the non-destructive method, as well as there was equality for the diameters obtained along the shaft. The measurements obtained with the Criterion RD 1000® were presented without tendencies, providing efficient estimates for height and total volume as well as partial in the sections with the highest volumetric concentration, being indicated for such purposes, and consequently for the development of multiproduct equations .Este trabalho teve como objetivo avaliar a exatidão de métodos para obtenção de altura e volume total e parcial com casca de eucalipto em um sistema de Integração Lavoura-PecuáriaFloresta (ILPF). Foram testados os seguintes instrumentos para obtenção de altura: Vertex IV ® , Hipsômetro/Clinômetro Haglöf ® , Criterion RD 1000 ® , aplicativo para Smartphone Measure Height e o Hipsômetro de Christen. Para estimativas de volume total e parcial com casca testouse a eficiência do Criterion RD 1000 ® (método não destrutivo). Em seguida as mesmas árvores mensuradas pelos hipsômetros e pelo Criterion foram abatidas (20 árvores), e feita a cubagem rigorosa, com trena e suta. Realizou-se testes de média, Dunnett e t para amostras independentes a 95% de probabilidade, para altura e volume respectivamente. Análises de resíduos e testes complementares também foram realizados. Verificou-se diferença da altura real apenas com a obtida pelo aplicativo para smartphone. O Criterion RD 1000 obteve melhor estimativa, seguido pelo Vertex e Haglöf respectivamente, e o hipsômetro de Christen se mostrou mais tendencioso. Houve igualdade estatística entre os volumes totais e parciais obtidos pelo método destrutivo comparado com o método não destrutivo, assim como houve igualdade para os diâmetros obtidos ao longo do fuste. As medições obtidas com o Criterion RD 1000® apresentaram-se sem tendências, fornecendo estimativas eficientes, para a altura e volume total, bem como parcial nas seções de maior concentração volumétrica, sendo indicado para tais finalidades, e consequentemente para desenvolvimento de equações de multiprodutos.Universidade Federal de Mato GrossoBrasilInstituto de Ciências Agrárias e Ambientais (ICAA) – SinopUFMT CUS - SinopEngenharia Florestal - CUSCurto, Rafaella de Angelihttp://lattes.cnpq.br/7493748713385803Curto, Rafaella de Angelihttp://lattes.cnpq.br/7493748713385803Lauro, Aline Cristina2019-03-28T14:19:50Z2017-12-122019-03-28T14:19:50Z2017-11-24info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesisinfo:eu-repo/semantics/datasetLAURO, Aline Cristina. Métodos para obtenção da altura e do volume total de árvores em sistema de integração lavoura-pecuária-floresta. 2017. 55f. Trabalho de Conclusão de Curso (Graduação em Engenharia Florestal) – Universidade Federal de Mato Grosso, Instituto de Ciências Agrárias e Ambientais, Sinop, 2017.http://bdm.ufmt.br/handle/1/777porinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Monografias da UFMTinstname:Universidade Federal de Mato Grosso (UFMT)instacron:UFMT2019-03-30T07:00:49Zoai:localhost:1/777Biblioteca Digital de Monografiahttps://bdm.ufmt.br/PUBhttp://200.129.241.122/oai/requestopendoar:2019-03-30T07:00:49falseBiblioteca Digital de Monografiahttps://bdm.ufmt.br/PUBhttp://200.129.241.122/oai/requestbibliotecacentral@ufmt.br||opendoar:2019-03-30T07:00:49Biblioteca Digital de Monografias da UFMT - Universidade Federal de Mato Grosso (UFMT)false |
dc.title.none.fl_str_mv |
Métodos para obtenção da altura e do volume total de árvores em sistema de integração lavoura-pecuária-floresta |
title |
Métodos para obtenção da altura e do volume total de árvores em sistema de integração lavoura-pecuária-floresta |
spellingShingle |
Métodos para obtenção da altura e do volume total de árvores em sistema de integração lavoura-pecuária-floresta Lauro, Aline Cristina CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL Aplicativo para smartphone Criterion RD 1000 Cubagem Application for smartphone Criterion RD 1000 Cubing |
title_short |
Métodos para obtenção da altura e do volume total de árvores em sistema de integração lavoura-pecuária-floresta |
title_full |
Métodos para obtenção da altura e do volume total de árvores em sistema de integração lavoura-pecuária-floresta |
title_fullStr |
Métodos para obtenção da altura e do volume total de árvores em sistema de integração lavoura-pecuária-floresta |
title_full_unstemmed |
Métodos para obtenção da altura e do volume total de árvores em sistema de integração lavoura-pecuária-floresta |
title_sort |
Métodos para obtenção da altura e do volume total de árvores em sistema de integração lavoura-pecuária-floresta |
author |
Lauro, Aline Cristina |
author_facet |
Lauro, Aline Cristina |
author_role |
author |
dc.contributor.none.fl_str_mv |
Curto, Rafaella de Angeli http://lattes.cnpq.br/7493748713385803 Curto, Rafaella de Angeli http://lattes.cnpq.br/7493748713385803 |
dc.contributor.author.fl_str_mv |
Lauro, Aline Cristina |
dc.subject.por.fl_str_mv |
CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL Aplicativo para smartphone Criterion RD 1000 Cubagem Application for smartphone Criterion RD 1000 Cubing |
topic |
CNPQ::CIENCIAS AGRARIAS::RECURSOS FLORESTAIS E ENGENHARIA FLORESTAL Aplicativo para smartphone Criterion RD 1000 Cubagem Application for smartphone Criterion RD 1000 Cubing |
description |
The objective of this work was to evaluate the accuracy of methods for obtaining height and total and partial volume with eucalyptus bark in a crop-livestock-forest integration system (ILPF). The following instruments were tested for height: Vertex IV®, Haglöf® Hypometer / Clinometer, Criterion RD 1000®, Smartphone Measure Height application and Christen's Hypsometer. The efficiency of Criterion RD 1000® (non-destructive method) was tested for total and partial volume shells. Then the same trees measured by the hypsometers and the Criterion were felled (20 trees), and made the rigorous cubage, with trena and suta. We performed mean, Dunnett and t tests for independent samples at 95% probability, for height and volume respectively. Waste analysis and complementary tests were also carried out. There was a difference in the actual height only with the one obtained by the smartphone application. The Criterion RD 1000 obtained best estimate, followed by Vertex and Haglöf respectively, and Christen's hypsometer was more biased. There was statistical equality between the total and partial volumes obtained by the destructive method compared to the non-destructive method, as well as there was equality for the diameters obtained along the shaft. The measurements obtained with the Criterion RD 1000® were presented without tendencies, providing efficient estimates for height and total volume as well as partial in the sections with the highest volumetric concentration, being indicated for such purposes, and consequently for the development of multiproduct equations . |
publishDate |
2017 |
dc.date.none.fl_str_mv |
2017-12-12 2017-11-24 2019-03-28T14:19:50Z 2019-03-28T14:19:50Z |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/publishedVersion info:eu-repo/semantics/bachelorThesis info:eu-repo/semantics/dataset |
format |
bachelorThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
LAURO, Aline Cristina. Métodos para obtenção da altura e do volume total de árvores em sistema de integração lavoura-pecuária-floresta. 2017. 55f. Trabalho de Conclusão de Curso (Graduação em Engenharia Florestal) – Universidade Federal de Mato Grosso, Instituto de Ciências Agrárias e Ambientais, Sinop, 2017. http://bdm.ufmt.br/handle/1/777 |
identifier_str_mv |
LAURO, Aline Cristina. Métodos para obtenção da altura e do volume total de árvores em sistema de integração lavoura-pecuária-floresta. 2017. 55f. Trabalho de Conclusão de Curso (Graduação em Engenharia Florestal) – Universidade Federal de Mato Grosso, Instituto de Ciências Agrárias e Ambientais, Sinop, 2017. |
url |
http://bdm.ufmt.br/handle/1/777 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.publisher.none.fl_str_mv |
Universidade Federal de Mato Grosso Brasil Instituto de Ciências Agrárias e Ambientais (ICAA) – Sinop UFMT CUS - Sinop Engenharia Florestal - CUS |
publisher.none.fl_str_mv |
Universidade Federal de Mato Grosso Brasil Instituto de Ciências Agrárias e Ambientais (ICAA) – Sinop UFMT CUS - Sinop Engenharia Florestal - CUS |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Monografias da UFMT instname:Universidade Federal de Mato Grosso (UFMT) instacron:UFMT |
instname_str |
Universidade Federal de Mato Grosso (UFMT) |
instacron_str |
UFMT |
institution |
UFMT |
reponame_str |
Biblioteca Digital de Monografias da UFMT |
collection |
Biblioteca Digital de Monografias da UFMT |
repository.name.fl_str_mv |
Biblioteca Digital de Monografias da UFMT - Universidade Federal de Mato Grosso (UFMT) |
repository.mail.fl_str_mv |
bibliotecacentral@ufmt.br|| |
_version_ |
1804658242499903488 |