Avaliação da deposição de gotas em pulverização utilizando-se de diferentes adjuvantes
Autor(a) principal: | |
---|---|
Data de Publicação: | 2017 |
Tipo de documento: | Trabalho de conclusão de curso |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Monografias da UFMT |
Texto Completo: | http://bdm.ufmt.br/handle/1/1266 |
Resumo: | The work verified the interference of the use of adjuvant, including an alternative product in the deposition of pockets and the efficiency of the cover. It was conducted without Agricultural Machines and Mechanization Laboratory of the Federal University of Mato Grosso, Sinop Campus, using a 600L agricultural tractor and sprayer Equipped with flat and conical jet tips (110 02). Two commercial adjuvants, in two doses each (according to package insert), and an alternative product containing anionic surfactant (surface tension reducer) in four doses, and the control composed only of water were evaluated. A slurry volume of 120 L ha-1was used to obtain the deposition, water-sensitive papers positioned 0.5 m below the application bar were placed in each of the 4 sections of the sprayer. The parameters were: volumetric diameter of droplets, numerical median diameter, relative amplitude, droplet density and coverage. The results obtained were the coverage rate varied from 20.56 to 23.95%, the relative amplitude showed a percentage with values between 0.88 to 1.12; the droplet density ranged from 136 to 296 cm-2 drops, the mean volume diameter of the treatments ranged from 150 to 195 μm. The number median diameter ranged from 385 to 524 μm. The alternative product, in some parameters, pointed out surprising responses in some of its doses with respect to the quality of drops. Aureo was the treatment that gave the best response to the others, with an expressive coefficient of homogenization (CH). |
id |
UFMT-1_ef7fc228d5470155e4468fe24e7289f2 |
---|---|
oai_identifier_str |
oai:localhost:1/1266 |
network_acronym_str |
UFMT-1 |
network_name_str |
Biblioteca Digital de Monografias da UFMT |
repository_id_str |
|
spelling |
Avaliação da deposição de gotas em pulverização utilizando-se de diferentes adjuvantesCNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLAAdjuvante alternativoEficiência de coberturaTecnologia de aplicaçãoApplication technologyAlternative adjuvantCoverage efficiencyThe work verified the interference of the use of adjuvant, including an alternative product in the deposition of pockets and the efficiency of the cover. It was conducted without Agricultural Machines and Mechanization Laboratory of the Federal University of Mato Grosso, Sinop Campus, using a 600L agricultural tractor and sprayer Equipped with flat and conical jet tips (110 02). Two commercial adjuvants, in two doses each (according to package insert), and an alternative product containing anionic surfactant (surface tension reducer) in four doses, and the control composed only of water were evaluated. A slurry volume of 120 L ha-1was used to obtain the deposition, water-sensitive papers positioned 0.5 m below the application bar were placed in each of the 4 sections of the sprayer. The parameters were: volumetric diameter of droplets, numerical median diameter, relative amplitude, droplet density and coverage. The results obtained were the coverage rate varied from 20.56 to 23.95%, the relative amplitude showed a percentage with values between 0.88 to 1.12; the droplet density ranged from 136 to 296 cm-2 drops, the mean volume diameter of the treatments ranged from 150 to 195 μm. The number median diameter ranged from 385 to 524 μm. The alternative product, in some parameters, pointed out surprising responses in some of its doses with respect to the quality of drops. Aureo was the treatment that gave the best response to the others, with an expressive coefficient of homogenization (CH).O trabalho verificou a interferência do uso de adjuvantes, incluindo um produto alternativo na deposição de gotas e na eficiência de cobertura. Ele foi conduzido no laboratório de Máquinas e Mecanização Agrícola da Universidade Federal de Mato Grosso, Campus de Sinop, utilizando-se de um conjunto trator agrícola e pulverizador de 600 litros equipado com pontas de jato plano (110 02). Foram avaliados dois adjuvantes comerciais em duas doses cada um (conforme bula do produto), e um produto alternativo contendo ingrediente tensoativo aniônico (redutor de tensão superficial) em quatro doses, e a testemunha composta apenas por água. Um volume de calda de 120 L ha-1foi utilizado para obter a deposição, colocaram-se papéis sensíveis à água posicionados a 0,5 m abaixo da barra de aplicação em cada uma das 4 secções do pulverizador. Avaliou-se os parâmetros: diâmetro volumétrico de gotas, diâmetro mediano numérico, amplitude relativa, densidade de gotas e cobertura. Os resultados obtidos foram a taxa de cobertura variou de 20,56 a 23,95 %, a amplitude relativa mostrou um percentual com valores entre 0,88 a 1,12; a densidade de gotas variou entre 136 a 296 gotas cm-2, o diâmetro médio volumétrico dos tratamentos teve valores que oscilaram entre 150 e 195 µm. O diâmetro mediano numérico ficou oscilando entre 385 a 524 µm. O produto alternativo, em alguns parâmetros, apontou respostas surpreendentes em algumas de suas doses com relação a qualidade de gotas. O Aureo obteve melhor resposta frente aos demais, com expressivo valor de coeficiente de homogeneização (CH).Universidade Federal de Mato GrossoBrasilInstituto de Ciências Agrárias e Ambientais (ICAA) – SinopUFMT CUS - SinopEngenharia Agrícola e Ambiental - CUSFiorese, Diego Augustohttp://lattes.cnpq.br/9485787464028848Fiorese, Diego Augustohttp://lattes.cnpq.br/9485787464028848Machado, Thiago Martinshttp://lattes.cnpq.br/6301014615405943Olini , Rogerio de MeloEspírito Santo, André Luís do2019-07-09T12:14:01Z2017-12-122019-07-09T12:14:01Z2017-11-21info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/bachelorThesisinfo:eu-repo/semantics/datasetESPÍRITO SANTO, André Luís do. Avaliação da deposição de gotas em pulverização utilizando-se de diferentes adjuvantes. 2017. 52f. Trabalho de Conclusão de Curso (Graduação em Engenharia Agrícola e Ambiental) – Universidade Federal de Mato Grosso, Instituto de Ciências Agrárias e Ambientais, Sinop, 2017.http://bdm.ufmt.br/handle/1/1266porinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Monografias da UFMTinstname:Universidade Federal de Mato Grosso (UFMT)instacron:UFMT2019-07-10T07:00:55Zoai:localhost:1/1266Biblioteca Digital de Monografiahttps://bdm.ufmt.br/PUBhttp://200.129.241.122/oai/requestopendoar:2019-07-10T07:00:55falseBiblioteca Digital de Monografiahttps://bdm.ufmt.br/PUBhttp://200.129.241.122/oai/requestbibliotecacentral@ufmt.br||opendoar:2019-07-10T07:00:55Biblioteca Digital de Monografias da UFMT - Universidade Federal de Mato Grosso (UFMT)false |
dc.title.none.fl_str_mv |
Avaliação da deposição de gotas em pulverização utilizando-se de diferentes adjuvantes |
title |
Avaliação da deposição de gotas em pulverização utilizando-se de diferentes adjuvantes |
spellingShingle |
Avaliação da deposição de gotas em pulverização utilizando-se de diferentes adjuvantes Espírito Santo, André Luís do CNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA Adjuvante alternativo Eficiência de cobertura Tecnologia de aplicação Application technology Alternative adjuvant Coverage efficiency |
title_short |
Avaliação da deposição de gotas em pulverização utilizando-se de diferentes adjuvantes |
title_full |
Avaliação da deposição de gotas em pulverização utilizando-se de diferentes adjuvantes |
title_fullStr |
Avaliação da deposição de gotas em pulverização utilizando-se de diferentes adjuvantes |
title_full_unstemmed |
Avaliação da deposição de gotas em pulverização utilizando-se de diferentes adjuvantes |
title_sort |
Avaliação da deposição de gotas em pulverização utilizando-se de diferentes adjuvantes |
author |
Espírito Santo, André Luís do |
author_facet |
Espírito Santo, André Luís do |
author_role |
author |
dc.contributor.none.fl_str_mv |
Fiorese, Diego Augusto http://lattes.cnpq.br/9485787464028848 Fiorese, Diego Augusto http://lattes.cnpq.br/9485787464028848 Machado, Thiago Martins http://lattes.cnpq.br/6301014615405943 Olini , Rogerio de Melo |
dc.contributor.author.fl_str_mv |
Espírito Santo, André Luís do |
dc.subject.por.fl_str_mv |
CNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA Adjuvante alternativo Eficiência de cobertura Tecnologia de aplicação Application technology Alternative adjuvant Coverage efficiency |
topic |
CNPQ::CIENCIAS AGRARIAS::ENGENHARIA AGRICOLA Adjuvante alternativo Eficiência de cobertura Tecnologia de aplicação Application technology Alternative adjuvant Coverage efficiency |
description |
The work verified the interference of the use of adjuvant, including an alternative product in the deposition of pockets and the efficiency of the cover. It was conducted without Agricultural Machines and Mechanization Laboratory of the Federal University of Mato Grosso, Sinop Campus, using a 600L agricultural tractor and sprayer Equipped with flat and conical jet tips (110 02). Two commercial adjuvants, in two doses each (according to package insert), and an alternative product containing anionic surfactant (surface tension reducer) in four doses, and the control composed only of water were evaluated. A slurry volume of 120 L ha-1was used to obtain the deposition, water-sensitive papers positioned 0.5 m below the application bar were placed in each of the 4 sections of the sprayer. The parameters were: volumetric diameter of droplets, numerical median diameter, relative amplitude, droplet density and coverage. The results obtained were the coverage rate varied from 20.56 to 23.95%, the relative amplitude showed a percentage with values between 0.88 to 1.12; the droplet density ranged from 136 to 296 cm-2 drops, the mean volume diameter of the treatments ranged from 150 to 195 μm. The number median diameter ranged from 385 to 524 μm. The alternative product, in some parameters, pointed out surprising responses in some of its doses with respect to the quality of drops. Aureo was the treatment that gave the best response to the others, with an expressive coefficient of homogenization (CH). |
publishDate |
2017 |
dc.date.none.fl_str_mv |
2017-12-12 2017-11-21 2019-07-09T12:14:01Z 2019-07-09T12:14:01Z |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/publishedVersion info:eu-repo/semantics/bachelorThesis info:eu-repo/semantics/dataset |
format |
bachelorThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
ESPÍRITO SANTO, André Luís do. Avaliação da deposição de gotas em pulverização utilizando-se de diferentes adjuvantes. 2017. 52f. Trabalho de Conclusão de Curso (Graduação em Engenharia Agrícola e Ambiental) – Universidade Federal de Mato Grosso, Instituto de Ciências Agrárias e Ambientais, Sinop, 2017. http://bdm.ufmt.br/handle/1/1266 |
identifier_str_mv |
ESPÍRITO SANTO, André Luís do. Avaliação da deposição de gotas em pulverização utilizando-se de diferentes adjuvantes. 2017. 52f. Trabalho de Conclusão de Curso (Graduação em Engenharia Agrícola e Ambiental) – Universidade Federal de Mato Grosso, Instituto de Ciências Agrárias e Ambientais, Sinop, 2017. |
url |
http://bdm.ufmt.br/handle/1/1266 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.publisher.none.fl_str_mv |
Universidade Federal de Mato Grosso Brasil Instituto de Ciências Agrárias e Ambientais (ICAA) – Sinop UFMT CUS - Sinop Engenharia Agrícola e Ambiental - CUS |
publisher.none.fl_str_mv |
Universidade Federal de Mato Grosso Brasil Instituto de Ciências Agrárias e Ambientais (ICAA) – Sinop UFMT CUS - Sinop Engenharia Agrícola e Ambiental - CUS |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Monografias da UFMT instname:Universidade Federal de Mato Grosso (UFMT) instacron:UFMT |
instname_str |
Universidade Federal de Mato Grosso (UFMT) |
instacron_str |
UFMT |
institution |
UFMT |
reponame_str |
Biblioteca Digital de Monografias da UFMT |
collection |
Biblioteca Digital de Monografias da UFMT |
repository.name.fl_str_mv |
Biblioteca Digital de Monografias da UFMT - Universidade Federal de Mato Grosso (UFMT) |
repository.mail.fl_str_mv |
bibliotecacentral@ufmt.br|| |
_version_ |
1804658245150703616 |