Influence of grinding on the pozzolanic activity of granite residue.

• Autor(a) principal: Barbosa, Jairo Mendes
• Data de Publicação: 2019
• Outros Autores: Carvalho, José Maria Franco de, Silva, Keoma Defáveri do Carmo e, Peixoto, Ricardo André Fiorotti, Silva, Guilherme Jorge Brigolini
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Institucional da UFOP
• Texto Completo: http://www.repositorio.ufop.br/handle/123456789/12412; https://doi.org/10.1590/0370-44672019720004
• topic: Supplementary cementitious materials

This study explores the potential of the granite residue to be applied as a supplementary cementitious material. Furthermore, the efficiency of grinding methods in the improvement of the residue reactivity was also evaluated. The granite residue was collected in a facility located in Brazil and used as a Portland cement replacement with a substitution rate of 25% in mass. The residue was submitted to wet, dry and additive dry grinding methods, with several different times. The cement-based composites were characterized by quantitative X-Ray diffraction using the Rietveld's method, thermogravimetric analysis, and compressive strength. In conclusion, there was observed a higher efficiency of the wet grinding method, followed by an increase in compressive strength results as grinding time increased. Furthermore, the portlandite content was lower in the cement-based composite with granite residue, especially in the samples ground for 60, 120, and 180 minutes; a fact that summed up with other results for the pozzolanic potential of the granite residue.