Soluble Microbial Product (SMP) characterization in bench-scale aerobic and anaerobic CSTRS under different operational conditions.

Detalhes bibliográficos
Autor(a) principal: Mesquita, Patrícia da Luz
Data de Publicação: 2010
Outros Autores: Aquino, Sergio Francisco de, Xavier, Amália Luísa Pedrosa, Silva, Júlio César Cardoso da, Afonso, Robson José de Cássia Franco
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UFOP
Texto Completo: http://www.repositorio.ufop.br/handle/123456789/6173
http://dx.doi.org/10.1590/S0104-66322010000100009
Resumo: This work presents results on the production and characterization (by both mass spectrometry and conventional chemical analyses) of Soluble Microbial Products (SMP) that accumulated in aerobic and anaerobic bench scale completely stirred tank reactors (CSTRs) fed with glucose or acetate under different hydraulic retention times (HRT) and temperatures. SMP accumulation varied from 2 to 68% of the influent COD in the aerobic reactor and from 9 to 27% in the anaerobic reactor and increased with the decrease in temperature and with the HRT reduction in the aerobic reactor. On the other hand, in the anaerobic reactor, the organic loading rate and the temperature had little impact on SMP production, implying that the SMP originated from different mechanisms in each system. For both reactors, a higher accumulation of SMPs was observed as the substrate was acetate when compared to glucose, and the chemical analysis showed that the majority of the SMP did not seem to be proteins or carbohydrates. Principal component analysis (PCA) of the mass spectra from positive and negative mode electron-spray ionization (LC-IT-TOF-MS) and results from matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF-MS) confirmed the chemical analyses and showed the absence of proteins in the effluents and the predominance of low molecular weight SMP. The PCA analysis also showed that the majority of the SMP from aerobic and anaerobic reactors did not seem to originate from soluble extracellular polymeric substances (EPS) or cell lysis products. Keywords: Biological wastewater treatment; Soluble microbial products; Residual COD; Volatile fatty acids; mass spectrometry
id UFOP_db70e6c4166dc77f6eb315a1cee1add2
oai_identifier_str oai:repositorio.ufop.br:123456789/6173
network_acronym_str UFOP
network_name_str Repositório Institucional da UFOP
repository_id_str 3233
spelling Soluble Microbial Product (SMP) characterization in bench-scale aerobic and anaerobic CSTRS under different operational conditions.This work presents results on the production and characterization (by both mass spectrometry and conventional chemical analyses) of Soluble Microbial Products (SMP) that accumulated in aerobic and anaerobic bench scale completely stirred tank reactors (CSTRs) fed with glucose or acetate under different hydraulic retention times (HRT) and temperatures. SMP accumulation varied from 2 to 68% of the influent COD in the aerobic reactor and from 9 to 27% in the anaerobic reactor and increased with the decrease in temperature and with the HRT reduction in the aerobic reactor. On the other hand, in the anaerobic reactor, the organic loading rate and the temperature had little impact on SMP production, implying that the SMP originated from different mechanisms in each system. For both reactors, a higher accumulation of SMPs was observed as the substrate was acetate when compared to glucose, and the chemical analysis showed that the majority of the SMP did not seem to be proteins or carbohydrates. Principal component analysis (PCA) of the mass spectra from positive and negative mode electron-spray ionization (LC-IT-TOF-MS) and results from matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF-MS) confirmed the chemical analyses and showed the absence of proteins in the effluents and the predominance of low molecular weight SMP. The PCA analysis also showed that the majority of the SMP from aerobic and anaerobic reactors did not seem to originate from soluble extracellular polymeric substances (EPS) or cell lysis products. Keywords: Biological wastewater treatment; Soluble microbial products; Residual COD; Volatile fatty acids; mass spectrometry2016-01-21T11:52:58Z2016-01-21T11:52:58Z2010info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/articleapplication/pdfMESQUITA, P. da L. et al. Soluble Microbial Product (SMP) characterization in bench-scale aerobic and anaerobic CSTRS under different operational conditions. Brazilian Journal of Chemical Engineering, v. 27, p. 101-111, 2010. Disponível em: <http://www.scielo.br/pdf/bjce/v27n1/a09v27n1.pdf>. Acesso em: 21 out. 2015.0104-6632http://www.repositorio.ufop.br/handle/123456789/6173http://dx.doi.org/10.1590/S0104-66322010000100009Todo o conteúdo do periódico Brazilian Journal of Chemical Engineering, exceto onde identificado, está sob uma licença Creative Commons que permite copiar, distribuir e transmitir o trabalho em qualquer suporte ou formato desde que sejam citados o autor e o licenciante. Não permite o uso para fins comerciais. Fonte: Brazilian Journal of Chemical Engineering <http://www.scielo.br/scielo.php?script=sci_serial&pid=0104-6632&lng=en&nrm=iso>. Acesso em: 20 ago. 2019.info:eu-repo/semantics/openAccessMesquita, Patrícia da LuzAquino, Sergio Francisco deXavier, Amália Luísa PedrosaSilva, Júlio César Cardoso daAfonso, Robson José de Cássia Francoengreponame:Repositório Institucional da UFOPinstname:Universidade Federal de Ouro Preto (UFOP)instacron:UFOP2019-08-27T17:44:50Zoai:repositorio.ufop.br:123456789/6173Repositório InstitucionalPUBhttp://www.repositorio.ufop.br/oai/requestrepositorio@ufop.edu.bropendoar:32332019-08-27T17:44:50Repositório Institucional da UFOP - Universidade Federal de Ouro Preto (UFOP)false
dc.title.none.fl_str_mv Soluble Microbial Product (SMP) characterization in bench-scale aerobic and anaerobic CSTRS under different operational conditions.
title Soluble Microbial Product (SMP) characterization in bench-scale aerobic and anaerobic CSTRS under different operational conditions.
spellingShingle Soluble Microbial Product (SMP) characterization in bench-scale aerobic and anaerobic CSTRS under different operational conditions.
Mesquita, Patrícia da Luz
title_short Soluble Microbial Product (SMP) characterization in bench-scale aerobic and anaerobic CSTRS under different operational conditions.
title_full Soluble Microbial Product (SMP) characterization in bench-scale aerobic and anaerobic CSTRS under different operational conditions.
title_fullStr Soluble Microbial Product (SMP) characterization in bench-scale aerobic and anaerobic CSTRS under different operational conditions.
title_full_unstemmed Soluble Microbial Product (SMP) characterization in bench-scale aerobic and anaerobic CSTRS under different operational conditions.
title_sort Soluble Microbial Product (SMP) characterization in bench-scale aerobic and anaerobic CSTRS under different operational conditions.
author Mesquita, Patrícia da Luz
author_facet Mesquita, Patrícia da Luz
Aquino, Sergio Francisco de
Xavier, Amália Luísa Pedrosa
Silva, Júlio César Cardoso da
Afonso, Robson José de Cássia Franco
author_role author
author2 Aquino, Sergio Francisco de
Xavier, Amália Luísa Pedrosa
Silva, Júlio César Cardoso da
Afonso, Robson José de Cássia Franco
author2_role author
author
author
author
dc.contributor.author.fl_str_mv Mesquita, Patrícia da Luz
Aquino, Sergio Francisco de
Xavier, Amália Luísa Pedrosa
Silva, Júlio César Cardoso da
Afonso, Robson José de Cássia Franco
description This work presents results on the production and characterization (by both mass spectrometry and conventional chemical analyses) of Soluble Microbial Products (SMP) that accumulated in aerobic and anaerobic bench scale completely stirred tank reactors (CSTRs) fed with glucose or acetate under different hydraulic retention times (HRT) and temperatures. SMP accumulation varied from 2 to 68% of the influent COD in the aerobic reactor and from 9 to 27% in the anaerobic reactor and increased with the decrease in temperature and with the HRT reduction in the aerobic reactor. On the other hand, in the anaerobic reactor, the organic loading rate and the temperature had little impact on SMP production, implying that the SMP originated from different mechanisms in each system. For both reactors, a higher accumulation of SMPs was observed as the substrate was acetate when compared to glucose, and the chemical analysis showed that the majority of the SMP did not seem to be proteins or carbohydrates. Principal component analysis (PCA) of the mass spectra from positive and negative mode electron-spray ionization (LC-IT-TOF-MS) and results from matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF-MS) confirmed the chemical analyses and showed the absence of proteins in the effluents and the predominance of low molecular weight SMP. The PCA analysis also showed that the majority of the SMP from aerobic and anaerobic reactors did not seem to originate from soluble extracellular polymeric substances (EPS) or cell lysis products. Keywords: Biological wastewater treatment; Soluble microbial products; Residual COD; Volatile fatty acids; mass spectrometry
publishDate 2010
dc.date.none.fl_str_mv 2010
2016-01-21T11:52:58Z
2016-01-21T11:52:58Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv MESQUITA, P. da L. et al. Soluble Microbial Product (SMP) characterization in bench-scale aerobic and anaerobic CSTRS under different operational conditions. Brazilian Journal of Chemical Engineering, v. 27, p. 101-111, 2010. Disponível em: <http://www.scielo.br/pdf/bjce/v27n1/a09v27n1.pdf>. Acesso em: 21 out. 2015.
0104-6632
http://www.repositorio.ufop.br/handle/123456789/6173
http://dx.doi.org/10.1590/S0104-66322010000100009
identifier_str_mv MESQUITA, P. da L. et al. Soluble Microbial Product (SMP) characterization in bench-scale aerobic and anaerobic CSTRS under different operational conditions. Brazilian Journal of Chemical Engineering, v. 27, p. 101-111, 2010. Disponível em: <http://www.scielo.br/pdf/bjce/v27n1/a09v27n1.pdf>. Acesso em: 21 out. 2015.
0104-6632
url http://www.repositorio.ufop.br/handle/123456789/6173
http://dx.doi.org/10.1590/S0104-66322010000100009
dc.language.iso.fl_str_mv eng
language eng
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFOP
instname:Universidade Federal de Ouro Preto (UFOP)
instacron:UFOP
instname_str Universidade Federal de Ouro Preto (UFOP)
instacron_str UFOP
institution UFOP
reponame_str Repositório Institucional da UFOP
collection Repositório Institucional da UFOP
repository.name.fl_str_mv Repositório Institucional da UFOP - Universidade Federal de Ouro Preto (UFOP)
repository.mail.fl_str_mv repositorio@ufop.edu.br
_version_ 1813002852075831296