Testes modais utilizando martelo instrumentado em estruturas de baixas freqüências naturais
Autor(a) principal: | |
---|---|
Data de Publicação: | 2006 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UFPB |
Texto Completo: | https://repositorio.ufpb.br/jspui/handle/tede/5322 |
Resumo: | In this work it is discussed the improvement in the modal test for obtaining the Frequency Response Function (FRF) in low natural frequency structures by using as exciter an instrumented hammer. There are two conflicting needs in this kind of test: on the one hand, the low natural frequencies of the structure, which are usually associated with low damping, demand long acquisition time so that good resolution in the spectrum may exist. On the other hand, the sampling rate must be increased to correctly catch the short duration signal of the hammer. This leads to an elevated number of points in the signal to be acquired, and there may eventually be limitation on such number of points when using spectrum analyzers in the acquisition and obtaining of the FRFs. Thus, in this work, the selective decimation technique explored for the improvement of the test. The work includes the construction of a prototype with two degrees of freedom (S2GL) to serve as case study for the tests enabling the theoretical and experimental Frequency Response Functions (FRF) to be compared, as well as adjusting the parameters of the model. The MATLAB programming language was used for obtaining the FRFs. The efficiency of the improvement applied was verified through the frequency spectra, in which it was observed significant resemblance between the non-decimated FRF with the acquisition having a high number of points, and the decimated FRF with smaller number of points and selected so that it could preserve the correct detection of the hammer signal. |
id |
UFPB_2bca7266f3f6b3cc253a594291203c6e |
---|---|
oai_identifier_str |
oai:repositorio.ufpb.br:tede/5322 |
network_acronym_str |
UFPB |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository_id_str |
|
spelling |
Testes modais utilizando martelo instrumentado em estruturas de baixas freqüências naturaisModal test in low natural frequency structures by using as exciter an instrumented hammerVibraçãoAnálise ModalFunção Resposta em FreqüênciaDecimaçãoVibrationModal AnalysisFrequency Response FunctionDecimationCNPQ::ENGENHARIAS::ENGENHARIA MECANICAIn this work it is discussed the improvement in the modal test for obtaining the Frequency Response Function (FRF) in low natural frequency structures by using as exciter an instrumented hammer. There are two conflicting needs in this kind of test: on the one hand, the low natural frequencies of the structure, which are usually associated with low damping, demand long acquisition time so that good resolution in the spectrum may exist. On the other hand, the sampling rate must be increased to correctly catch the short duration signal of the hammer. This leads to an elevated number of points in the signal to be acquired, and there may eventually be limitation on such number of points when using spectrum analyzers in the acquisition and obtaining of the FRFs. Thus, in this work, the selective decimation technique explored for the improvement of the test. The work includes the construction of a prototype with two degrees of freedom (S2GL) to serve as case study for the tests enabling the theoretical and experimental Frequency Response Functions (FRF) to be compared, as well as adjusting the parameters of the model. The MATLAB programming language was used for obtaining the FRFs. The efficiency of the improvement applied was verified through the frequency spectra, in which it was observed significant resemblance between the non-decimated FRF with the acquisition having a high number of points, and the decimated FRF with smaller number of points and selected so that it could preserve the correct detection of the hammer signal.Coordenação de Aperfeiçoamento de Pessoal de Nível SuperiorNeste trabalho discute-se o aprimoramento do teste modal para obtenção da Função Resposta em Freqüência (FRF) em estruturas de baixas freqüências naturais utilizando como excitador um martelo instrumentado. Há duas necessidades conflitantes neste tipo de teste: de um lado, as baixas freqüências naturais da estrutura, usualmente associadas com baixo amortecimento, requerem um tempo longo de aquisição para haver boa resolução no espectro. Por outro lado, a taxa de amostragem deve ser elevada para captar corretamente o sinal de curta duração do martelo. Isto leva a um número elevado de pontos no sinal a ser adquirido, havendo eventualmente limitação de tal número de pontos ao se utilizar analisadores de espectro na aquisição e obtenção das FRFs. Neste sentido, neste trabalho foi explorada a técnica de decimação seletiva para aprimoramento do teste. O trabalho inclui a construção de um protótipo com dois Graus de Liberdade (S2GL) para servir como objeto de estudo para os testes deste aprimoramento, permitindo assim, comparar as Funções Resposta em Freqüências (FRF) teóricas e experimentais, bem como ajustar os parâmetros do modelo. Utilizou-se da linguagem de programação MATLAB® para a obtenção das FRFs. A eficiência do aprimoramento empregado foi verificada através dos espectros de freqüência, onde observou-se uma significativa similaridade entre a FRF não decimada com a aquisição possuindo um número elevado de pontos e a FRF decimada com menor número de pontos e selecionada de modo a preservar a correta detecção do sinal do martelo.Universidade Federal da ParaíbaBREngenharia MecânicaPrograma de Pós Graduação em Engenharia MecânicaUFPBPimentel, Roberto Lealhttp://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783854PLima, Michelline Nery Azevedo2015-05-08T14:59:36Z2018-07-21T00:03:30Z2009-10-202018-07-21T00:03:30Z2006-11-30info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfLIMA, Michelline Nery Azevedo. Modal test in low natural frequency structures by using as exciter an instrumented hammer. 2006. 80 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2006.https://repositorio.ufpb.br/jspui/handle/tede/5322porinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UFPBinstname:Universidade Federal da Paraíba (UFPB)instacron:UFPB2018-09-06T00:36:57Zoai:repositorio.ufpb.br:tede/5322Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufpb.br/PUBhttp://tede.biblioteca.ufpb.br:8080/oai/requestdiretoria@ufpb.br|| diretoria@ufpb.bropendoar:2018-09-06T00:36:57Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB)false |
dc.title.none.fl_str_mv |
Testes modais utilizando martelo instrumentado em estruturas de baixas freqüências naturais Modal test in low natural frequency structures by using as exciter an instrumented hammer |
title |
Testes modais utilizando martelo instrumentado em estruturas de baixas freqüências naturais |
spellingShingle |
Testes modais utilizando martelo instrumentado em estruturas de baixas freqüências naturais Lima, Michelline Nery Azevedo Vibração Análise Modal Função Resposta em Freqüência Decimação Vibration Modal Analysis Frequency Response Function Decimation CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Testes modais utilizando martelo instrumentado em estruturas de baixas freqüências naturais |
title_full |
Testes modais utilizando martelo instrumentado em estruturas de baixas freqüências naturais |
title_fullStr |
Testes modais utilizando martelo instrumentado em estruturas de baixas freqüências naturais |
title_full_unstemmed |
Testes modais utilizando martelo instrumentado em estruturas de baixas freqüências naturais |
title_sort |
Testes modais utilizando martelo instrumentado em estruturas de baixas freqüências naturais |
author |
Lima, Michelline Nery Azevedo |
author_facet |
Lima, Michelline Nery Azevedo |
author_role |
author |
dc.contributor.none.fl_str_mv |
Pimentel, Roberto Leal http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4783854P |
dc.contributor.author.fl_str_mv |
Lima, Michelline Nery Azevedo |
dc.subject.por.fl_str_mv |
Vibração Análise Modal Função Resposta em Freqüência Decimação Vibration Modal Analysis Frequency Response Function Decimation CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
topic |
Vibração Análise Modal Função Resposta em Freqüência Decimação Vibration Modal Analysis Frequency Response Function Decimation CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
description |
In this work it is discussed the improvement in the modal test for obtaining the Frequency Response Function (FRF) in low natural frequency structures by using as exciter an instrumented hammer. There are two conflicting needs in this kind of test: on the one hand, the low natural frequencies of the structure, which are usually associated with low damping, demand long acquisition time so that good resolution in the spectrum may exist. On the other hand, the sampling rate must be increased to correctly catch the short duration signal of the hammer. This leads to an elevated number of points in the signal to be acquired, and there may eventually be limitation on such number of points when using spectrum analyzers in the acquisition and obtaining of the FRFs. Thus, in this work, the selective decimation technique explored for the improvement of the test. The work includes the construction of a prototype with two degrees of freedom (S2GL) to serve as case study for the tests enabling the theoretical and experimental Frequency Response Functions (FRF) to be compared, as well as adjusting the parameters of the model. The MATLAB programming language was used for obtaining the FRFs. The efficiency of the improvement applied was verified through the frequency spectra, in which it was observed significant resemblance between the non-decimated FRF with the acquisition having a high number of points, and the decimated FRF with smaller number of points and selected so that it could preserve the correct detection of the hammer signal. |
publishDate |
2006 |
dc.date.none.fl_str_mv |
2006-11-30 2009-10-20 2015-05-08T14:59:36Z 2018-07-21T00:03:30Z 2018-07-21T00:03:30Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
LIMA, Michelline Nery Azevedo. Modal test in low natural frequency structures by using as exciter an instrumented hammer. 2006. 80 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2006. https://repositorio.ufpb.br/jspui/handle/tede/5322 |
identifier_str_mv |
LIMA, Michelline Nery Azevedo. Modal test in low natural frequency structures by using as exciter an instrumented hammer. 2006. 80 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2006. |
url |
https://repositorio.ufpb.br/jspui/handle/tede/5322 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal da Paraíba BR Engenharia Mecânica Programa de Pós Graduação em Engenharia Mecânica UFPB |
publisher.none.fl_str_mv |
Universidade Federal da Paraíba BR Engenharia Mecânica Programa de Pós Graduação em Engenharia Mecânica UFPB |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UFPB instname:Universidade Federal da Paraíba (UFPB) instacron:UFPB |
instname_str |
Universidade Federal da Paraíba (UFPB) |
instacron_str |
UFPB |
institution |
UFPB |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
collection |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB) |
repository.mail.fl_str_mv |
diretoria@ufpb.br|| diretoria@ufpb.br |
_version_ |
1801842888699543552 |