O gerador térmico como analisador de Propriedades térmicas a partir da Harmônica pura
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UFPB |
Texto Completo: | https://repositorio.ufpb.br/jspui/handle/tede/5378 |
Resumo: | This work presents a new method for determination of thermal properties of materials. As it makes use of two different materials at the time of measurement, it is a differential instrument. In the proposed method a thermal wave is generated at one end of the material and measured the temperature at the other end. Based on the relationship between the input and output waves is possible to obtain the thermal properties of the material. The equation of heat conduction in materials was deduced and simulated, to determine the temperature at any point of the materials. In the experimental setup two thermoelectric modules were used along with a PID control to generate a thermal wave and a module to maintain a constant temperature. The LabVIEW platform together with the cFP-2000 was used for data acquisition and control. Type T thermocouples were used as temperature sensors. The materials used in the experiments (ASTM A36 Steel, Nylon and Quartz) have their thermal properties provided by the manufacturers, these values were used as reference for validation. The developed instrument generates waves with amplitudes between 1 and 3 ° C and periods from 100 to 10000 seconds. To solve the problem of determining the temperature in the material, the analogy between thermal and electrical systems was applied, a technique called the Method of Simulation Network. The results were divided into three parts: The first introduces thermal sinusoid generated by the thermal generator and the second compares the theoretical values to the measured values of temperature between the two materials and the third displays the value of thermal conductivity measured by the instrument. The results were positive and indicate the feasibility of the method and instrument. |
id |
UFPB_5f5670a5ca822a459c9c1b0def4091c0 |
---|---|
oai_identifier_str |
oai:repositorio.ufpb.br:tede/5378 |
network_acronym_str |
UFPB |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository_id_str |
|
spelling |
O gerador térmico como analisador de Propriedades térmicas a partir da Harmônica puraThe thermal generator as thermal properties Analyzer through the pure harmonicPropriedades TérmicasMódulo TermoelétricoCircuito TérmicoThermal PropertiesThermoelectric ModuleThermal CircuitENGENHARIAS::ENGENHARIA MECANICAThis work presents a new method for determination of thermal properties of materials. As it makes use of two different materials at the time of measurement, it is a differential instrument. In the proposed method a thermal wave is generated at one end of the material and measured the temperature at the other end. Based on the relationship between the input and output waves is possible to obtain the thermal properties of the material. The equation of heat conduction in materials was deduced and simulated, to determine the temperature at any point of the materials. In the experimental setup two thermoelectric modules were used along with a PID control to generate a thermal wave and a module to maintain a constant temperature. The LabVIEW platform together with the cFP-2000 was used for data acquisition and control. Type T thermocouples were used as temperature sensors. The materials used in the experiments (ASTM A36 Steel, Nylon and Quartz) have their thermal properties provided by the manufacturers, these values were used as reference for validation. The developed instrument generates waves with amplitudes between 1 and 3 ° C and periods from 100 to 10000 seconds. To solve the problem of determining the temperature in the material, the analogy between thermal and electrical systems was applied, a technique called the Method of Simulation Network. The results were divided into three parts: The first introduces thermal sinusoid generated by the thermal generator and the second compares the theoretical values to the measured values of temperature between the two materials and the third displays the value of thermal conductivity measured by the instrument. The results were positive and indicate the feasibility of the method and instrument.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPESNeste trabalho é apresentado um novo método para determinação das propriedades térmicas dos materiais. Como faz uso de dois materiais distintos no momento da medição, trata-se de um instrumento diferencial. No método proposto é gerada uma onda térmica em uma extremidade do material e medida a temperatura de saída na outra extremidade. A partir da relação entre as ondas de entrada e saída é possível obter a condutividade térmica do material. A equação da condução de calor nos materiais foi deduzida e simulada, permitindo determinar a temperatura em qualquer ponto dos materiais. Na montagem experimental foram utilizados dois módulos termoelétricos com controle PID para gerar uma onda térmica e um módulo para manter a temperatura constante. A plataforma LabVIEW em conjunto com o cFP-2000 foram utilizados para aquisição de dados e controle. Foram empregados termopares do tipo T como sensores de temperatura. Os materiais utilizados nos experimentos (Aço ASTM A36, Nylon e Quartzo) têm suas propriedades térmicas previstas pelos fabricantes. Esses valores foram utilizados como referência para a validação. O instrumento desenvolvido gera ondas térmicas com amplitudes entre 1 e 3 ºC e períodos de 100 a 10000 segundos. Para solução do problema de determinação da temperatura nos materiais aplicou-se o Método de Simulação de Rede, que aplica uma analogia entre sistemas elétricos e térmicos. Os resultados foram divididos em três partes: a primeira apresenta a senóide térmica gerada pelo Gerador Térmico; a segunda compara os valores teóricos com os valores medidos da temperatura entre os dois materiais; e a terceira apresenta o valor da condutividade térmica medida pelo instrumento. Os resultados foram positivos e indicam a viabilidade do método e do instrumento.Universidade Federal da ParaíbaBREngenharia MecânicaPrograma de Pós-Graduação em Engenharia MecânicaUFPBBelo, Francisco Antôniohttp://lattes.cnpq.br/9462923096505763Silva, Tássio Alessandro Borges da2015-05-08T14:59:55Z2018-07-21T00:03:45Z2014-09-152018-07-21T00:03:45Z2014-02-21info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfSILVA, Tássio Alessandro Borges da. O gerador térmico como analisador de Propriedades térmicas a partir da Harmônica pura. 2014. 74 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2014.https://repositorio.ufpb.br/jspui/handle/tede/5378porinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UFPBinstname:Universidade Federal da Paraíba (UFPB)instacron:UFPB2018-09-06T00:55:42Zoai:repositorio.ufpb.br:tede/5378Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufpb.br/PUBhttp://tede.biblioteca.ufpb.br:8080/oai/requestdiretoria@ufpb.br|| diretoria@ufpb.bropendoar:2018-09-06T00:55:42Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB)false |
dc.title.none.fl_str_mv |
O gerador térmico como analisador de Propriedades térmicas a partir da Harmônica pura The thermal generator as thermal properties Analyzer through the pure harmonic |
title |
O gerador térmico como analisador de Propriedades térmicas a partir da Harmônica pura |
spellingShingle |
O gerador térmico como analisador de Propriedades térmicas a partir da Harmônica pura Silva, Tássio Alessandro Borges da Propriedades Térmicas Módulo Termoelétrico Circuito Térmico Thermal Properties Thermoelectric Module Thermal Circuit ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
O gerador térmico como analisador de Propriedades térmicas a partir da Harmônica pura |
title_full |
O gerador térmico como analisador de Propriedades térmicas a partir da Harmônica pura |
title_fullStr |
O gerador térmico como analisador de Propriedades térmicas a partir da Harmônica pura |
title_full_unstemmed |
O gerador térmico como analisador de Propriedades térmicas a partir da Harmônica pura |
title_sort |
O gerador térmico como analisador de Propriedades térmicas a partir da Harmônica pura |
author |
Silva, Tássio Alessandro Borges da |
author_facet |
Silva, Tássio Alessandro Borges da |
author_role |
author |
dc.contributor.none.fl_str_mv |
Belo, Francisco Antônio http://lattes.cnpq.br/9462923096505763 |
dc.contributor.author.fl_str_mv |
Silva, Tássio Alessandro Borges da |
dc.subject.por.fl_str_mv |
Propriedades Térmicas Módulo Termoelétrico Circuito Térmico Thermal Properties Thermoelectric Module Thermal Circuit ENGENHARIAS::ENGENHARIA MECANICA |
topic |
Propriedades Térmicas Módulo Termoelétrico Circuito Térmico Thermal Properties Thermoelectric Module Thermal Circuit ENGENHARIAS::ENGENHARIA MECANICA |
description |
This work presents a new method for determination of thermal properties of materials. As it makes use of two different materials at the time of measurement, it is a differential instrument. In the proposed method a thermal wave is generated at one end of the material and measured the temperature at the other end. Based on the relationship between the input and output waves is possible to obtain the thermal properties of the material. The equation of heat conduction in materials was deduced and simulated, to determine the temperature at any point of the materials. In the experimental setup two thermoelectric modules were used along with a PID control to generate a thermal wave and a module to maintain a constant temperature. The LabVIEW platform together with the cFP-2000 was used for data acquisition and control. Type T thermocouples were used as temperature sensors. The materials used in the experiments (ASTM A36 Steel, Nylon and Quartz) have their thermal properties provided by the manufacturers, these values were used as reference for validation. The developed instrument generates waves with amplitudes between 1 and 3 ° C and periods from 100 to 10000 seconds. To solve the problem of determining the temperature in the material, the analogy between thermal and electrical systems was applied, a technique called the Method of Simulation Network. The results were divided into three parts: The first introduces thermal sinusoid generated by the thermal generator and the second compares the theoretical values to the measured values of temperature between the two materials and the third displays the value of thermal conductivity measured by the instrument. The results were positive and indicate the feasibility of the method and instrument. |
publishDate |
2014 |
dc.date.none.fl_str_mv |
2014-09-15 2014-02-21 2015-05-08T14:59:55Z 2018-07-21T00:03:45Z 2018-07-21T00:03:45Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
SILVA, Tássio Alessandro Borges da. O gerador térmico como analisador de Propriedades térmicas a partir da Harmônica pura. 2014. 74 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2014. https://repositorio.ufpb.br/jspui/handle/tede/5378 |
identifier_str_mv |
SILVA, Tássio Alessandro Borges da. O gerador térmico como analisador de Propriedades térmicas a partir da Harmônica pura. 2014. 74 f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2014. |
url |
https://repositorio.ufpb.br/jspui/handle/tede/5378 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal da Paraíba BR Engenharia Mecânica Programa de Pós-Graduação em Engenharia Mecânica UFPB |
publisher.none.fl_str_mv |
Universidade Federal da Paraíba BR Engenharia Mecânica Programa de Pós-Graduação em Engenharia Mecânica UFPB |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UFPB instname:Universidade Federal da Paraíba (UFPB) instacron:UFPB |
instname_str |
Universidade Federal da Paraíba (UFPB) |
instacron_str |
UFPB |
institution |
UFPB |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
collection |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB) |
repository.mail.fl_str_mv |
diretoria@ufpb.br|| diretoria@ufpb.br |
_version_ |
1801842888820129792 |