Caracterização e desenvolvimento de um atuador de força utilizando material de memória de forma
Main Author: | |
---|---|
Publication Date: | 2015 |
Format: | Master thesis |
Language: | por |
Source: | Biblioteca Digital de Teses e Dissertações da UFPB |
Download full: | https://repositorio.ufpb.br/jspui/handle/tede/7578 |
Summary: | This paper presents an experimental design of a power control system and position, using, as actuator, a coil spring of Shape Memory Alloy (SMA), consisting of Ni-Ti alloys, in an adapted screw table. A controller, closed loop, based on Fuzzy logic has been modeled to control the force exerted by the spring which the spring is manipulating by the temperature. In this work, the spring temperature was controlled by an electric current, which produces heat generation by Joule effect. A restoring spring was used to make the shape memory spring to restore the system to its original position. To supply the shape memory spring we used a controlled current source, whose current value that determines the desired force applied which is measured with a load cell and position by a camera connected a computer. The shape memory spring characteristics were determined from conventional approach to helical traction springs, and then characterized by Differential Scanning Calorimetry (DSC). The Fuzzy controller was modeled on LabVIEW installed on a computer equipped with a data acquisition system. The experimental results were obtained from tests on test bench, with the shape memory alloy spring with and without training. |
id |
UFPB_80975b7cc12e5082559b7e23e9511356 |
---|---|
oai_identifier_str |
oai:repositorio.ufpb.br:tede/7578 |
network_acronym_str |
UFPB |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository_id_str |
|
spelling |
Caracterização e desenvolvimento de um atuador de força utilizando material de memória de formaLiga de emória de formaShape memory alloyControlador FuzzyIdentificaçãoFuzzy ControlIdentificationENGENHARIAS::ENGENHARIA MECANICAThis paper presents an experimental design of a power control system and position, using, as actuator, a coil spring of Shape Memory Alloy (SMA), consisting of Ni-Ti alloys, in an adapted screw table. A controller, closed loop, based on Fuzzy logic has been modeled to control the force exerted by the spring which the spring is manipulating by the temperature. In this work, the spring temperature was controlled by an electric current, which produces heat generation by Joule effect. A restoring spring was used to make the shape memory spring to restore the system to its original position. To supply the shape memory spring we used a controlled current source, whose current value that determines the desired force applied which is measured with a load cell and position by a camera connected a computer. The shape memory spring characteristics were determined from conventional approach to helical traction springs, and then characterized by Differential Scanning Calorimetry (DSC). The Fuzzy controller was modeled on LabVIEW installed on a computer equipped with a data acquisition system. The experimental results were obtained from tests on test bench, with the shape memory alloy spring with and without training.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPESNeste trabalho apresenta-se um projeto experimental de um sistema de controle de força e de posição utilizando, como atuador, uma mola helicoidal de Liga de Memória de Forma (LMF), constituída de ligas de Ni-Ti, em uma mesa de fuso adaptada. Um controlador, em malha fechada, baseado em Lógica Fuzzy foi modelado para controlar a força exercida pela mola, a qual é manipulada através da temperatura da mola. Neste trabalho, a temperatura de mola foi controlada através de uma corrente elétrica, que produz geração de calor através do efeito Joule. Uma mola restauradora foi utilizada para fazer a mola de memória de forma restaurar o sistema à sua posição original. Para alimentar a mola de memória de forma utilizou-se uma fonte de corrente continua controlada, cujo valor dessa corrente determina a força aplicada desejada a qual foi medida com uma célula de carga e a posição através de uma câmera conectada a um computador. As características da mola de memória de forma foram determinadas a partir de abordagem convencional para molas helicoidais de tração, e em seguida caracterizada, através de calorimetria diferencial de varredura (DSC). O controlador Fuzzy foi modelado no ambiente LabVIEW instalado em um computador equipado com um sistema de aquisição de dados. Os resultados experimentais foram obtidos em ensaios realizados na bancada de teste, com a mola de liga de memoria de forma com e sem treinamento.Universidade Federal da ParaíbaBrasilEngenharia MecânicaPrograma de Pós-Graduação em Engenharia MecânicaUFPBSilva, Simplício Arnaud dahttp://lattes.cnpq.br/9132549641144236Oliveira, Samuel de2015-11-11T15:09:33Z2018-07-21T00:03:55Z2018-07-21T00:03:55Z2015-02-02info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfOLIVEIRA, Samuel de Oliveira. Caracterização e desenvolvimento de um atuador de força utilizando material de memória de forma. 2015. 68f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2015.https://repositorio.ufpb.br/jspui/handle/tede/7578porinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UFPBinstname:Universidade Federal da Paraíba (UFPB)instacron:UFPB2018-09-06T01:08:35Zoai:repositorio.ufpb.br:tede/7578Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufpb.br/PUBhttp://tede.biblioteca.ufpb.br:8080/oai/requestdiretoria@ufpb.br|| diretoria@ufpb.bropendoar:2018-09-06T01:08:35Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB)false |
dc.title.none.fl_str_mv |
Caracterização e desenvolvimento de um atuador de força utilizando material de memória de forma |
title |
Caracterização e desenvolvimento de um atuador de força utilizando material de memória de forma |
spellingShingle |
Caracterização e desenvolvimento de um atuador de força utilizando material de memória de forma Oliveira, Samuel de Liga de emória de forma Shape memory alloy Controlador Fuzzy Identificação Fuzzy Control Identification ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Caracterização e desenvolvimento de um atuador de força utilizando material de memória de forma |
title_full |
Caracterização e desenvolvimento de um atuador de força utilizando material de memória de forma |
title_fullStr |
Caracterização e desenvolvimento de um atuador de força utilizando material de memória de forma |
title_full_unstemmed |
Caracterização e desenvolvimento de um atuador de força utilizando material de memória de forma |
title_sort |
Caracterização e desenvolvimento de um atuador de força utilizando material de memória de forma |
author |
Oliveira, Samuel de |
author_facet |
Oliveira, Samuel de |
author_role |
author |
dc.contributor.none.fl_str_mv |
Silva, Simplício Arnaud da http://lattes.cnpq.br/9132549641144236 |
dc.contributor.author.fl_str_mv |
Oliveira, Samuel de |
dc.subject.por.fl_str_mv |
Liga de emória de forma Shape memory alloy Controlador Fuzzy Identificação Fuzzy Control Identification ENGENHARIAS::ENGENHARIA MECANICA |
topic |
Liga de emória de forma Shape memory alloy Controlador Fuzzy Identificação Fuzzy Control Identification ENGENHARIAS::ENGENHARIA MECANICA |
description |
This paper presents an experimental design of a power control system and position, using, as actuator, a coil spring of Shape Memory Alloy (SMA), consisting of Ni-Ti alloys, in an adapted screw table. A controller, closed loop, based on Fuzzy logic has been modeled to control the force exerted by the spring which the spring is manipulating by the temperature. In this work, the spring temperature was controlled by an electric current, which produces heat generation by Joule effect. A restoring spring was used to make the shape memory spring to restore the system to its original position. To supply the shape memory spring we used a controlled current source, whose current value that determines the desired force applied which is measured with a load cell and position by a camera connected a computer. The shape memory spring characteristics were determined from conventional approach to helical traction springs, and then characterized by Differential Scanning Calorimetry (DSC). The Fuzzy controller was modeled on LabVIEW installed on a computer equipped with a data acquisition system. The experimental results were obtained from tests on test bench, with the shape memory alloy spring with and without training. |
publishDate |
2015 |
dc.date.none.fl_str_mv |
2015-11-11T15:09:33Z 2015-02-02 2018-07-21T00:03:55Z 2018-07-21T00:03:55Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
OLIVEIRA, Samuel de Oliveira. Caracterização e desenvolvimento de um atuador de força utilizando material de memória de forma. 2015. 68f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2015. https://repositorio.ufpb.br/jspui/handle/tede/7578 |
identifier_str_mv |
OLIVEIRA, Samuel de Oliveira. Caracterização e desenvolvimento de um atuador de força utilizando material de memória de forma. 2015. 68f. Dissertação (Mestrado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2015. |
url |
https://repositorio.ufpb.br/jspui/handle/tede/7578 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal da Paraíba Brasil Engenharia Mecânica Programa de Pós-Graduação em Engenharia Mecânica UFPB |
publisher.none.fl_str_mv |
Universidade Federal da Paraíba Brasil Engenharia Mecânica Programa de Pós-Graduação em Engenharia Mecânica UFPB |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UFPB instname:Universidade Federal da Paraíba (UFPB) instacron:UFPB |
instname_str |
Universidade Federal da Paraíba (UFPB) |
instacron_str |
UFPB |
institution |
UFPB |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
collection |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB) |
repository.mail.fl_str_mv |
diretoria@ufpb.br|| diretoria@ufpb.br |
_version_ |
1798963925576843264 |