Forças de corte geradas por torneamento : um estudo de caso das ligas Cu-Al-Be e Cu-Al-Be-Nb-Ni passíveis do efeito memória de forma
Autor(a) principal: | |
---|---|
Data de Publicação: | 2014 |
Tipo de documento: | Tese |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UFPB |
Texto Completo: | https://repositorio.ufpb.br/jspui/handle/tede/5379 |
Resumo: | The shape memory alloy, more specifically constituted of CuAlBe, have played an important role in the manufacture of electromechanical components, especially when worked requests from thermal and/or applied stresses. At first, this present research work, were obtained, by casting the gas, samples of alloys Cu-11.8%Al-0.60%Be; Cu-11.8%Al-0.55%Be; Cu-11.8%Al-0.55%Be-0.50%Nb-0.27%Ni (wt%). Sequentially, quenched to half of them, with the intention of doing them acquire the shape memory effect. In a third moment, said samples passed assays DSCs, aiming raise the temperature curves of phase transformation (austenite: Ai/Af and martensite: Mi/Mf). The main study, performed during machining by turning dry, using a piezoelectric dynamometer, were defined the cutting forces of samples tempered and not tempered. In compliance with the track methodology, were applied five replicates, with four levels of cutting speed for each of the samples tested. The signals from the dynamometer were processed in LabVIEW and further processed in by a program done on MatLAB. Secondary assays were also performed soon after machining by turning dry. In the first, by means of a K-type thermocouple, temperatures of machining were measured along the stride; on the second, by assay of circularity, it was verified if there was or no retention of the martensite in the samples of shape memory alloys. It was found that the percentage of beryllium and nickel present in the alloys investigated, as well as the introduction of niobium as a grain refiner were decisive for achieving the results |
id |
UFPB_8550503ba1c4456ae55e5b765875b9c0 |
---|---|
oai_identifier_str |
oai:repositorio.ufpb.br:tede/5379 |
network_acronym_str |
UFPB |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository_id_str |
|
spelling |
Forças de corte geradas por torneamento : um estudo de caso das ligas Cu-Al-Be e Cu-Al-Be-Nb-Ni passíveis do efeito memória de formaForças de corteUsinagemLigas com memória de formaCutting forcesMachiningShape memory alloysENGENHARIAS::ENGENHARIA MECANICAThe shape memory alloy, more specifically constituted of CuAlBe, have played an important role in the manufacture of electromechanical components, especially when worked requests from thermal and/or applied stresses. At first, this present research work, were obtained, by casting the gas, samples of alloys Cu-11.8%Al-0.60%Be; Cu-11.8%Al-0.55%Be; Cu-11.8%Al-0.55%Be-0.50%Nb-0.27%Ni (wt%). Sequentially, quenched to half of them, with the intention of doing them acquire the shape memory effect. In a third moment, said samples passed assays DSCs, aiming raise the temperature curves of phase transformation (austenite: Ai/Af and martensite: Mi/Mf). The main study, performed during machining by turning dry, using a piezoelectric dynamometer, were defined the cutting forces of samples tempered and not tempered. In compliance with the track methodology, were applied five replicates, with four levels of cutting speed for each of the samples tested. The signals from the dynamometer were processed in LabVIEW and further processed in by a program done on MatLAB. Secondary assays were also performed soon after machining by turning dry. In the first, by means of a K-type thermocouple, temperatures of machining were measured along the stride; on the second, by assay of circularity, it was verified if there was or no retention of the martensite in the samples of shape memory alloys. It was found that the percentage of beryllium and nickel present in the alloys investigated, as well as the introduction of niobium as a grain refiner were decisive for achieving the resultsCoordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPESAs ligas com memória de forma, mais especificamente as constituídas de CuAlBe, têm desempenhado um papel importante na fabricação de componentes eletromecânicos, sobretudo quando trabalhados a partir de solicitações térmicas e/ou tensões aplicadas. A princípio, neste presente trabalho de pesquisa, foram obtidas, por fundição a gás, amostras das ligas Cu-11,8%Al-0,60%Be; Cu-11,8%Al-0,55%Be; Cu-11,8%Al-0,55%Be-0,50%Nb-0,27%Ni (% em peso). Sequencialmente, temperou-se a metade delas, com o intuito de fazê-las adquirir o efeito memória de forma. Num terceiro momento, as referidas amostras passaram por ensaios de DSCs, visando levantar as curvas de temperatura de transformação de fases (da austenita: Ai/Af e da martensita: Mi/Mf). No ensaio principal, realizado durante a usinagem por torneamento a seco, por meio de um dinamômetro piezoelétrico, definiram-se as forças de corte das amostras temperadas e não temperadas. Dando cumprimento à trilha metodológica, foram aplicadas cinco réplicas, com quatro níveis de velocidade de corte para cada uma das amostras ensaiadas. Os sinais oriundos do dinamômetro foram processados no LabVIEW e posteriormente tratados por uma programação feita em MatLAB. Ensaios secundários também foram realizados logo após a usinagem por torneamento a seco. No primeiro, por meio de um termopar tipo K, foram medidas as temperaturas de usinagem ao longo da passada; no segundo, por ensaio de circularidade, foi verificado se ocorreu ou não a retenção da martensita nas amostras das ligas com memória de forma. Constatou-se que a percentagem de berílio e de níquel presente nas ligas investigadas, bem como a introdução do nióbio como refinador de grãos foram decisivos para o alcance dos resultados obtidosUniversidade Federal da ParaíbaBREngenharia MecânicaPrograma de Pós-Graduação em Engenharia MecânicaUFPBMelo, Tadeu Antonio de Azevedohttp://lattes.cnpq.br/1944401579741554Silva, Francisco Valdenor Pereira da2015-05-08T14:59:55Z2018-07-21T00:03:42Z2014-11-182018-07-21T00:03:42Z2014-02-04info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/doctoralThesisapplication/pdfSILVA, Francisco Valdenor Pereira da. Forças de corte geradas por torneamento: um estudo de caso das ligas Cu-Al-Be e Cu-Al-Be-Nb-Ni passíveis do efeito memória de Forma. 2014. 124 f. Tese (Doutorado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2014.https://repositorio.ufpb.br/jspui/handle/tede/5379porinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UFPBinstname:Universidade Federal da Paraíba (UFPB)instacron:UFPB2018-09-06T00:51:51Zoai:repositorio.ufpb.br:tede/5379Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufpb.br/PUBhttp://tede.biblioteca.ufpb.br:8080/oai/requestdiretoria@ufpb.br|| diretoria@ufpb.bropendoar:2018-09-06T00:51:51Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB)false |
dc.title.none.fl_str_mv |
Forças de corte geradas por torneamento : um estudo de caso das ligas Cu-Al-Be e Cu-Al-Be-Nb-Ni passíveis do efeito memória de forma |
title |
Forças de corte geradas por torneamento : um estudo de caso das ligas Cu-Al-Be e Cu-Al-Be-Nb-Ni passíveis do efeito memória de forma |
spellingShingle |
Forças de corte geradas por torneamento : um estudo de caso das ligas Cu-Al-Be e Cu-Al-Be-Nb-Ni passíveis do efeito memória de forma Silva, Francisco Valdenor Pereira da Forças de corte Usinagem Ligas com memória de forma Cutting forces Machining Shape memory alloys ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Forças de corte geradas por torneamento : um estudo de caso das ligas Cu-Al-Be e Cu-Al-Be-Nb-Ni passíveis do efeito memória de forma |
title_full |
Forças de corte geradas por torneamento : um estudo de caso das ligas Cu-Al-Be e Cu-Al-Be-Nb-Ni passíveis do efeito memória de forma |
title_fullStr |
Forças de corte geradas por torneamento : um estudo de caso das ligas Cu-Al-Be e Cu-Al-Be-Nb-Ni passíveis do efeito memória de forma |
title_full_unstemmed |
Forças de corte geradas por torneamento : um estudo de caso das ligas Cu-Al-Be e Cu-Al-Be-Nb-Ni passíveis do efeito memória de forma |
title_sort |
Forças de corte geradas por torneamento : um estudo de caso das ligas Cu-Al-Be e Cu-Al-Be-Nb-Ni passíveis do efeito memória de forma |
author |
Silva, Francisco Valdenor Pereira da |
author_facet |
Silva, Francisco Valdenor Pereira da |
author_role |
author |
dc.contributor.none.fl_str_mv |
Melo, Tadeu Antonio de Azevedo http://lattes.cnpq.br/1944401579741554 |
dc.contributor.author.fl_str_mv |
Silva, Francisco Valdenor Pereira da |
dc.subject.por.fl_str_mv |
Forças de corte Usinagem Ligas com memória de forma Cutting forces Machining Shape memory alloys ENGENHARIAS::ENGENHARIA MECANICA |
topic |
Forças de corte Usinagem Ligas com memória de forma Cutting forces Machining Shape memory alloys ENGENHARIAS::ENGENHARIA MECANICA |
description |
The shape memory alloy, more specifically constituted of CuAlBe, have played an important role in the manufacture of electromechanical components, especially when worked requests from thermal and/or applied stresses. At first, this present research work, were obtained, by casting the gas, samples of alloys Cu-11.8%Al-0.60%Be; Cu-11.8%Al-0.55%Be; Cu-11.8%Al-0.55%Be-0.50%Nb-0.27%Ni (wt%). Sequentially, quenched to half of them, with the intention of doing them acquire the shape memory effect. In a third moment, said samples passed assays DSCs, aiming raise the temperature curves of phase transformation (austenite: Ai/Af and martensite: Mi/Mf). The main study, performed during machining by turning dry, using a piezoelectric dynamometer, were defined the cutting forces of samples tempered and not tempered. In compliance with the track methodology, were applied five replicates, with four levels of cutting speed for each of the samples tested. The signals from the dynamometer were processed in LabVIEW and further processed in by a program done on MatLAB. Secondary assays were also performed soon after machining by turning dry. In the first, by means of a K-type thermocouple, temperatures of machining were measured along the stride; on the second, by assay of circularity, it was verified if there was or no retention of the martensite in the samples of shape memory alloys. It was found that the percentage of beryllium and nickel present in the alloys investigated, as well as the introduction of niobium as a grain refiner were decisive for achieving the results |
publishDate |
2014 |
dc.date.none.fl_str_mv |
2014-11-18 2014-02-04 2015-05-08T14:59:55Z 2018-07-21T00:03:42Z 2018-07-21T00:03:42Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/doctoralThesis |
format |
doctoralThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
SILVA, Francisco Valdenor Pereira da. Forças de corte geradas por torneamento: um estudo de caso das ligas Cu-Al-Be e Cu-Al-Be-Nb-Ni passíveis do efeito memória de Forma. 2014. 124 f. Tese (Doutorado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2014. https://repositorio.ufpb.br/jspui/handle/tede/5379 |
identifier_str_mv |
SILVA, Francisco Valdenor Pereira da. Forças de corte geradas por torneamento: um estudo de caso das ligas Cu-Al-Be e Cu-Al-Be-Nb-Ni passíveis do efeito memória de Forma. 2014. 124 f. Tese (Doutorado em Engenharia Mecânica) - Universidade Federal da Paraíba, João Pessoa, 2014. |
url |
https://repositorio.ufpb.br/jspui/handle/tede/5379 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal da Paraíba BR Engenharia Mecânica Programa de Pós-Graduação em Engenharia Mecânica UFPB |
publisher.none.fl_str_mv |
Universidade Federal da Paraíba BR Engenharia Mecânica Programa de Pós-Graduação em Engenharia Mecânica UFPB |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UFPB instname:Universidade Federal da Paraíba (UFPB) instacron:UFPB |
instname_str |
Universidade Federal da Paraíba (UFPB) |
instacron_str |
UFPB |
institution |
UFPB |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
collection |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB) |
repository.mail.fl_str_mv |
diretoria@ufpb.br|| diretoria@ufpb.br |
_version_ |
1801842888797061120 |