Microfabricação de um analisador em Fluxo-Batelada (Micro Flow-Batch) à base de polímero fotocurável Uretano-Acrilato
Autor(a) principal: | |
---|---|
Data de Publicação: | 2010 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Biblioteca Digital de Teses e Dissertações da UFPB |
Texto Completo: | https://repositorio.ufpb.br/jspui/handle/tede/7171 |
Resumo: | This work describes the construction of a new flow-batch analyzer (FB) in micro scale (micro Flow-Batch-μFBA) using the technique of deep ultraviolet photolithography with commercial resin based in urethane acrylate oligomers (UA). The device was constructed from the union of two layers of pre-polymerized resin of 3.4 mm thick each, thus forming a single structure. The main feature of the new device is the small volume of its analysis chamber, which can be 100-200 μL, allowing the homogenization of reagent solutions in a time of 2.s. In this sense, the decrease in reagents consumption and hence generation of waste (ten times smaller than a conventional FB), wich is in line with the requirements of green chemistry and with the new position of the eco-efficiency. The system offers the following progress in relation to micro fabrication with urethane acrylate resin: (i) depth control of the channels during photolithography; (ii) axial mixer incorporated; (iii) LED - Light emitting diode (530 nm) and detector (photodiode) coupled to the device body; The depth control of the channels allows adjustment of the volume of the chamber and the LED to the mixing chamber. The LED and detector connector pins is the elements that makes the device fixed on its box. In this first assembly, system were used in photometric determination of Fe (II) in pharmaceuticals. The model for the calibration curve was validated by analysis of variance (ANOVA), and their analytical results were compared with those obtained in batch by the reference method, the application of paired t-test found no statistically significant differences at a confidence level of 95%. |
id |
UFPB_aa8e916d186f7d604c269c82c63cebf7 |
---|---|
oai_identifier_str |
oai:repositorio.ufpb.br:tede/7171 |
network_acronym_str |
UFPB |
network_name_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository_id_str |
|
spelling |
Microfabricação de um analisador em Fluxo-Batelada (Micro Flow-Batch) à base de polímero fotocurável Uretano-AcrilatoQuímicaMicrofabricaçãoFlow-BatchμTASLab-on-a-chipFotômetroChemistryMicrofabricationFlow-BatchμTASLab-on-a-chipPhotometerCIENCIAS EXATAS E DA TERRA::QUIMICAThis work describes the construction of a new flow-batch analyzer (FB) in micro scale (micro Flow-Batch-μFBA) using the technique of deep ultraviolet photolithography with commercial resin based in urethane acrylate oligomers (UA). The device was constructed from the union of two layers of pre-polymerized resin of 3.4 mm thick each, thus forming a single structure. The main feature of the new device is the small volume of its analysis chamber, which can be 100-200 μL, allowing the homogenization of reagent solutions in a time of 2.s. In this sense, the decrease in reagents consumption and hence generation of waste (ten times smaller than a conventional FB), wich is in line with the requirements of green chemistry and with the new position of the eco-efficiency. The system offers the following progress in relation to micro fabrication with urethane acrylate resin: (i) depth control of the channels during photolithography; (ii) axial mixer incorporated; (iii) LED - Light emitting diode (530 nm) and detector (photodiode) coupled to the device body; The depth control of the channels allows adjustment of the volume of the chamber and the LED to the mixing chamber. The LED and detector connector pins is the elements that makes the device fixed on its box. In this first assembly, system were used in photometric determination of Fe (II) in pharmaceuticals. The model for the calibration curve was validated by analysis of variance (ANOVA), and their analytical results were compared with those obtained in batch by the reference method, the application of paired t-test found no statistically significant differences at a confidence level of 95%.Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPESNo presente trabalho é descrita a construção de um novo analisador Flow- Batch (FB) em escala micro (micro Flow-Batch - μFBA) utilizando a técnica de fotolitografia profunda no ultravioleta com resina comercial à base de oligômeros uretano e acrilato (UA). O dispositivo foi construído a partir da união de duas camadas da resina pré-polimerizada de 3,4 mm de espessura cada uma, formando assim uma estrutura única. A característica principal do novo dispositivo é o pequeno volume da câmara de análise, que pode ser de 100 a 200 μL, permitindo a homogeneização das soluções reagentes em um tempo de 2.s. Nesse sentido, a diminuição do consumo de reagentes e, conseqüentemente, de resíduos gerados (dez vezes menor que um FB convencional), apontam na direção dos requisitos da química verde e se alinham com a nova postura da ecoeficiência. O sistema apresenta os seguintes avanços em relação à microfabricação com resina uretanoacrilato: (i) controle da profundidade dos canais durante a fotolitografia; (ii) agitador do tipo axial incorporado; (iii) LED emissor de luz (530nm) e detector (fotodiodo) acoplados ao corpo do dispositivo. O controle da profundidade permitiu o ajuste do volume da câmara e do LED à câmara de mistura. Os próprios pinos conectores do LED e do detector foram utilizados como elementos de fixação da peça em sua caixa. Nesta primeira montagem, o sistema foi empregado na determinação fotométrica de Fe (II) em medicamentos. O modelo para a curva de calibração foi validado através da Análise de Variância (ANOVA), e seus resultados analíticos foram comparados com aqueles obtidos em análises de referência através da aplicação do teste-t emparelhado, não apresentando diferenças estatísticas significativas a um nível de confiança de 95%.Universidade Federal da ParaíbaBRQuímicaPrograma de Pós-Graduação em QuímicaUFPBAraújo, Mário César Ugulino dehttp://lattes.cnpq.br/7281739070942782Monte Filho, Severino Sílvio do2015-05-14T13:21:46Z2018-07-21T00:30:58Z2010-05-202018-07-21T00:30:58Z2010-03-17info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisapplication/pdfMONTE FILHO, Severino Sílvio do. Microfabricação de um analisador em Fluxo-Batelada (Micro Flow-Batch) à base de polímero fotocurável Uretano-Acrilato. 2010. 95 f. Dissertação (Mestrado em Química) - Universidade Federal da Paraíba, João Pessoa, 2010.https://repositorio.ufpb.br/jspui/handle/tede/7171porinfo:eu-repo/semantics/openAccessreponame:Biblioteca Digital de Teses e Dissertações da UFPBinstname:Universidade Federal da Paraíba (UFPB)instacron:UFPB2020-02-24T23:45:47Zoai:repositorio.ufpb.br:tede/7171Biblioteca Digital de Teses e Dissertaçõeshttps://repositorio.ufpb.br/PUBhttp://tede.biblioteca.ufpb.br:8080/oai/requestdiretoria@ufpb.br|| diretoria@ufpb.bropendoar:2020-02-24T23:45:47Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB)false |
dc.title.none.fl_str_mv |
Microfabricação de um analisador em Fluxo-Batelada (Micro Flow-Batch) à base de polímero fotocurável Uretano-Acrilato |
title |
Microfabricação de um analisador em Fluxo-Batelada (Micro Flow-Batch) à base de polímero fotocurável Uretano-Acrilato |
spellingShingle |
Microfabricação de um analisador em Fluxo-Batelada (Micro Flow-Batch) à base de polímero fotocurável Uretano-Acrilato Monte Filho, Severino Sílvio do Química Microfabricação Flow-Batch μTAS Lab-on-a-chip Fotômetro Chemistry Microfabrication Flow-Batch μTAS Lab-on-a-chip Photometer CIENCIAS EXATAS E DA TERRA::QUIMICA |
title_short |
Microfabricação de um analisador em Fluxo-Batelada (Micro Flow-Batch) à base de polímero fotocurável Uretano-Acrilato |
title_full |
Microfabricação de um analisador em Fluxo-Batelada (Micro Flow-Batch) à base de polímero fotocurável Uretano-Acrilato |
title_fullStr |
Microfabricação de um analisador em Fluxo-Batelada (Micro Flow-Batch) à base de polímero fotocurável Uretano-Acrilato |
title_full_unstemmed |
Microfabricação de um analisador em Fluxo-Batelada (Micro Flow-Batch) à base de polímero fotocurável Uretano-Acrilato |
title_sort |
Microfabricação de um analisador em Fluxo-Batelada (Micro Flow-Batch) à base de polímero fotocurável Uretano-Acrilato |
author |
Monte Filho, Severino Sílvio do |
author_facet |
Monte Filho, Severino Sílvio do |
author_role |
author |
dc.contributor.none.fl_str_mv |
Araújo, Mário César Ugulino de http://lattes.cnpq.br/7281739070942782 |
dc.contributor.author.fl_str_mv |
Monte Filho, Severino Sílvio do |
dc.subject.por.fl_str_mv |
Química Microfabricação Flow-Batch μTAS Lab-on-a-chip Fotômetro Chemistry Microfabrication Flow-Batch μTAS Lab-on-a-chip Photometer CIENCIAS EXATAS E DA TERRA::QUIMICA |
topic |
Química Microfabricação Flow-Batch μTAS Lab-on-a-chip Fotômetro Chemistry Microfabrication Flow-Batch μTAS Lab-on-a-chip Photometer CIENCIAS EXATAS E DA TERRA::QUIMICA |
description |
This work describes the construction of a new flow-batch analyzer (FB) in micro scale (micro Flow-Batch-μFBA) using the technique of deep ultraviolet photolithography with commercial resin based in urethane acrylate oligomers (UA). The device was constructed from the union of two layers of pre-polymerized resin of 3.4 mm thick each, thus forming a single structure. The main feature of the new device is the small volume of its analysis chamber, which can be 100-200 μL, allowing the homogenization of reagent solutions in a time of 2.s. In this sense, the decrease in reagents consumption and hence generation of waste (ten times smaller than a conventional FB), wich is in line with the requirements of green chemistry and with the new position of the eco-efficiency. The system offers the following progress in relation to micro fabrication with urethane acrylate resin: (i) depth control of the channels during photolithography; (ii) axial mixer incorporated; (iii) LED - Light emitting diode (530 nm) and detector (photodiode) coupled to the device body; The depth control of the channels allows adjustment of the volume of the chamber and the LED to the mixing chamber. The LED and detector connector pins is the elements that makes the device fixed on its box. In this first assembly, system were used in photometric determination of Fe (II) in pharmaceuticals. The model for the calibration curve was validated by analysis of variance (ANOVA), and their analytical results were compared with those obtained in batch by the reference method, the application of paired t-test found no statistically significant differences at a confidence level of 95%. |
publishDate |
2010 |
dc.date.none.fl_str_mv |
2010-05-20 2010-03-17 2015-05-14T13:21:46Z 2018-07-21T00:30:58Z 2018-07-21T00:30:58Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
MONTE FILHO, Severino Sílvio do. Microfabricação de um analisador em Fluxo-Batelada (Micro Flow-Batch) à base de polímero fotocurável Uretano-Acrilato. 2010. 95 f. Dissertação (Mestrado em Química) - Universidade Federal da Paraíba, João Pessoa, 2010. https://repositorio.ufpb.br/jspui/handle/tede/7171 |
identifier_str_mv |
MONTE FILHO, Severino Sílvio do. Microfabricação de um analisador em Fluxo-Batelada (Micro Flow-Batch) à base de polímero fotocurável Uretano-Acrilato. 2010. 95 f. Dissertação (Mestrado em Química) - Universidade Federal da Paraíba, João Pessoa, 2010. |
url |
https://repositorio.ufpb.br/jspui/handle/tede/7171 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal da Paraíba BR Química Programa de Pós-Graduação em Química UFPB |
publisher.none.fl_str_mv |
Universidade Federal da Paraíba BR Química Programa de Pós-Graduação em Química UFPB |
dc.source.none.fl_str_mv |
reponame:Biblioteca Digital de Teses e Dissertações da UFPB instname:Universidade Federal da Paraíba (UFPB) instacron:UFPB |
instname_str |
Universidade Federal da Paraíba (UFPB) |
instacron_str |
UFPB |
institution |
UFPB |
reponame_str |
Biblioteca Digital de Teses e Dissertações da UFPB |
collection |
Biblioteca Digital de Teses e Dissertações da UFPB |
repository.name.fl_str_mv |
Biblioteca Digital de Teses e Dissertações da UFPB - Universidade Federal da Paraíba (UFPB) |
repository.mail.fl_str_mv |
diretoria@ufpb.br|| diretoria@ufpb.br |
_version_ |
1801842922069426176 |