ROBUSTNESS ANALYSIS OF GEODETIC NETWORKS IN THE CASE OF CORRELATED OBSERVATIONS

• Autor(a) principal: YETKIN, MEVLUT
• Data de Publicação: 2013
• Outros Autores: BERBER, MUSTAFA, INAL, CEVAT
• Tipo de documento: Artigo
• Idioma: por
• Título da fonte: Boletim de Ciências Geodésicas
• Texto Completo: https://revistas.ufpr.br/bcg/article/view/33360
• topic: Geciências; Geodésia; Robustness; Strain; Displacement; Reliability; GPS Network

GPS (or GNSS) networks are invaluable tools for monitoring natural hazards such as earthquakes. However, blunders in GPS observations may be mistakenly interpreted as deformation. Therefore, robust networks are needed in deformation monitoring using GPS networks. Robustness analysis is a natural merger of reliability and strain and defined as the ability to resist deformations caused by the maximum undetectable errors as determined from internal reliability analysis. However, to obtain rigorously correct results; the correlations among the observations must be considered while computing maximum undetectable errors. Therefore, we propose to use the normalized reliability numbers instead of redundancy numbers (Baarda’s approach) in robustness analysis of a GPS network. A simple mathematical relation showing the ratio between uncorrelated and correlated cases for maximum undetectable error is derived. The same ratio is also valid for the displacements. Numerical results show that if correlations among observations are ignored, dramatically different displacements can be obtained depending on the size of multiple correlation coefficients. Furthermore, when normalized reliability numbers are small, displacements get large, i.e., observations with low reliability numbers cause bigger displacements compared to observations with high reliability numbers.