Produção de biomassa e de lipídeos por cultivo misto de microalgas suplementado com CO2

Detalhes bibliográficos
Autor(a) principal: Pereira, Aline Bescrovaine
Data de Publicação: 2013
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Repositório Institucional da UFPR
Texto Completo: https://hdl.handle.net/1884/34502
Resumo: Orientador : Prof. Dr. David Alexander Mitchell
id UFPR_c1af5254495ed74e12017591004ac9d5
oai_identifier_str oai:acervodigital.ufpr.br:1884/34502
network_acronym_str UFPR
network_name_str Repositório Institucional da UFPR
repository_id_str 308
spelling Pereira, Aline BescrovaineMitchell, David Alexander, 1952-Mariano, André Bellin, 1977-Universidade Federal do Paraná. Setor de Tecnologia. Programa de Pós-Graduação em Engenharia Química2021-06-09T19:23:57Z2021-06-09T19:23:57Z2013https://hdl.handle.net/1884/34502Orientador : Prof. Dr. David Alexander MitchellCo-Orientador: Prof. Dr. André Bellin MarianoDissertação (mestrado) - Universidade Federal do Paraná, Setor de Tecnologia, Programa de Pós-Graduação em Engenharia Química. Defesa: Curitiba, 25/04/2013Inclui referênciasResumo: A biomassa de microalgas se tornou uma promessa de matéria-prima para a produção de biocombustíveis, pois algumas espécies podem acumular em sua biomassa grandes quantidades de lipídeos, precursores da produção de biodiesel. O presente estudo está inserido no Núcleo de Pesquisa e Desenvolvimento de Energia Autossustentável (NPDEAS) da Universidade Federal do Paraná, o qual busca desenvolver a cadeia de tecnologias que possibilita a produção de biomassa e biodiesel de microalgas. O presente estudo uniu, pela primeira vez em escala laboratorial no NPDEAS, duas estratégias já utilizadas na literatura para aumentar a produção de biomassa e lipídeos de microalgas. A primeira é a utilização de aeração enriquecida com CO2 puro comercial no período iluminado, a fim de aumentar a velocidade de transferência de CO2 para o meio líquido e, por consequência, favorecer a realização da fotossíntese. A segunda é a utilização de cultivos mistos de microalgas, ou seja, cultivos originados de um primeiro inóculo composto de uma amostra coletada em ambiente aquático natural contendo uma mistura de espécies de microalgas. A comunidade de microalgas em um cultivo misto tende a apresentar oscilações no perfil de espécies, o que pode alterar a quantidade e a qualidade da biomassa, porém nenhum dos estudos sobre cultivos mistos descritos anteriormente na literatura aborda a reprodutibilidade dos experimentos. O presente trabalho teve o objetivo não somente de avaliar o efeito das duas estratégias na produção de biomassa e lipídeos, mas também de avaliar a repetibilidade e a reprodutibilidade de cultivos mistos. Este estudo demonstrou que a aeração enriquecida com 2% (v/v) de CO2 aumentou significativamente (alfa=0,01) a velocidade de crescimento na fase linear de 12 mg.L-1.dia-1, com aeração exclusiva por ar atmosférico, para 28 mg.L-1.dia-1. Porém, a inserção de aeração com 5% (v/v) de CO2 demonstrou a falta de reprodutibilidade desses resultados, uma vez que, enquanto em um 1° experimento, a velocidade de crescimento na fase linear, 32 mg.L-1.dia-1, não apresentou diferença significativa (alfa=0,01) em relação à do cultivo com 2% (v/v), em um 2° experimento, essa velocidade apresentou o valor significativamente menor (alfa=0,01) de 17 mg.L-1.dia-1. A falta de reprodutibilidade também se repetiu no conteúdo de lipídeos totais da biomassa seca, o qual se manteve inalterado (alfa=0,01) e em torno de 15% nos cultivos com apenas ar atmosférico, com 2% (v/v) de CO2 e no 1° cultivo com 5% (v/v) de CO2, mas apresentou queda significativa (alfa=0,01) para 12% no 2° cultivo. A utilização de aeração enriquecida de CO2 aumentou a repetibilidade dos cultivos mistos, uma vez que tornou mais próximas as curvas de crescimento dentro das replicatas de condição experimental. Essa aeração também diminuiu de 27% para 0% a fração de frascos que sofreram colapso, ou seja, morte prematura das células. Em experimentos futuros, o aumento da concentração celular inicial dos cultivos e o uso de inóculos mistos padronizados, pela mistura de cultivos estoque unialgais, são alternativas para aumentar a reprodutibilidade dos resultados.Abstract: Microalgal biomass has become a promising raw material for the production of biofuels, with some species of microalgae being able to accumulate large quantities of lipids, precursors of biodiesel, in their biomass. The present study contributes to the investigations being undertaken by the Nucleus of Research and Development of Self-Sustainable Energy (NPDEAS) of the Federal University of Paraná, which is seeking to develop a network of technologies for the production of biomass and biodiesel from microalgae. The present study brought together, for the first time in NPDEAS, two strategies that have been proposed in the literature to increase the production of microalgal biomass and lipids. The first is the use of air enriched with pure CO2 during the period of illumination, with the aim of increasing the rate of transfer of CO2 to the liquid phase and, consequently, increasing the rate of photosynthesis. The second is the use of mixed cultures of microalgae, namely cultures originating from samples collected in natural aquatic environments that contain various microalgal species. The microalgal community within a mixed culture tends to suffer from oscillations of the relative proportions of the various species present, which can affect the quantity and composition of the biomass produced. However, none of the previous literature studies that have involved mixed cultures has addressed the question of the reproducibility of the experiments. The present study, therefore, had the aim not only of evaluating the effect of these two strategies on the production of biomass and lipids, but also of evaluating the repeatability and reproducibility of the mixed cultures. Aeration with normal atmospheric air gave linear growth at a rate of 12.mg.L-1.day-1. This was increased to a linear growth rate of 28 mg.L-1.day-1 by using air enriched with 2% (v/v) CO2. However, the results obtained in two experiments using air enriched with 5% (v/v) CO2 demonstrated the lack of reproducibility of the results: in the first experiment the linear growth rate of 32 mg.L-1.day-1 was not significantly different (alfa=0.01) from that obtained with 2% (v/v) CO2, however, in the second experiment the linear growth rate was significantly lower (alfa=0.01), 17 mg.L-1.day-1. This lack of reproducibility was also apparent in the results for the total lipid content of the dry biomass: a value of 15% was obtained with atmospheric air, air enriched with 2% (v/v) CO2 and the first experiment with air enriched with 5% (v/v) CO2, however, in the second experiment with air enriched with 5% (v/v) CO2 the value was significantly lower (alfa=0.01), 12%. On the other hand, the use of air enriched with CO2 increased the repeatability of the mixed cultures: the growth curves obtained with the replicates supplied with CO2-enriched air were closer to one another than those for the replicates supplied with normal air. The use of CO2-enriched air also decreased the fraction of flasks that suffered "collapse", namely premature death of the cells: this collapse happened in 1 in 4 flasks for cultures supplied with normal air but did not happen for flasks supplied with CO2-enriched air. In future experiments, alternative strategies for improving the reproducibility of the results could involve, firstly, an increase in the initial concentration of the inoculum and, secondly, the use of controlled mixed cultures produced by mixing several pure strains of microalgae.109f. : il. [algumas color.], grafs., tabs.application/pdfDisponível em formato digitalTesesBiodiesel - MicroalgaBiocombustíveisBiomassaEngenharia QuímicaProdução de biomassa e de lipídeos por cultivo misto de microalgas suplementado com CO2info:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisporreponame:Repositório Institucional da UFPRinstname:Universidade Federal do Paraná (UFPR)instacron:UFPRinfo:eu-repo/semantics/openAccessORIGINALR - D - ALINE BESCROVAINE PEREIRA.pdfapplication/pdf1178647https://acervodigital.ufpr.br/bitstream/1884/34502/1/R%20-%20D%20-%20ALINE%20BESCROVAINE%20PEREIRA.pdf6496d0e5a009b9cc454559f0bca2fcf1MD51open accessTEXTR - D - ALINE BESCROVAINE PEREIRA.pdf.txtExtracted Texttext/plain157140https://acervodigital.ufpr.br/bitstream/1884/34502/2/R%20-%20D%20-%20ALINE%20BESCROVAINE%20PEREIRA.pdf.txt5014e3cf02bb3ac9cd8df0d78a279a5aMD52open accessTHUMBNAILR - D - ALINE BESCROVAINE PEREIRA.pdf.jpgGenerated Thumbnailimage/jpeg1160https://acervodigital.ufpr.br/bitstream/1884/34502/3/R%20-%20D%20-%20ALINE%20BESCROVAINE%20PEREIRA.pdf.jpg400b03aede6100ffa86029abf12d3658MD53open access1884/345022021-06-09 16:23:57.934open accessoai:acervodigital.ufpr.br:1884/34502Repositório de PublicaçõesPUBhttp://acervodigital.ufpr.br/oai/requestopendoar:3082021-06-09T19:23:57Repositório Institucional da UFPR - Universidade Federal do Paraná (UFPR)false
dc.title.pt_BR.fl_str_mv Produção de biomassa e de lipídeos por cultivo misto de microalgas suplementado com CO2
title Produção de biomassa e de lipídeos por cultivo misto de microalgas suplementado com CO2
spellingShingle Produção de biomassa e de lipídeos por cultivo misto de microalgas suplementado com CO2
Pereira, Aline Bescrovaine
Teses
Biodiesel - Microalga
Biocombustíveis
Biomassa
Engenharia Química
title_short Produção de biomassa e de lipídeos por cultivo misto de microalgas suplementado com CO2
title_full Produção de biomassa e de lipídeos por cultivo misto de microalgas suplementado com CO2
title_fullStr Produção de biomassa e de lipídeos por cultivo misto de microalgas suplementado com CO2
title_full_unstemmed Produção de biomassa e de lipídeos por cultivo misto de microalgas suplementado com CO2
title_sort Produção de biomassa e de lipídeos por cultivo misto de microalgas suplementado com CO2
author Pereira, Aline Bescrovaine
author_facet Pereira, Aline Bescrovaine
author_role author
dc.contributor.other.pt_BR.fl_str_mv Mitchell, David Alexander, 1952-
Mariano, André Bellin, 1977-
Universidade Federal do Paraná. Setor de Tecnologia. Programa de Pós-Graduação em Engenharia Química
dc.contributor.author.fl_str_mv Pereira, Aline Bescrovaine
dc.subject.por.fl_str_mv Teses
Biodiesel - Microalga
Biocombustíveis
Biomassa
Engenharia Química
topic Teses
Biodiesel - Microalga
Biocombustíveis
Biomassa
Engenharia Química
description Orientador : Prof. Dr. David Alexander Mitchell
publishDate 2013
dc.date.issued.fl_str_mv 2013
dc.date.accessioned.fl_str_mv 2021-06-09T19:23:57Z
dc.date.available.fl_str_mv 2021-06-09T19:23:57Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.uri.fl_str_mv https://hdl.handle.net/1884/34502
url https://hdl.handle.net/1884/34502
dc.language.iso.fl_str_mv por
language por
dc.relation.pt_BR.fl_str_mv Disponível em formato digital
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv 109f. : il. [algumas color.], grafs., tabs.
application/pdf
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFPR
instname:Universidade Federal do Paraná (UFPR)
instacron:UFPR
instname_str Universidade Federal do Paraná (UFPR)
instacron_str UFPR
institution UFPR
reponame_str Repositório Institucional da UFPR
collection Repositório Institucional da UFPR
bitstream.url.fl_str_mv https://acervodigital.ufpr.br/bitstream/1884/34502/1/R%20-%20D%20-%20ALINE%20BESCROVAINE%20PEREIRA.pdf
https://acervodigital.ufpr.br/bitstream/1884/34502/2/R%20-%20D%20-%20ALINE%20BESCROVAINE%20PEREIRA.pdf.txt
https://acervodigital.ufpr.br/bitstream/1884/34502/3/R%20-%20D%20-%20ALINE%20BESCROVAINE%20PEREIRA.pdf.jpg
bitstream.checksum.fl_str_mv 6496d0e5a009b9cc454559f0bca2fcf1
5014e3cf02bb3ac9cd8df0d78a279a5a
400b03aede6100ffa86029abf12d3658
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
MD5
repository.name.fl_str_mv Repositório Institucional da UFPR - Universidade Federal do Paraná (UFPR)
repository.mail.fl_str_mv
_version_ 1801860243427164160