Influence of cutting speed and feed rate on the wear of an S-type mixed ceramic tool in turning of AISI 4140 hardened steel

Detalhes bibliográficos
Autor(a) principal: Nicolodi, Jéferson Hilário Wallendorff
Data de Publicação: 2019
Outros Autores: Consalter, Luiz Airton, Durán, Orlando, Souza, André João de
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UFRGS
Texto Completo: http://hdl.handle.net/10183/198942
Resumo: In this study, the performance and the useful life of a mixed ceramic tool with S-type edge microgeometry are evaluated for the case of dry turning of AISI 4140 steel hardened to 55 HRC. The influence of the cutting speed and feed rate of the cutting parameters on the tool failure was investigated. The experiments were designed and analysed using the complete factorial design technique. Our results indicate that the cutting speed and feed rate values exert significant influence on the tool lifespan. Crater and flank wear occur in all cutting conditions. The predominant tool wear mechanisms are diffusion, abrasion, and adhesion, which are also known as attrition. The tool life curve and equation were established for the machining conditions of this investigation to achieve the subsequent optimisation of this process.
id UFRGS-2_2843216d01ee8a6a8324f9534672681b
oai_identifier_str oai:www.lume.ufrgs.br:10183/198942
network_acronym_str UFRGS-2
network_name_str Repositório Institucional da UFRGS
repository_id_str
spelling Nicolodi, Jéferson Hilário WallendorffConsalter, Luiz AirtonDurán, OrlandoSouza, André João de2019-09-07T02:33:27Z20191848-6339http://hdl.handle.net/10183/198942001099242In this study, the performance and the useful life of a mixed ceramic tool with S-type edge microgeometry are evaluated for the case of dry turning of AISI 4140 steel hardened to 55 HRC. The influence of the cutting speed and feed rate of the cutting parameters on the tool failure was investigated. The experiments were designed and analysed using the complete factorial design technique. Our results indicate that the cutting speed and feed rate values exert significant influence on the tool lifespan. Crater and flank wear occur in all cutting conditions. The predominant tool wear mechanisms are diffusion, abrasion, and adhesion, which are also known as attrition. The tool life curve and equation were established for the machining conditions of this investigation to achieve the subsequent optimisation of this process.application/pdfengTechnical gazette [recurso eletrônico]. Slavonski Brod, Croácia. Vol. 26, no 4 (July 2019), p. 913-919FerramentasCerâmicaDesgasteTorneamentoAçoCeramic toolCutting parametersTool wear and lifeHardened steel turningInfluence of cutting speed and feed rate on the wear of an S-type mixed ceramic tool in turning of AISI 4140 hardened steelEstrangeiroinfo:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRGSinstname:Universidade Federal do Rio Grande do Sul (UFRGS)instacron:UFRGSTEXT001099242.pdf.txt001099242.pdf.txtExtracted Texttext/plain31083http://www.lume.ufrgs.br/bitstream/10183/198942/2/001099242.pdf.txt6b673406ec1d59ef7b6530b96806893aMD52ORIGINAL001099242.pdfTexto completo (inglês)application/pdf2180185http://www.lume.ufrgs.br/bitstream/10183/198942/1/001099242.pdfe95d08ba53d383f272a36538ee296f2eMD5110183/1989422019-09-08 02:31:09.930123oai:www.lume.ufrgs.br:10183/198942Repositório de PublicaçõesPUBhttps://lume.ufrgs.br/oai/requestopendoar:2019-09-08T05:31:09Repositório Institucional da UFRGS - Universidade Federal do Rio Grande do Sul (UFRGS)false
dc.title.pt_BR.fl_str_mv Influence of cutting speed and feed rate on the wear of an S-type mixed ceramic tool in turning of AISI 4140 hardened steel
title Influence of cutting speed and feed rate on the wear of an S-type mixed ceramic tool in turning of AISI 4140 hardened steel
spellingShingle Influence of cutting speed and feed rate on the wear of an S-type mixed ceramic tool in turning of AISI 4140 hardened steel
Nicolodi, Jéferson Hilário Wallendorff
Ferramentas
Cerâmica
Desgaste
Torneamento
Aço
Ceramic tool
Cutting parameters
Tool wear and life
Hardened steel turning
title_short Influence of cutting speed and feed rate on the wear of an S-type mixed ceramic tool in turning of AISI 4140 hardened steel
title_full Influence of cutting speed and feed rate on the wear of an S-type mixed ceramic tool in turning of AISI 4140 hardened steel
title_fullStr Influence of cutting speed and feed rate on the wear of an S-type mixed ceramic tool in turning of AISI 4140 hardened steel
title_full_unstemmed Influence of cutting speed and feed rate on the wear of an S-type mixed ceramic tool in turning of AISI 4140 hardened steel
title_sort Influence of cutting speed and feed rate on the wear of an S-type mixed ceramic tool in turning of AISI 4140 hardened steel
author Nicolodi, Jéferson Hilário Wallendorff
author_facet Nicolodi, Jéferson Hilário Wallendorff
Consalter, Luiz Airton
Durán, Orlando
Souza, André João de
author_role author
author2 Consalter, Luiz Airton
Durán, Orlando
Souza, André João de
author2_role author
author
author
dc.contributor.author.fl_str_mv Nicolodi, Jéferson Hilário Wallendorff
Consalter, Luiz Airton
Durán, Orlando
Souza, André João de
dc.subject.por.fl_str_mv Ferramentas
Cerâmica
Desgaste
Torneamento
Aço
topic Ferramentas
Cerâmica
Desgaste
Torneamento
Aço
Ceramic tool
Cutting parameters
Tool wear and life
Hardened steel turning
dc.subject.eng.fl_str_mv Ceramic tool
Cutting parameters
Tool wear and life
Hardened steel turning
description In this study, the performance and the useful life of a mixed ceramic tool with S-type edge microgeometry are evaluated for the case of dry turning of AISI 4140 steel hardened to 55 HRC. The influence of the cutting speed and feed rate of the cutting parameters on the tool failure was investigated. The experiments were designed and analysed using the complete factorial design technique. Our results indicate that the cutting speed and feed rate values exert significant influence on the tool lifespan. Crater and flank wear occur in all cutting conditions. The predominant tool wear mechanisms are diffusion, abrasion, and adhesion, which are also known as attrition. The tool life curve and equation were established for the machining conditions of this investigation to achieve the subsequent optimisation of this process.
publishDate 2019
dc.date.accessioned.fl_str_mv 2019-09-07T02:33:27Z
dc.date.issued.fl_str_mv 2019
dc.type.driver.fl_str_mv Estrangeiro
info:eu-repo/semantics/article
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10183/198942
dc.identifier.issn.pt_BR.fl_str_mv 1848-6339
dc.identifier.nrb.pt_BR.fl_str_mv 001099242
identifier_str_mv 1848-6339
001099242
url http://hdl.handle.net/10183/198942
dc.language.iso.fl_str_mv eng
language eng
dc.relation.ispartof.pt_BR.fl_str_mv Technical gazette [recurso eletrônico]. Slavonski Brod, Croácia. Vol. 26, no 4 (July 2019), p. 913-919
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFRGS
instname:Universidade Federal do Rio Grande do Sul (UFRGS)
instacron:UFRGS
instname_str Universidade Federal do Rio Grande do Sul (UFRGS)
instacron_str UFRGS
institution UFRGS
reponame_str Repositório Institucional da UFRGS
collection Repositório Institucional da UFRGS
bitstream.url.fl_str_mv http://www.lume.ufrgs.br/bitstream/10183/198942/2/001099242.pdf.txt
http://www.lume.ufrgs.br/bitstream/10183/198942/1/001099242.pdf
bitstream.checksum.fl_str_mv 6b673406ec1d59ef7b6530b96806893a
e95d08ba53d383f272a36538ee296f2e
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
repository.name.fl_str_mv Repositório Institucional da UFRGS - Universidade Federal do Rio Grande do Sul (UFRGS)
repository.mail.fl_str_mv
_version_ 1801224974190510080

Registros relacionados