A controllability-based to approach for the piezoelectric actuator design considering multimodal vibration control

• Autor(a) principal: Gonçalves, Juliano Fagundes
• Data de Publicação: 2020
• Outros Autores: Silva, Emílio Carlos Nelli, De Leon, Daniel Milbrath, Perondi, Eduardo André
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Institucional da UFRGS
• Texto Completo: http://hdl.handle.net/10183/220778
• topic: Atuador piezoelétrico; Otimização topológica; Vibrações estruturais; Topology optimization; Controllability problem; Piezoelectric material; Multimodal vibration control

This paper addresses the design problem of piezoelectric actuators for multimodal active vibration control. The design process is carried out by a topology optimization procedure which aims at maximizing a control performance index written in terms of the controllability Gramian, which is a measure that describes the ability of the actuator to move the structure from an initial condition to a desired final state in a finite time interval. The main work contribution is that independent sets of design variables are associated with each modal controllability index, then the multi-objective problem can be split into independent single-objective problems. Thus, no weighting factors are required to be tuned to give each vibration mode a suitable relevance in the optimization problem. A material interpolation scheme based on the Solid Isotropic Material with Penalization (SIMP) and the Piezoelectric Material with Penalization (PEMAP) models is employed to consider the different sets of design variables and the sensitivity analysis is carried out analytically. Numerical examples are presented by considering the design and vibration control for a cantilever beam and a beam fixed at both ends to show the efficacy of the proposed formulation. The control performance of the optimized actuators is analyzed using a Linear-Quadratic Regulator (LQR) simulation.