Evaluation of the adhesion strength of diamond films brazed on K-10 type hard metal

Detalhes bibliográficos
Autor(a) principal: Santos, Sergio Ivan dos
Data de Publicação: 2004
Outros Autores: Casanova, Carlos Alberto Medeiros, Teixeira, Cleiton Rodrigues, Balzaretti, Naira Maria, Jornada, Joao Alziro Herz da
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UFRGS
Texto Completo: http://hdl.handle.net/10183/20063
Resumo: The coating of cutting tools with diamond films considerably increases the tool performance due to the combination of the unique tribological properties of diamond with the bulk properties of the substrate (toughness). The tool performance, however, is strongly related to the adhesion strength between the film and the substrate. In this work our main goal was to propose and to test a procedure, based on a tensile strength test, to evaluate the adhesion strength of a diamond wafer brazed on a hard metal substrate, taking into account the effect of the brazing temperature and time. The temperature range studied was from 800 to 980 °C and the brazing time ranged from 3 to 40 min. The obtained results could be used to optimize the costs and time required to the production of high performance cutting tools with brazed diamond wafers.
id UFRGS-2_e506592c34e076086ce5a096344f7adf
oai_identifier_str oai:www.lume.ufrgs.br:10183/20063
network_acronym_str UFRGS-2
network_name_str Repositório Institucional da UFRGS
repository_id_str
spelling Santos, Sergio Ivan dosCasanova, Carlos Alberto MedeirosTeixeira, Cleiton RodriguesBalzaretti, Naira MariaJornada, Joao Alziro Herz da2010-04-16T09:12:51Z20041516-1439http://hdl.handle.net/10183/20063000504069The coating of cutting tools with diamond films considerably increases the tool performance due to the combination of the unique tribological properties of diamond with the bulk properties of the substrate (toughness). The tool performance, however, is strongly related to the adhesion strength between the film and the substrate. In this work our main goal was to propose and to test a procedure, based on a tensile strength test, to evaluate the adhesion strength of a diamond wafer brazed on a hard metal substrate, taking into account the effect of the brazing temperature and time. The temperature range studied was from 800 to 980 °C and the brazing time ranged from 3 to 40 min. The obtained results could be used to optimize the costs and time required to the production of high performance cutting tools with brazed diamond wafers.application/pdfengMaterials research : ibero-american journal of materials. São Carlos, SP. Vol. 7, no.2 (June 2004), p.293-297FísicaBrazingDiamondCVDAdhesion strengthCutting toolEvaluation of the adhesion strength of diamond films brazed on K-10 type hard metalinfo:eu-repo/semantics/articleinfo:eu-repo/semantics/otherinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRGSinstname:Universidade Federal do Rio Grande do Sul (UFRGS)instacron:UFRGSORIGINAL000504069.pdf000504069.pdfTexto completo (inglês)application/pdf625915http://www.lume.ufrgs.br/bitstream/10183/20063/1/000504069.pdf24477ef4e78b6a1143a214f782bcca69MD51TEXT000504069.pdf.txt000504069.pdf.txtExtracted Texttext/plain15479http://www.lume.ufrgs.br/bitstream/10183/20063/2/000504069.pdf.txt3438c37b79b5e9f511ceaad3bae31ea0MD52THUMBNAIL000504069.pdf.jpg000504069.pdf.jpgGenerated Thumbnailimage/jpeg1670http://www.lume.ufrgs.br/bitstream/10183/20063/3/000504069.pdf.jpg90baf749cdc702e9e593285f17477f80MD5310183/200632023-08-23 03:29:20.565646oai:www.lume.ufrgs.br:10183/20063Repositório de PublicaçõesPUBhttps://lume.ufrgs.br/oai/requestopendoar:2023-08-23T06:29:20Repositório Institucional da UFRGS - Universidade Federal do Rio Grande do Sul (UFRGS)false
dc.title.pt_BR.fl_str_mv Evaluation of the adhesion strength of diamond films brazed on K-10 type hard metal
title Evaluation of the adhesion strength of diamond films brazed on K-10 type hard metal
spellingShingle Evaluation of the adhesion strength of diamond films brazed on K-10 type hard metal
Santos, Sergio Ivan dos
Física
Brazing
Diamond
CVD
Adhesion strength
Cutting tool
title_short Evaluation of the adhesion strength of diamond films brazed on K-10 type hard metal
title_full Evaluation of the adhesion strength of diamond films brazed on K-10 type hard metal
title_fullStr Evaluation of the adhesion strength of diamond films brazed on K-10 type hard metal
title_full_unstemmed Evaluation of the adhesion strength of diamond films brazed on K-10 type hard metal
title_sort Evaluation of the adhesion strength of diamond films brazed on K-10 type hard metal
author Santos, Sergio Ivan dos
author_facet Santos, Sergio Ivan dos
Casanova, Carlos Alberto Medeiros
Teixeira, Cleiton Rodrigues
Balzaretti, Naira Maria
Jornada, Joao Alziro Herz da
author_role author
author2 Casanova, Carlos Alberto Medeiros
Teixeira, Cleiton Rodrigues
Balzaretti, Naira Maria
Jornada, Joao Alziro Herz da
author2_role author
author
author
author
dc.contributor.author.fl_str_mv Santos, Sergio Ivan dos
Casanova, Carlos Alberto Medeiros
Teixeira, Cleiton Rodrigues
Balzaretti, Naira Maria
Jornada, Joao Alziro Herz da
dc.subject.por.fl_str_mv Física
topic Física
Brazing
Diamond
CVD
Adhesion strength
Cutting tool
dc.subject.eng.fl_str_mv Brazing
Diamond
CVD
Adhesion strength
Cutting tool
description The coating of cutting tools with diamond films considerably increases the tool performance due to the combination of the unique tribological properties of diamond with the bulk properties of the substrate (toughness). The tool performance, however, is strongly related to the adhesion strength between the film and the substrate. In this work our main goal was to propose and to test a procedure, based on a tensile strength test, to evaluate the adhesion strength of a diamond wafer brazed on a hard metal substrate, taking into account the effect of the brazing temperature and time. The temperature range studied was from 800 to 980 °C and the brazing time ranged from 3 to 40 min. The obtained results could be used to optimize the costs and time required to the production of high performance cutting tools with brazed diamond wafers.
publishDate 2004
dc.date.issued.fl_str_mv 2004
dc.date.accessioned.fl_str_mv 2010-04-16T09:12:51Z
dc.type.driver.fl_str_mv info:eu-repo/semantics/article
info:eu-repo/semantics/other
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10183/20063
dc.identifier.issn.pt_BR.fl_str_mv 1516-1439
dc.identifier.nrb.pt_BR.fl_str_mv 000504069
identifier_str_mv 1516-1439
000504069
url http://hdl.handle.net/10183/20063
dc.language.iso.fl_str_mv eng
language eng
dc.relation.ispartof.pt_BR.fl_str_mv Materials research : ibero-american journal of materials. São Carlos, SP. Vol. 7, no.2 (June 2004), p.293-297
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFRGS
instname:Universidade Federal do Rio Grande do Sul (UFRGS)
instacron:UFRGS
instname_str Universidade Federal do Rio Grande do Sul (UFRGS)
instacron_str UFRGS
institution UFRGS
reponame_str Repositório Institucional da UFRGS
collection Repositório Institucional da UFRGS
bitstream.url.fl_str_mv http://www.lume.ufrgs.br/bitstream/10183/20063/1/000504069.pdf
http://www.lume.ufrgs.br/bitstream/10183/20063/2/000504069.pdf.txt
http://www.lume.ufrgs.br/bitstream/10183/20063/3/000504069.pdf.jpg
bitstream.checksum.fl_str_mv 24477ef4e78b6a1143a214f782bcca69
3438c37b79b5e9f511ceaad3bae31ea0
90baf749cdc702e9e593285f17477f80
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
MD5
repository.name.fl_str_mv Repositório Institucional da UFRGS - Universidade Federal do Rio Grande do Sul (UFRGS)
repository.mail.fl_str_mv
_version_ 1801224705155268608

Registros relacionados