Material flow during friction hydro-pillar processing

Detalhes bibliográficos
Autor(a) principal: Landell, Renan Mensch
Data de Publicação: 2020
Outros Autores: Kanan, Luis Fernando, Buzzatti, Diogo Trento, Vicharapu, Buchibabu, De, Amitava, Clarke, Thomas Gabriel Rosauro
Tipo de documento: Artigo
Idioma: eng
Título da fonte: Repositório Institucional da UFRGS
Texto Completo: http://hdl.handle.net/10183/222299
Resumo: Friction hydro-pillar processing (FHPP) is a novel technique that involves solid-state joining of an external plug onto a substrate by plastic deformation. A systematic investigation on material flow during FHPP is required but rarely reported. The present work reports a coupled theoretical and a three-dimensional X-ray computer tomography-based experimental study using a Ti-alloy as a tracer material to realise the material flow during FHPP of a AISI 4140 steel substrate. The cumulative results showed that the central portion of the plug deformed in a series of layerwise shear planes. However, the plasticised material towards the outer area of the plug flowed through the clearance between the plug and the substrate with excess volume moving out as flash.
id UFRGS-2_fe8da46dc7702c5d4710bc18ff9e0be0
oai_identifier_str oai:www.lume.ufrgs.br:10183/222299
network_acronym_str UFRGS-2
network_name_str Repositório Institucional da UFRGS
repository_id_str
spelling Landell, Renan MenschKanan, Luis FernandoBuzzatti, Diogo TrentoVicharapu, BuchibabuDe, AmitavaClarke, Thomas Gabriel Rosauro2021-06-16T04:38:06Z20201743-2936http://hdl.handle.net/10183/222299001126003Friction hydro-pillar processing (FHPP) is a novel technique that involves solid-state joining of an external plug onto a substrate by plastic deformation. A systematic investigation on material flow during FHPP is required but rarely reported. The present work reports a coupled theoretical and a three-dimensional X-ray computer tomography-based experimental study using a Ti-alloy as a tracer material to realise the material flow during FHPP of a AISI 4140 steel substrate. The cumulative results showed that the central portion of the plug deformed in a series of layerwise shear planes. However, the plasticised material towards the outer area of the plug flowed through the clearance between the plug and the substrate with excess volume moving out as flash.application/pdfengScience and technology of welding and joining [recurso eletrônico]. Abingdon. vol. 25, no. 3 (2020), p. 228-234Soldagem por fricçãoFluxo de materiaisSimulação numéricaFriction weldingFriction hydro-pillar processingFriction taper plug weldingMaterial flowX-ray computer tomographyNumerical simulationAISI 4140 steelTi–6Al–4VMaterial flow during friction hydro-pillar processingEstrangeiroinfo:eu-repo/semantics/articleinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRGSinstname:Universidade Federal do Rio Grande do Sul (UFRGS)instacron:UFRGSTEXT001126003.pdf.txt001126003.pdf.txtExtracted Texttext/plain30770http://www.lume.ufrgs.br/bitstream/10183/222299/2/001126003.pdf.txt70018cfa129ba69064d0463c6b3ed3a2MD52ORIGINAL001126003.pdfTexto completo (inglês)application/pdf2629458http://www.lume.ufrgs.br/bitstream/10183/222299/1/001126003.pdfa5606a341b3b89bc861738baafa443d1MD5110183/2222992021-06-26 04:45:56.429559oai:www.lume.ufrgs.br:10183/222299Repositório de PublicaçõesPUBhttps://lume.ufrgs.br/oai/requestopendoar:2021-06-26T07:45:56Repositório Institucional da UFRGS - Universidade Federal do Rio Grande do Sul (UFRGS)false
dc.title.pt_BR.fl_str_mv Material flow during friction hydro-pillar processing
title Material flow during friction hydro-pillar processing
spellingShingle Material flow during friction hydro-pillar processing
Landell, Renan Mensch
Soldagem por fricção
Fluxo de materiais
Simulação numérica
Friction welding
Friction hydro-pillar processing
Friction taper plug welding
Material flow
X-ray computer tomography
Numerical simulation
AISI 4140 steel
Ti–6Al–4V
title_short Material flow during friction hydro-pillar processing
title_full Material flow during friction hydro-pillar processing
title_fullStr Material flow during friction hydro-pillar processing
title_full_unstemmed Material flow during friction hydro-pillar processing
title_sort Material flow during friction hydro-pillar processing
author Landell, Renan Mensch
author_facet Landell, Renan Mensch
Kanan, Luis Fernando
Buzzatti, Diogo Trento
Vicharapu, Buchibabu
De, Amitava
Clarke, Thomas Gabriel Rosauro
author_role author
author2 Kanan, Luis Fernando
Buzzatti, Diogo Trento
Vicharapu, Buchibabu
De, Amitava
Clarke, Thomas Gabriel Rosauro
author2_role author
author
author
author
author
dc.contributor.author.fl_str_mv Landell, Renan Mensch
Kanan, Luis Fernando
Buzzatti, Diogo Trento
Vicharapu, Buchibabu
De, Amitava
Clarke, Thomas Gabriel Rosauro
dc.subject.por.fl_str_mv Soldagem por fricção
Fluxo de materiais
Simulação numérica
topic Soldagem por fricção
Fluxo de materiais
Simulação numérica
Friction welding
Friction hydro-pillar processing
Friction taper plug welding
Material flow
X-ray computer tomography
Numerical simulation
AISI 4140 steel
Ti–6Al–4V
dc.subject.eng.fl_str_mv Friction welding
Friction hydro-pillar processing
Friction taper plug welding
Material flow
X-ray computer tomography
Numerical simulation
AISI 4140 steel
Ti–6Al–4V
description Friction hydro-pillar processing (FHPP) is a novel technique that involves solid-state joining of an external plug onto a substrate by plastic deformation. A systematic investigation on material flow during FHPP is required but rarely reported. The present work reports a coupled theoretical and a three-dimensional X-ray computer tomography-based experimental study using a Ti-alloy as a tracer material to realise the material flow during FHPP of a AISI 4140 steel substrate. The cumulative results showed that the central portion of the plug deformed in a series of layerwise shear planes. However, the plasticised material towards the outer area of the plug flowed through the clearance between the plug and the substrate with excess volume moving out as flash.
publishDate 2020
dc.date.issued.fl_str_mv 2020
dc.date.accessioned.fl_str_mv 2021-06-16T04:38:06Z
dc.type.driver.fl_str_mv Estrangeiro
info:eu-repo/semantics/article
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
format article
status_str publishedVersion
dc.identifier.uri.fl_str_mv http://hdl.handle.net/10183/222299
dc.identifier.issn.pt_BR.fl_str_mv 1743-2936
dc.identifier.nrb.pt_BR.fl_str_mv 001126003
identifier_str_mv 1743-2936
001126003
url http://hdl.handle.net/10183/222299
dc.language.iso.fl_str_mv eng
language eng
dc.relation.ispartof.pt_BR.fl_str_mv Science and technology of welding and joining [recurso eletrônico]. Abingdon. vol. 25, no. 3 (2020), p. 228-234
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFRGS
instname:Universidade Federal do Rio Grande do Sul (UFRGS)
instacron:UFRGS
instname_str Universidade Federal do Rio Grande do Sul (UFRGS)
instacron_str UFRGS
institution UFRGS
reponame_str Repositório Institucional da UFRGS
collection Repositório Institucional da UFRGS
bitstream.url.fl_str_mv http://www.lume.ufrgs.br/bitstream/10183/222299/2/001126003.pdf.txt
http://www.lume.ufrgs.br/bitstream/10183/222299/1/001126003.pdf
bitstream.checksum.fl_str_mv 70018cfa129ba69064d0463c6b3ed3a2
a5606a341b3b89bc861738baafa443d1
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
repository.name.fl_str_mv Repositório Institucional da UFRGS - Universidade Federal do Rio Grande do Sul (UFRGS)
repository.mail.fl_str_mv
_version_ 1801225021205512192

Registros relacionados