Análise de superfícies seletivas de freqüência para aplicações em ondas milimétricas
Autor(a) principal: | |
---|---|
Data de Publicação: | 2001 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFRN |
Texto Completo: | https://repositorio.ufrn.br/jspui/handle/123456789/15234 |
Resumo: | This work consists in the development of a theoretical and numerical analysis for frequency selective surfaces (FSS) structures with conducting patch elements, such as rectangular patches, thin dipoles and cross dipoles, on anisotropic dielectric substrates. The analysis is developed for millimeter wave band applications. The analytical formulation is developed in the spectral domain, by using a rigorous technique known as equivalent transmission line method, or immitance approach. The numerical analysis is completed through the use of the Galerkin's technique in the Fourier transform domain, using entire-domain basis functions. In the last decades, several sophisticated analytical techniques have been developed for FSS structure applications. Within these applications, it can be emphasized the use of FSS structures on reflecting antennas and bandpass radomes. In the analysis, the scattered fields of the FSS geometry are related to the surface induced currents on the conducting patches. After the formulation of the scattering problem, the numerical solution is obtained by using the moment method. The choice of the basis functions plays a very important role in the numerical efficiency of the numerical method, once they should provide a very good approximation to the real current distributions on the FSS analyzed structure. Thereafter, the dyadic Green's function components are obtained in order to evaluate the basis functions unknown coefficients. To accomplish that, the Galerkin's numerical technique is used. Completing the formulation, the incident fields are determined through the incident potential, and as a consequence the FSS transmission and reflection characteristics are determined, as function of the resonant frequency and structural parameters. The main objective of this work was to analyze FSS structures with conducting patch elements, such as thin dipoles, cross dipoles and rectangular patches, on anisotropic dielectric substrates, for high frequency applications. Therefore, numerical results for the FSS structure main characteristics were obtained in the millimeter wave bando Some of these FSS characteristics are the resonant |
id |
UFRN_2eb4c89e6edc54307f7cbb5a8a8f9d89 |
---|---|
oai_identifier_str |
oai:https://repositorio.ufrn.br:123456789/15234 |
network_acronym_str |
UFRN |
network_name_str |
Repositório Institucional da UFRN |
repository_id_str |
|
spelling |
Medeiros, Gilcarlos Ribeiro dehttp://lattes.cnpq.br/2047205140995222Campos, Antônio Luiz Pereira de Siqueirahttp://lattes.cnpq.br/1982228057731254Albuquerque, Maria Rosa Medeiros Lins dehttp://lattes.cnpq.br/4546157125717070Gomes Neto, Alfrêdohttp://lattes.cnpq.br/1403715441701958D'assunção, Adaildo Gomes2014-12-17T14:55:16Z2009-06-242014-12-17T14:55:16Z2001-09-24MEDEIROS, Gilcarlos Ribeiro de. Análise de superfícies seletivas de freqüência para aplicações em ondas milimétricas. 2001. 70 f. Dissertação (Mestrado em Automação e Sistemas; Engenharia de Computação; Telecomunicações) - Universidade Federal do Rio Grande do Norte, Natal, 2001.https://repositorio.ufrn.br/jspui/handle/123456789/15234This work consists in the development of a theoretical and numerical analysis for frequency selective surfaces (FSS) structures with conducting patch elements, such as rectangular patches, thin dipoles and cross dipoles, on anisotropic dielectric substrates. The analysis is developed for millimeter wave band applications. The analytical formulation is developed in the spectral domain, by using a rigorous technique known as equivalent transmission line method, or immitance approach. The numerical analysis is completed through the use of the Galerkin's technique in the Fourier transform domain, using entire-domain basis functions. In the last decades, several sophisticated analytical techniques have been developed for FSS structure applications. Within these applications, it can be emphasized the use of FSS structures on reflecting antennas and bandpass radomes. In the analysis, the scattered fields of the FSS geometry are related to the surface induced currents on the conducting patches. After the formulation of the scattering problem, the numerical solution is obtained by using the moment method. The choice of the basis functions plays a very important role in the numerical efficiency of the numerical method, once they should provide a very good approximation to the real current distributions on the FSS analyzed structure. Thereafter, the dyadic Green's function components are obtained in order to evaluate the basis functions unknown coefficients. To accomplish that, the Galerkin's numerical technique is used. Completing the formulation, the incident fields are determined through the incident potential, and as a consequence the FSS transmission and reflection characteristics are determined, as function of the resonant frequency and structural parameters. The main objective of this work was to analyze FSS structures with conducting patch elements, such as thin dipoles, cross dipoles and rectangular patches, on anisotropic dielectric substrates, for high frequency applications. Therefore, numerical results for the FSS structure main characteristics were obtained in the millimeter wave bando Some of these FSS characteristics are the resonantEste trabalho consiste na análise teórica e numérica de superfícies seletiva de freqüência com elementos do tipo patch retangular, dipolo fino e dipolo cruzado sobre substratos dielétricos anisotrópicos, para a faixa de freqüências de ondas milimétricas. A formulação analítica é realizada por uma técnica de abordagem do domínio espectral conhecido como método de linha de transmissão equivalente ou método da imitância. A análise numérica é solucionada através do uso da técnica numérica de Galerkin no domínio da transformada de Fourier, utilizando-se funções de base de domínio inteiro. Nas últimas décadas, muitas aplicações e técnicas analíticas sofisticadas têm sido desenvolvidas para a caracterização das FSS. Dentre as aplicações, pode-se destacar a utilização de FSS em antenas refletoras e em redomes passa-faixa. Primeiramente relaciona-se os campos espalhados da FSS com as correntes superficiais induzidas na patch. Após a dedução realizada para o problema de espalhamento, pode-se obter a solução numérica da mesma através do método dos momentos. A escolha das funções de base é de grande importância para a eficiência numérica do método, devendo se aproximar ao máximo das características física das distribuições de corrente na estrutura analisadaapplication/pdfporUniversidade Federal do Rio Grande do NortePrograma de Pós-Graduação em Engenharia ElétricaUFRNBRAutomação e Sistemas; Engenharia de Computação; TelecomunicaçõesEngenharia elétricaSuperfície seletiva de freqüênciaEspelhamento de ondasParâmetros de transmissão e reflexão de FSSCNPQ::ENGENHARIAS::ENGENHARIA ELETRICAAnálise de superfícies seletivas de freqüência para aplicações em ondas milimétricasinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRNinstname:Universidade Federal do Rio Grande do Norte (UFRN)instacron:UFRNORIGINALGilcarlosRM_DISSERT.pdfGilcarlosRM_DISSERT.pdfapplication/pdf18631428https://repositorio.ufrn.br/bitstream/123456789/15234/1/GilcarlosRM_DISSERT.pdf385965b15957e91a27e4a39422fc37d6MD51TEXTGilcarlosRM_DISSERT.pdf.txtGilcarlosRM_DISSERT.pdf.txtExtracted texttext/plain70https://repositorio.ufrn.br/bitstream/123456789/15234/6/GilcarlosRM_DISSERT.pdf.txt68d68d77aad497352e6fe64c6a747e85MD56THUMBNAILGilcarlosRM_DISSERT.pdf.jpgGilcarlosRM_DISSERT.pdf.jpgIM Thumbnailimage/jpeg4671https://repositorio.ufrn.br/bitstream/123456789/15234/7/GilcarlosRM_DISSERT.pdf.jpgf6493da5047da6d055e069ba9924fa9aMD57123456789/152342017-11-02 08:19:04.084oai:https://repositorio.ufrn.br:123456789/15234Repositório de PublicaçõesPUBhttp://repositorio.ufrn.br/oai/opendoar:2017-11-02T11:19:04Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)false |
dc.title.por.fl_str_mv |
Análise de superfícies seletivas de freqüência para aplicações em ondas milimétricas |
title |
Análise de superfícies seletivas de freqüência para aplicações em ondas milimétricas |
spellingShingle |
Análise de superfícies seletivas de freqüência para aplicações em ondas milimétricas Medeiros, Gilcarlos Ribeiro de Engenharia elétrica Superfície seletiva de freqüência Espelhamento de ondas Parâmetros de transmissão e reflexão de FSS CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
title_short |
Análise de superfícies seletivas de freqüência para aplicações em ondas milimétricas |
title_full |
Análise de superfícies seletivas de freqüência para aplicações em ondas milimétricas |
title_fullStr |
Análise de superfícies seletivas de freqüência para aplicações em ondas milimétricas |
title_full_unstemmed |
Análise de superfícies seletivas de freqüência para aplicações em ondas milimétricas |
title_sort |
Análise de superfícies seletivas de freqüência para aplicações em ondas milimétricas |
author |
Medeiros, Gilcarlos Ribeiro de |
author_facet |
Medeiros, Gilcarlos Ribeiro de |
author_role |
author |
dc.contributor.authorID.por.fl_str_mv |
|
dc.contributor.authorLattes.por.fl_str_mv |
http://lattes.cnpq.br/2047205140995222 |
dc.contributor.advisorID.por.fl_str_mv |
|
dc.contributor.advisor-co1ID.por.fl_str_mv |
|
dc.contributor.referees1.pt_BR.fl_str_mv |
Albuquerque, Maria Rosa Medeiros Lins de |
dc.contributor.referees1ID.por.fl_str_mv |
|
dc.contributor.referees1Lattes.por.fl_str_mv |
http://lattes.cnpq.br/4546157125717070 |
dc.contributor.referees2.pt_BR.fl_str_mv |
Gomes Neto, Alfrêdo |
dc.contributor.referees2ID.por.fl_str_mv |
|
dc.contributor.referees2Lattes.por.fl_str_mv |
http://lattes.cnpq.br/1403715441701958 |
dc.contributor.author.fl_str_mv |
Medeiros, Gilcarlos Ribeiro de |
dc.contributor.advisor-co1.fl_str_mv |
Campos, Antônio Luiz Pereira de Siqueira |
dc.contributor.advisor-co1Lattes.fl_str_mv |
http://lattes.cnpq.br/1982228057731254 |
dc.contributor.advisor1.fl_str_mv |
D'assunção, Adaildo Gomes |
contributor_str_mv |
Campos, Antônio Luiz Pereira de Siqueira D'assunção, Adaildo Gomes |
dc.subject.por.fl_str_mv |
Engenharia elétrica Superfície seletiva de freqüência Espelhamento de ondas Parâmetros de transmissão e reflexão de FSS |
topic |
Engenharia elétrica Superfície seletiva de freqüência Espelhamento de ondas Parâmetros de transmissão e reflexão de FSS CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
description |
This work consists in the development of a theoretical and numerical analysis for frequency selective surfaces (FSS) structures with conducting patch elements, such as rectangular patches, thin dipoles and cross dipoles, on anisotropic dielectric substrates. The analysis is developed for millimeter wave band applications. The analytical formulation is developed in the spectral domain, by using a rigorous technique known as equivalent transmission line method, or immitance approach. The numerical analysis is completed through the use of the Galerkin's technique in the Fourier transform domain, using entire-domain basis functions. In the last decades, several sophisticated analytical techniques have been developed for FSS structure applications. Within these applications, it can be emphasized the use of FSS structures on reflecting antennas and bandpass radomes. In the analysis, the scattered fields of the FSS geometry are related to the surface induced currents on the conducting patches. After the formulation of the scattering problem, the numerical solution is obtained by using the moment method. The choice of the basis functions plays a very important role in the numerical efficiency of the numerical method, once they should provide a very good approximation to the real current distributions on the FSS analyzed structure. Thereafter, the dyadic Green's function components are obtained in order to evaluate the basis functions unknown coefficients. To accomplish that, the Galerkin's numerical technique is used. Completing the formulation, the incident fields are determined through the incident potential, and as a consequence the FSS transmission and reflection characteristics are determined, as function of the resonant frequency and structural parameters. The main objective of this work was to analyze FSS structures with conducting patch elements, such as thin dipoles, cross dipoles and rectangular patches, on anisotropic dielectric substrates, for high frequency applications. Therefore, numerical results for the FSS structure main characteristics were obtained in the millimeter wave bando Some of these FSS characteristics are the resonant |
publishDate |
2001 |
dc.date.issued.fl_str_mv |
2001-09-24 |
dc.date.available.fl_str_mv |
2009-06-24 2014-12-17T14:55:16Z |
dc.date.accessioned.fl_str_mv |
2014-12-17T14:55:16Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
MEDEIROS, Gilcarlos Ribeiro de. Análise de superfícies seletivas de freqüência para aplicações em ondas milimétricas. 2001. 70 f. Dissertação (Mestrado em Automação e Sistemas; Engenharia de Computação; Telecomunicações) - Universidade Federal do Rio Grande do Norte, Natal, 2001. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufrn.br/jspui/handle/123456789/15234 |
identifier_str_mv |
MEDEIROS, Gilcarlos Ribeiro de. Análise de superfícies seletivas de freqüência para aplicações em ondas milimétricas. 2001. 70 f. Dissertação (Mestrado em Automação e Sistemas; Engenharia de Computação; Telecomunicações) - Universidade Federal do Rio Grande do Norte, Natal, 2001. |
url |
https://repositorio.ufrn.br/jspui/handle/123456789/15234 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Elétrica |
dc.publisher.initials.fl_str_mv |
UFRN |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Automação e Sistemas; Engenharia de Computação; Telecomunicações |
publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFRN instname:Universidade Federal do Rio Grande do Norte (UFRN) instacron:UFRN |
instname_str |
Universidade Federal do Rio Grande do Norte (UFRN) |
instacron_str |
UFRN |
institution |
UFRN |
reponame_str |
Repositório Institucional da UFRN |
collection |
Repositório Institucional da UFRN |
bitstream.url.fl_str_mv |
https://repositorio.ufrn.br/bitstream/123456789/15234/1/GilcarlosRM_DISSERT.pdf https://repositorio.ufrn.br/bitstream/123456789/15234/6/GilcarlosRM_DISSERT.pdf.txt https://repositorio.ufrn.br/bitstream/123456789/15234/7/GilcarlosRM_DISSERT.pdf.jpg |
bitstream.checksum.fl_str_mv |
385965b15957e91a27e4a39422fc37d6 68d68d77aad497352e6fe64c6a747e85 f6493da5047da6d055e069ba9924fa9a |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN) |
repository.mail.fl_str_mv |
|
_version_ |
1802117684498792448 |