Morfologia e propriedades mecânicas da fibra de sisal unidirecional e em sobreposição de compósito com resina epóxi
Autor(a) principal: | |
---|---|
Data de Publicação: | 2013 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFRN |
Texto Completo: | https://repositorio.ufrn.br/jspui/handle/123456789/15708 |
Resumo: | The composites manufactured with long fibres aligned in a single direction, and overlay has been shown to have better performance than the short fibers randomly distributed. In particular, the lignocellulosic fibers extracted from the sisal leaves, used in conjunction with the epoxy resin has attracted the attention of many researchers because the final properties of the system formed. In this work composites based on epoxy resin reinforced with sisal fibers were manufactured. The sisal fibres were treated with an alkaline solution of 0.06 mol/l NaOH. The treated, and untreated fibres were subjected to tension x extension tests. The composites were manufactured in the "Lossy" mold with the specifications of the samples to be produced (300x20x4 mm). The tension tests were carried out in accordance with the ASTM standards 3039 (for the composite aligned in a single direction) and ASTM D5573 (for composites in overlay), three point bending tests were performed according to ASTM D790. Analyzing the results of the tests of tension and three point bending tests, it was observed that the composites with the configuration of overlapping had the better elastic module in both tests. As to the maximum resistance to tension, the best result was the composites aligned in a single direction. Tests of absorption of water and micrographs are in progress |
id |
UFRN_a1325ded575e7a08a857b4f690fc166d |
---|---|
oai_identifier_str |
oai:https://repositorio.ufrn.br:123456789/15708 |
network_acronym_str |
UFRN |
network_name_str |
Repositório Institucional da UFRN |
repository_id_str |
|
spelling |
Holanda, Elisângela Bezerra das Neveshttp://lattes.cnpq.br/7320648381268215http://lattes.cnpq.br/8553209522282182Felipe, Maria Goretehttp://lattes.cnpq.br/3151683042790067Nascimento, José Heriberto Oliveira dohttp://lattes.cnpq.br/7033735079037677Souza, Roberto Silva dehttp://lattes.cnpq.br/4012782800846844Ladchumananandasivam, Rasiah2014-12-17T14:58:21Z2014-01-072014-12-17T14:58:21Z2013-01-14HOLANDA, Elisângela Bezerra das Neves. Morphology and mechanical properties of the fiber and overlapping unidirectional composite with epoxy resin. 2013. 82 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2013.https://repositorio.ufrn.br/jspui/handle/123456789/15708The composites manufactured with long fibres aligned in a single direction, and overlay has been shown to have better performance than the short fibers randomly distributed. In particular, the lignocellulosic fibers extracted from the sisal leaves, used in conjunction with the epoxy resin has attracted the attention of many researchers because the final properties of the system formed. In this work composites based on epoxy resin reinforced with sisal fibers were manufactured. The sisal fibres were treated with an alkaline solution of 0.06 mol/l NaOH. The treated, and untreated fibres were subjected to tension x extension tests. The composites were manufactured in the "Lossy" mold with the specifications of the samples to be produced (300x20x4 mm). The tension tests were carried out in accordance with the ASTM standards 3039 (for the composite aligned in a single direction) and ASTM D5573 (for composites in overlay), three point bending tests were performed according to ASTM D790. Analyzing the results of the tests of tension and three point bending tests, it was observed that the composites with the configuration of overlapping had the better elastic module in both tests. As to the maximum resistance to tension, the best result was the composites aligned in a single direction. Tests of absorption of water and micrographs are in progressOs compósitos fabricados com fibras longas alinhadas unidirecionalmente e em sobreposição tem demonstrado que possuem melhor desempenho do que as fibras cortadas aleatoriamente distribuídas. Em especial, as fibras lignocelulósicas extraídas do sisal, utilizadas em conjunto com a resina epóxi tem atraído a atenção de muitos pesquisadores devido às propriedades finais do sistema formado. No presente trabalho foram fabricados compósitos à base de resina epóxi reforçado com fibras de sisal. As fibras de sisal foram submetidas ao tratamento alcalino com NaOH a 0,06 mol/l, em seguida submetidas ao ensaio de tração na fibra tratada e não tratada. Os compósitos foram fabricados no molde denominado de Lossy (molde com perdas) usinado de acordo com as especificações das amostras a serem produzidas (300x20x4 mm). Os ensaios de tração foram realizados de acordo com as normas ASTM 3039 (Para os compósitos alinhados unidirecionalmente) e ASTM D5573 (Para os compósitos em sobreposição), os ensaios de flexão em três pontos foram realizados de acordo com as normas ASTM D 790. Analisando os resultados dos ensaios de tração e flexão em três pontos, foram observados que os compósitos com a configuração de sobreposição teve melhor módulo de elasticidade em ambos os ensaios. Quanto a resistência máxima a tração o melhor resultado foi do compósito alinhado unidirecionalmente. No ensaio de absorção de água foi observado que os compósitos possuem um nível muito baixo de absorção e o compósito alinhado unidirecionalmente obteve percentual de saturação de 1,97 %. Nas micrografias, se observa as regiões de ruptura/trincas do compósito e seu comportamento (fibra/matriz)Coordenação de Aperfeiçoamento de Pessoal de Nível Superiorapplication/pdfporUniversidade Federal do Rio Grande do NortePrograma de Pós-Graduação em Engenharia MecânicaUFRNBRTecnologia de Materiais; Projetos Mecânicos; TermociênciasFibra de sisal. Resina epóxi. Compósito alinhado unidirecionalmenteSisal fibre. Epoxy resin. Unidirectional aligned compositesCNPQ::ENGENHARIAS::ENGENHARIA MECANICAMorfologia e propriedades mecânicas da fibra de sisal unidirecional e em sobreposição de compósito com resina epóxiMorphology and mechanical properties of the fiber and overlapping unidirectional composite with epoxy resininfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRNinstname:Universidade Federal do Rio Grande do Norte (UFRN)instacron:UFRNORIGINALElisangelaBNH_DISSERT.pdfapplication/pdf5500408https://repositorio.ufrn.br/bitstream/123456789/15708/1/ElisangelaBNH_DISSERT.pdf312e914c2b5560a38c07ef6f6b3c70beMD51TEXTElisangelaBNH_DISSERT.pdf.txtElisangelaBNH_DISSERT.pdf.txtExtracted texttext/plain108218https://repositorio.ufrn.br/bitstream/123456789/15708/6/ElisangelaBNH_DISSERT.pdf.txt7ed6b86e28d784d0c7aa583b20995d06MD56THUMBNAILElisangelaBNH_DISSERT.pdf.jpgElisangelaBNH_DISSERT.pdf.jpgIM Thumbnailimage/jpeg2701https://repositorio.ufrn.br/bitstream/123456789/15708/7/ElisangelaBNH_DISSERT.pdf.jpg85105481dbe97233327e15dc4829dad7MD57123456789/157082017-11-02 01:00:44.77oai:https://repositorio.ufrn.br:123456789/15708Repositório de PublicaçõesPUBhttp://repositorio.ufrn.br/oai/opendoar:2017-11-02T04:00:44Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)false |
dc.title.por.fl_str_mv |
Morfologia e propriedades mecânicas da fibra de sisal unidirecional e em sobreposição de compósito com resina epóxi |
dc.title.alternative.eng.fl_str_mv |
Morphology and mechanical properties of the fiber and overlapping unidirectional composite with epoxy resin |
title |
Morfologia e propriedades mecânicas da fibra de sisal unidirecional e em sobreposição de compósito com resina epóxi |
spellingShingle |
Morfologia e propriedades mecânicas da fibra de sisal unidirecional e em sobreposição de compósito com resina epóxi Holanda, Elisângela Bezerra das Neves Fibra de sisal. Resina epóxi. Compósito alinhado unidirecionalmente Sisal fibre. Epoxy resin. Unidirectional aligned composites CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
title_short |
Morfologia e propriedades mecânicas da fibra de sisal unidirecional e em sobreposição de compósito com resina epóxi |
title_full |
Morfologia e propriedades mecânicas da fibra de sisal unidirecional e em sobreposição de compósito com resina epóxi |
title_fullStr |
Morfologia e propriedades mecânicas da fibra de sisal unidirecional e em sobreposição de compósito com resina epóxi |
title_full_unstemmed |
Morfologia e propriedades mecânicas da fibra de sisal unidirecional e em sobreposição de compósito com resina epóxi |
title_sort |
Morfologia e propriedades mecânicas da fibra de sisal unidirecional e em sobreposição de compósito com resina epóxi |
author |
Holanda, Elisângela Bezerra das Neves |
author_facet |
Holanda, Elisângela Bezerra das Neves |
author_role |
author |
dc.contributor.authorID.por.fl_str_mv |
|
dc.contributor.authorLattes.por.fl_str_mv |
http://lattes.cnpq.br/7320648381268215 |
dc.contributor.advisorID.por.fl_str_mv |
|
dc.contributor.advisorLattes.por.fl_str_mv |
http://lattes.cnpq.br/8553209522282182 |
dc.contributor.referees1.pt_BR.fl_str_mv |
Felipe, Maria Gorete |
dc.contributor.referees1ID.por.fl_str_mv |
|
dc.contributor.referees1Lattes.por.fl_str_mv |
http://lattes.cnpq.br/3151683042790067 |
dc.contributor.referees2.pt_BR.fl_str_mv |
Nascimento, José Heriberto Oliveira do |
dc.contributor.referees2ID.por.fl_str_mv |
|
dc.contributor.referees2Lattes.por.fl_str_mv |
http://lattes.cnpq.br/7033735079037677 |
dc.contributor.referees3.pt_BR.fl_str_mv |
Souza, Roberto Silva de |
dc.contributor.referees3ID.por.fl_str_mv |
|
dc.contributor.referees3Lattes.por.fl_str_mv |
http://lattes.cnpq.br/4012782800846844 |
dc.contributor.author.fl_str_mv |
Holanda, Elisângela Bezerra das Neves |
dc.contributor.advisor1.fl_str_mv |
Ladchumananandasivam, Rasiah |
contributor_str_mv |
Ladchumananandasivam, Rasiah |
dc.subject.por.fl_str_mv |
Fibra de sisal. Resina epóxi. Compósito alinhado unidirecionalmente |
topic |
Fibra de sisal. Resina epóxi. Compósito alinhado unidirecionalmente Sisal fibre. Epoxy resin. Unidirectional aligned composites CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
dc.subject.eng.fl_str_mv |
Sisal fibre. Epoxy resin. Unidirectional aligned composites |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA MECANICA |
description |
The composites manufactured with long fibres aligned in a single direction, and overlay has been shown to have better performance than the short fibers randomly distributed. In particular, the lignocellulosic fibers extracted from the sisal leaves, used in conjunction with the epoxy resin has attracted the attention of many researchers because the final properties of the system formed. In this work composites based on epoxy resin reinforced with sisal fibers were manufactured. The sisal fibres were treated with an alkaline solution of 0.06 mol/l NaOH. The treated, and untreated fibres were subjected to tension x extension tests. The composites were manufactured in the "Lossy" mold with the specifications of the samples to be produced (300x20x4 mm). The tension tests were carried out in accordance with the ASTM standards 3039 (for the composite aligned in a single direction) and ASTM D5573 (for composites in overlay), three point bending tests were performed according to ASTM D790. Analyzing the results of the tests of tension and three point bending tests, it was observed that the composites with the configuration of overlapping had the better elastic module in both tests. As to the maximum resistance to tension, the best result was the composites aligned in a single direction. Tests of absorption of water and micrographs are in progress |
publishDate |
2013 |
dc.date.issued.fl_str_mv |
2013-01-14 |
dc.date.accessioned.fl_str_mv |
2014-12-17T14:58:21Z |
dc.date.available.fl_str_mv |
2014-01-07 2014-12-17T14:58:21Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.citation.fl_str_mv |
HOLANDA, Elisângela Bezerra das Neves. Morphology and mechanical properties of the fiber and overlapping unidirectional composite with epoxy resin. 2013. 82 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2013. |
dc.identifier.uri.fl_str_mv |
https://repositorio.ufrn.br/jspui/handle/123456789/15708 |
identifier_str_mv |
HOLANDA, Elisângela Bezerra das Neves. Morphology and mechanical properties of the fiber and overlapping unidirectional composite with epoxy resin. 2013. 82 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2013. |
url |
https://repositorio.ufrn.br/jspui/handle/123456789/15708 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.publisher.program.fl_str_mv |
Programa de Pós-Graduação em Engenharia Mecânica |
dc.publisher.initials.fl_str_mv |
UFRN |
dc.publisher.country.fl_str_mv |
BR |
dc.publisher.department.fl_str_mv |
Tecnologia de Materiais; Projetos Mecânicos; Termociências |
publisher.none.fl_str_mv |
Universidade Federal do Rio Grande do Norte |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFRN instname:Universidade Federal do Rio Grande do Norte (UFRN) instacron:UFRN |
instname_str |
Universidade Federal do Rio Grande do Norte (UFRN) |
instacron_str |
UFRN |
institution |
UFRN |
reponame_str |
Repositório Institucional da UFRN |
collection |
Repositório Institucional da UFRN |
bitstream.url.fl_str_mv |
https://repositorio.ufrn.br/bitstream/123456789/15708/1/ElisangelaBNH_DISSERT.pdf https://repositorio.ufrn.br/bitstream/123456789/15708/6/ElisangelaBNH_DISSERT.pdf.txt https://repositorio.ufrn.br/bitstream/123456789/15708/7/ElisangelaBNH_DISSERT.pdf.jpg |
bitstream.checksum.fl_str_mv |
312e914c2b5560a38c07ef6f6b3c70be 7ed6b86e28d784d0c7aa583b20995d06 85105481dbe97233327e15dc4829dad7 |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN) |
repository.mail.fl_str_mv |
|
_version_ |
1802117746429788160 |