Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo

Detalhes bibliográficos
Autor(a) principal: Bezerra, Luciano André Cruz
Data de Publicação: 2003
Tipo de documento: Dissertação
Idioma: por
Título da fonte: Repositório Institucional da UFRN
Texto Completo: https://repositorio.ufrn.br/jspui/handle/123456789/15548
Resumo: In the last decades there was a concentrate effort of researchers in the search for options to the problem of the continuity of city development and environmental preservation. The recycling and reuse of materials in industry have been considerate as the best option to sustainable development. One of the relevant aspects in this case refers to the rational use of electrical energy. At this point, the role of engineering is to conceive new processes and materials, with the objective of reducing energy consumption and maintaining, at the same time the benefits of the technology. In this context, the objective of the present research is to analyze quantitatively the thermal behavior of walls constructed with concrete blocks which composition aggregates the expanded polystyrene (EPS) reused in the shape of flakes and in the shape of a board, resulting in a “light concrete”. Experiments were conducted, systematically, with a wall (considerate as a standard) constructed with blocks of ordinary concrete; two walls constructed with blocks of light concrete, distinct by the proportion of EPS/sand; a wall of ceramic bricks (“eight holes” type) and a wall with ordinary blocks of cement, in a way to obtain a comparative analysis of the thermal behavior of the systems. Others tests conducted with the blocks were: stress analysis and thermal properties analysis (ρ, cp e k). Based on the results, it was possible to establish quantitative relationship between the concentration (density) of EPS in the constructive elements and the decreasing of the heat transfer rate, that also changes the others thermal properties of the material, as was proved. It was observed that the walls of light concrete presents better thermal behavior compared with the other two constructive systems world wide used. Based in the results of the investigation, there was shown the viability of the use of EPS as aggregate (raw material) in the composition of the concrete, with the objective of the fabrication of blocks to non-structural masonry that works as a thermal insulation in buildings. A direct consequence of this result is the possibility of reduction of the consume of the electrical energy used to climatization of buildings. Other aspect of the investigation that must be pointed was the reuse of the EPS as a raw material to civil construction, with a clear benefit to reducing of environmental problems
id UFRN_acdad252290265866b09a2d2bd2677ea
oai_identifier_str oai:https://repositorio.ufrn.br:123456789/15548
network_acronym_str UFRN
network_name_str Repositório Institucional da UFRN
repository_id_str
spelling Bezerra, Luciano André Cruzhttp://lattes.cnpq.br/1653820021437677http://lattes.cnpq.br/0490476694313938Lopes, Wilza Gomes Reishttp://lattes.cnpq.br/2455108901174407Melo, José Daniel Dinizhttp://lattes.cnpq.br/6572298923055649Mendes, José Ubiragi de Limahttp://lattes.cnpq.br/7103009428184656Marinho, George dos Santos2014-12-17T14:57:46Z2006-10-312014-12-17T14:57:46Z2003-10-31BEZERRA, Luciano André Cruz. Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo. 2003. 64 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2003.https://repositorio.ufrn.br/jspui/handle/123456789/15548In the last decades there was a concentrate effort of researchers in the search for options to the problem of the continuity of city development and environmental preservation. The recycling and reuse of materials in industry have been considerate as the best option to sustainable development. One of the relevant aspects in this case refers to the rational use of electrical energy. At this point, the role of engineering is to conceive new processes and materials, with the objective of reducing energy consumption and maintaining, at the same time the benefits of the technology. In this context, the objective of the present research is to analyze quantitatively the thermal behavior of walls constructed with concrete blocks which composition aggregates the expanded polystyrene (EPS) reused in the shape of flakes and in the shape of a board, resulting in a “light concrete”. Experiments were conducted, systematically, with a wall (considerate as a standard) constructed with blocks of ordinary concrete; two walls constructed with blocks of light concrete, distinct by the proportion of EPS/sand; a wall of ceramic bricks (“eight holes” type) and a wall with ordinary blocks of cement, in a way to obtain a comparative analysis of the thermal behavior of the systems. Others tests conducted with the blocks were: stress analysis and thermal properties analysis (ρ, cp e k). Based on the results, it was possible to establish quantitative relationship between the concentration (density) of EPS in the constructive elements and the decreasing of the heat transfer rate, that also changes the others thermal properties of the material, as was proved. It was observed that the walls of light concrete presents better thermal behavior compared with the other two constructive systems world wide used. Based in the results of the investigation, there was shown the viability of the use of EPS as aggregate (raw material) in the composition of the concrete, with the objective of the fabrication of blocks to non-structural masonry that works as a thermal insulation in buildings. A direct consequence of this result is the possibility of reduction of the consume of the electrical energy used to climatization of buildings. Other aspect of the investigation that must be pointed was the reuse of the EPS as a raw material to civil construction, with a clear benefit to reducing of environmental problemsNas últimas décadas têm sido grandes os esforços dos pesquisadores na busca por mais informações e conhecimentos sobre como se poderá continuar provendo o desenvolvimento das cidades sem que isso ocorra de forma agressiva ao meio ambiente. A reciclagem e o reaproveitamento de materiais que ainda possuem grande potencial de aplicabilidade são vistos como as soluções mais evidentes em direção ao desenvolvimento sustentável. Um dos aspectos mais relevantes desse desenvolvimento refere-se ao uso racional da energia elétrica. E aqui se insere a Engenharia, com o papel de conceber técnicas e materiais inovadores cujo principal objetivo seja o de reduzir o consumo de energia elétrica, sem que obrigatoriamente se tenha que abrir mão das comodidades conseguidas com sua aplicação. Neste contexto, a presente pesquisa teve o objetivo de analisar de forma quantitativa o desempenho térmico de paredes construídas com blocos de concreto cuja composição agrega o poliestireno expandido (EPS) reaproveitado na forma de flocos e em placas, constituindo desse modo um concreto leve. Realizaram-se experimentos, sistematicamente, com uma parede construída com blocos de concreto comum, considerada como referência; duas paredes com blocos de concreto leve, distintas pelas proporções de EPS/areia; uma parede com tijolos cerâmicos de oito furos e uma com blocos de cimento vazados, de forma a proceder-se com a analise comparativa dos desempenhos térmicos dos sistemas construtivos. Foram realizados ainda, ensaios de resistência à compressão e ensaios de determinação das propriedades termofísicas (ρ, cp e k) dos blocos de concreto. Os resultados permitiram relacionar quantitativamente o efeito do EPS como agregado em elementos construtivos na redução da taxa de transferência de calor em função da variação de densidade, que também interfere nas outras propriedades térmicas e mecânicas do material, como comprovado. Constatou-se que as paredes de concreto leve apresentaram melhor desempenho térmico do que os outros dois sistemas construtivos consagrados comercialmente. Pôde-se concluir que é viável empregar-se o EPS reaproveitado como material constituinte da mistura para concreto, com a finalidade de fabricar alvenaria de vedação capaz de comportar-se também como isolante térmico entre o meio externo e o interno das edificações. Uma conseqüência direta disto é a redução do consumo de energia elétrica utilizada pelos sistemas de climatização, sem comprometer a situação de conforto térmico experimentada pelo usuário. Destaca-se ainda que o reaproveitamento do EPS como material de construção contribui com a redução dos problemas ambientais causados por este material. Além disso, os resultados obtidos neste estudo podem servir como referência aos projetistas na hora da escolha do material que irá compor a alvenaria de vedação, e assim poderem adequar os seus projetos às situações mais desejáveisConselho Nacional de Desenvolvimento Científico e Tecnológicoapplication/pdfporUniversidade Federal do Rio Grande do NortePrograma de Pós-Graduação em Engenharia MecânicaUFRNBRTecnologia de Materiais; Projetos Mecânicos; TermociênciasDesempenho térmicoEPSSistema construtivo alternativoThermal behaviorEPSAlternative constructive systemCNPQ::ENGENHARIAS::ENGENHARIA MECANICAAnálise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdoinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisinfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFRNinstname:Universidade Federal do Rio Grande do Norte (UFRN)instacron:UFRNORIGINALLucianoACB.pdfapplication/pdf490237https://repositorio.ufrn.br/bitstream/123456789/15548/1/LucianoACB.pdf162902433fcb2f6694977b9d544adc6eMD51TEXTLucianoACB.pdf.txtLucianoACB.pdf.txtExtracted texttext/plain97582https://repositorio.ufrn.br/bitstream/123456789/15548/6/LucianoACB.pdf.txt248c99b64697d58e57d0551912ea82b3MD56THUMBNAILLucianoACB.pdf.jpgLucianoACB.pdf.jpgIM Thumbnailimage/jpeg2277https://repositorio.ufrn.br/bitstream/123456789/15548/7/LucianoACB.pdf.jpgb1a0954bb7789750080a32c7efd3777eMD57123456789/155482017-11-01 09:11:23.064oai:https://repositorio.ufrn.br:123456789/15548Repositório de PublicaçõesPUBhttp://repositorio.ufrn.br/oai/opendoar:2017-11-01T12:11:23Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)false
dc.title.por.fl_str_mv Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo
title Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo
spellingShingle Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo
Bezerra, Luciano André Cruz
Desempenho térmico
EPS
Sistema construtivo alternativo
Thermal behavior
EPS
Alternative constructive system
CNPQ::ENGENHARIAS::ENGENHARIA MECANICA
title_short Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo
title_full Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo
title_fullStr Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo
title_full_unstemmed Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo
title_sort Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo
author Bezerra, Luciano André Cruz
author_facet Bezerra, Luciano André Cruz
author_role author
dc.contributor.authorID.por.fl_str_mv
dc.contributor.authorLattes.por.fl_str_mv http://lattes.cnpq.br/1653820021437677
dc.contributor.advisorID.por.fl_str_mv
dc.contributor.advisorLattes.por.fl_str_mv http://lattes.cnpq.br/0490476694313938
dc.contributor.referees1.pt_BR.fl_str_mv Lopes, Wilza Gomes Reis
dc.contributor.referees1ID.por.fl_str_mv
dc.contributor.referees1Lattes.por.fl_str_mv http://lattes.cnpq.br/2455108901174407
dc.contributor.referees2.pt_BR.fl_str_mv Melo, José Daniel Diniz
dc.contributor.referees2ID.por.fl_str_mv
dc.contributor.referees2Lattes.por.fl_str_mv http://lattes.cnpq.br/6572298923055649
dc.contributor.referees3.pt_BR.fl_str_mv Mendes, José Ubiragi de Lima
dc.contributor.referees3ID.por.fl_str_mv
dc.contributor.referees3Lattes.por.fl_str_mv http://lattes.cnpq.br/7103009428184656
dc.contributor.author.fl_str_mv Bezerra, Luciano André Cruz
dc.contributor.advisor1.fl_str_mv Marinho, George dos Santos
contributor_str_mv Marinho, George dos Santos
dc.subject.por.fl_str_mv Desempenho térmico
EPS
Sistema construtivo alternativo
topic Desempenho térmico
EPS
Sistema construtivo alternativo
Thermal behavior
EPS
Alternative constructive system
CNPQ::ENGENHARIAS::ENGENHARIA MECANICA
dc.subject.eng.fl_str_mv Thermal behavior
EPS
Alternative constructive system
dc.subject.cnpq.fl_str_mv CNPQ::ENGENHARIAS::ENGENHARIA MECANICA
description In the last decades there was a concentrate effort of researchers in the search for options to the problem of the continuity of city development and environmental preservation. The recycling and reuse of materials in industry have been considerate as the best option to sustainable development. One of the relevant aspects in this case refers to the rational use of electrical energy. At this point, the role of engineering is to conceive new processes and materials, with the objective of reducing energy consumption and maintaining, at the same time the benefits of the technology. In this context, the objective of the present research is to analyze quantitatively the thermal behavior of walls constructed with concrete blocks which composition aggregates the expanded polystyrene (EPS) reused in the shape of flakes and in the shape of a board, resulting in a “light concrete”. Experiments were conducted, systematically, with a wall (considerate as a standard) constructed with blocks of ordinary concrete; two walls constructed with blocks of light concrete, distinct by the proportion of EPS/sand; a wall of ceramic bricks (“eight holes” type) and a wall with ordinary blocks of cement, in a way to obtain a comparative analysis of the thermal behavior of the systems. Others tests conducted with the blocks were: stress analysis and thermal properties analysis (ρ, cp e k). Based on the results, it was possible to establish quantitative relationship between the concentration (density) of EPS in the constructive elements and the decreasing of the heat transfer rate, that also changes the others thermal properties of the material, as was proved. It was observed that the walls of light concrete presents better thermal behavior compared with the other two constructive systems world wide used. Based in the results of the investigation, there was shown the viability of the use of EPS as aggregate (raw material) in the composition of the concrete, with the objective of the fabrication of blocks to non-structural masonry that works as a thermal insulation in buildings. A direct consequence of this result is the possibility of reduction of the consume of the electrical energy used to climatization of buildings. Other aspect of the investigation that must be pointed was the reuse of the EPS as a raw material to civil construction, with a clear benefit to reducing of environmental problems
publishDate 2003
dc.date.issued.fl_str_mv 2003-10-31
dc.date.available.fl_str_mv 2006-10-31
2014-12-17T14:57:46Z
dc.date.accessioned.fl_str_mv 2014-12-17T14:57:46Z
dc.type.status.fl_str_mv info:eu-repo/semantics/publishedVersion
dc.type.driver.fl_str_mv info:eu-repo/semantics/masterThesis
format masterThesis
status_str publishedVersion
dc.identifier.citation.fl_str_mv BEZERRA, Luciano André Cruz. Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo. 2003. 64 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2003.
dc.identifier.uri.fl_str_mv https://repositorio.ufrn.br/jspui/handle/123456789/15548
identifier_str_mv BEZERRA, Luciano André Cruz. Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo. 2003. 64 f. Dissertação (Mestrado em Tecnologia de Materiais; Projetos Mecânicos; Termociências) - Universidade Federal do Rio Grande do Norte, Natal, 2003.
url https://repositorio.ufrn.br/jspui/handle/123456789/15548
dc.language.iso.fl_str_mv por
language por
dc.rights.driver.fl_str_mv info:eu-repo/semantics/openAccess
eu_rights_str_mv openAccess
dc.format.none.fl_str_mv application/pdf
dc.publisher.none.fl_str_mv Universidade Federal do Rio Grande do Norte
dc.publisher.program.fl_str_mv Programa de Pós-Graduação em Engenharia Mecânica
dc.publisher.initials.fl_str_mv UFRN
dc.publisher.country.fl_str_mv BR
dc.publisher.department.fl_str_mv Tecnologia de Materiais; Projetos Mecânicos; Termociências
publisher.none.fl_str_mv Universidade Federal do Rio Grande do Norte
dc.source.none.fl_str_mv reponame:Repositório Institucional da UFRN
instname:Universidade Federal do Rio Grande do Norte (UFRN)
instacron:UFRN
instname_str Universidade Federal do Rio Grande do Norte (UFRN)
instacron_str UFRN
institution UFRN
reponame_str Repositório Institucional da UFRN
collection Repositório Institucional da UFRN
bitstream.url.fl_str_mv https://repositorio.ufrn.br/bitstream/123456789/15548/1/LucianoACB.pdf
https://repositorio.ufrn.br/bitstream/123456789/15548/6/LucianoACB.pdf.txt
https://repositorio.ufrn.br/bitstream/123456789/15548/7/LucianoACB.pdf.jpg
bitstream.checksum.fl_str_mv 162902433fcb2f6694977b9d544adc6e
248c99b64697d58e57d0551912ea82b3
b1a0954bb7789750080a32c7efd3777e
bitstream.checksumAlgorithm.fl_str_mv MD5
MD5
MD5
repository.name.fl_str_mv Repositório Institucional da UFRN - Universidade Federal do Rio Grande do Norte (UFRN)
repository.mail.fl_str_mv
_version_ 1802117496369577984