Otimização da injeção cíclica de vapor em reservatório de óleo pesado

• Autor(a) principal: Queiroz, Gertrudes Oliveira de
• Data de Publicação: 2005
• Tipo de documento: Dissertação
• Idioma: por
• Título da fonte: Repositório Institucional da UFRN
• Texto Completo: https://repositorio.ufrn.br/jspui/handle/123456789/15788
• topic: Injeção cíclica de vapor; Estimulação cíclica; Métodos térmicos de recuperação de petróleo; Óleo pesado; Simulação de reservatório; Cyclic steam Injection; Huff and puff; Cyclic stimulation; EOR; Heavy oil; Reservoir simulation; CNPQ::ENGENHARIAS::ENGENHARIA QUIMICA

Thermal methods made heavy oil production possible in fields where primary recovery failed. Throughout the years steam injection became one of the most important alternatives to increase heavy oil recovery. There are many types of steam injection, and one of them is the cyclic steam injection, which has been used with success in several countries, including Brazil. The process involves three phases: firstly, steam is injected, inside of the producing well; secondly, the well is closed (soak period); and finally, the well is put back into production. These steps constitute one cycle. The cycle is repeated several times until economical production limit is reached. Usually, independent of reservoir type, as the number of cycles increases the cyclic injection turns less efficient. This work aims to analyze rock and reservoir property influence in the cyclic steam injection. The objective was to study the ideal number of cycles and, consequently, process optimization. Simulations were realized using the STARS simulator from the CMG group based in a proposed reservoir model. It was observed that the reservoir thickness was the most important parameter in the process performance, whilst soaking time influence was not significant