Porous materials obtained by acid treatment processing followed by pillaring of montmorillonite clays

• Autor(a) principal: Bieseki, Lindiane
• Data de Publicação: 2013
• Outros Autores: Treichel, Helen, Araujo, Antonio S., Pergher, Sibele Berenice Castellã
• Tipo de documento: Artigo
• Idioma: eng
• Título da fonte: Repositório Institucional da UFRN
• Texto Completo: https://repositorio.ufrn.br/jspui/handle/123456789/29395
• topic: Montmorillonite clay; Acid treatment; Pillaring

Montmorillonite clay was treated with hydrochloric acid and subsequently pillared with aluminum polyoxocations. The acid-treated samples were evaluated for the removal of structural elements (Al, Fe and Mg) and for conservation of the lamellar organization. The more severe the treatment, the greater the specific area obtained. Despite the loss of structural organization, all samples were pillared, with a displacement of peak (001) to 2θ lower angles. The pillaring of all acid-treated samples promoted an increase in the specific area of these materials. Pillared samples previously treated at 50 °C with HCl concentrations of 2 and 4 mol L− 1 underwent an increase in their specific areas of approximately 45%. Pillared samples treated with 4 mol L− 1 of HCl at 80 °C underwent the lowest percent increase in surface area, approximately 10%, compared to the untreated samples. All samples possessed greater uniformity in pore size. Acid treatment prior to pillaring promoted an increase in the number of acid sites of moderate strength compared to pillared natural clay.