Controle de vibrações mecânicas tipo "stick slip" em colunas de perfuração
Autor(a) principal: | |
---|---|
Data de Publicação: | 2013 |
Tipo de documento: | Dissertação |
Idioma: | por |
Título da fonte: | Repositório Institucional da UFS |
Texto Completo: | https://ri.ufs.br/handle/riufs/5011 |
Resumo: | Mechanical vibrations are inevitable in drilling operations. Torsional stick-slip vibrations are vibrations that occur in drilling columns, which are produced by periodic variations of torque and characterized by large fluctuations in the speed of the drill bit. These vibrations are dangerous, primarily by the cyclical characteristic of the phenomenon that by the amplitude of the same, which can cause fatigue of the pipe, failures in the components of the drill string, deformations in the walls of the well, excessive wear of the drill, low rate of penetration, and collapse of the drilling process. The frequency of these unwanted oscillations can be reduced by the application of automatic control techniques. The objective of this study is to evaluate through numerical simulations, the application of conventional control techniques, such as proportional-integral control (PI), and nonlinear, as the sliding mode control (SMC) and the input-output linearization control (IOLC), to eliminate the presence of stick-slip oscillation in drilling columns. The controllers are designed primarily to maintain a constant speed of rotation system, by manipulating engine torque, thereby inferentially control the speed of the drill, thus providing optimum operation conditions, beyond preserving system stability. Results of simulations using drill string torsional models of two degrees of freedom (2-DOF) and four degrees of freedom (4-DOF) show the performance of the proposed control systems, which are analyzed and qualitatively compared. |
id |
UFS-2_0509f048b4cda222b278f3f659eccd64 |
---|---|
oai_identifier_str |
oai:ufs.br:riufs/5011 |
network_acronym_str |
UFS-2 |
network_name_str |
Repositório Institucional da UFS |
repository_id_str |
|
spelling |
Arcieri, Michael Angel Santoshttp://lattes.cnpq.br/1912760278010301Sotomayor, Oscar Alberto Zanabriahttp://lattes.cnpq.br/12073278601899652017-09-26T18:08:10Z2017-09-26T18:08:10Z2013-03-08https://ri.ufs.br/handle/riufs/5011Mechanical vibrations are inevitable in drilling operations. Torsional stick-slip vibrations are vibrations that occur in drilling columns, which are produced by periodic variations of torque and characterized by large fluctuations in the speed of the drill bit. These vibrations are dangerous, primarily by the cyclical characteristic of the phenomenon that by the amplitude of the same, which can cause fatigue of the pipe, failures in the components of the drill string, deformations in the walls of the well, excessive wear of the drill, low rate of penetration, and collapse of the drilling process. The frequency of these unwanted oscillations can be reduced by the application of automatic control techniques. The objective of this study is to evaluate through numerical simulations, the application of conventional control techniques, such as proportional-integral control (PI), and nonlinear, as the sliding mode control (SMC) and the input-output linearization control (IOLC), to eliminate the presence of stick-slip oscillation in drilling columns. The controllers are designed primarily to maintain a constant speed of rotation system, by manipulating engine torque, thereby inferentially control the speed of the drill, thus providing optimum operation conditions, beyond preserving system stability. Results of simulations using drill string torsional models of two degrees of freedom (2-DOF) and four degrees of freedom (4-DOF) show the performance of the proposed control systems, which are analyzed and qualitatively compared.Vibrações mecânicas são inevitáveis nas operações de perfuração. Vibrações torcionais stick-slip são vibrações que ocorrem em colunas de perfuração, as quais são produzidas pelas variações periódicas de torque e caracterizadas por grandes oscilações da velocidade da broca. Estas vibrações são prejudiciais, mais pela característica cíclica do fenômeno que pela amplitude da mesma, podendo originar fadiga da tubulação, falhas nos componentes da coluna de perfuração, deformações nas paredes do poço, desgaste excessivo da broca, baixa taxa de penetração e, inclusive, colapso do processo de perfuração. A frequência destas oscilações indesejadas pode ser reduzida pela aplicação de técnicas de controle automático. O objetivo deste trabalho é avaliar, mediante simulações numéricas, a aplicação de técnicas de controle convencional, como o controle proporcional-integral (PI), e não linear, como o controle por modos deslizantes (SMC) e o controle por linearização entrada-saída (IOLC) para eliminar a presença de oscilações stick-slip em colunas de perfuração. Os controladores são desenvolvidos principalmente para manter constante a velocidade do sistema de rotação, mediante a manipulação do torque do motor, para assim controlar inferencialmente a velocidade da broca, fornecendo desta maneira condições ótimas de operação, além de preservar a estabilidade do sistema. Resultados das simulações, usando modelos torcionais de uma coluna de perfuração de dois graus de liberdade (2-DOF) e de quatro graus de liberdade (4-DOF), mostram o desempenho dos sistemas de controle propostos, os quais são analisados e comparados qualitativamente.application/pdfporBritadoresPoços de petróleo - PerfuraçãoVibraçãoMáquinas de perfuração - VibraçãoColuna de perfuraçãoFenômeno stick-slipControle PIControle por modos deslizantesControle por linearização entrada-saídaBoring machineryOil well drillingRock-drillsVibrationDrill stringStick-slip phenomenonPI controlSliding mode controlControl by input-output linearizationCNPQ::ENGENHARIAS::ENGENHARIA ELETRICAControle de vibrações mecânicas tipo "stick slip" em colunas de perfuraçãoinfo:eu-repo/semantics/publishedVersioninfo:eu-repo/semantics/masterThesisPós-Graduação em Engenharia Elétricainfo:eu-repo/semantics/openAccessreponame:Repositório Institucional da UFSinstname:Universidade Federal de Sergipe (UFS)instacron:UFSORIGINALMICHAEL_ANGEL_SANTOS_ARCIERI.pdfapplication/pdf1655308https://ri.ufs.br/jspui/bitstream/riufs/5011/1/MICHAEL_ANGEL_SANTOS_ARCIERI.pdf424ff901eb1d2d81d15f9b9ec6851f8eMD51TEXTMICHAEL_ANGEL_SANTOS_ARCIERI.pdf.txtMICHAEL_ANGEL_SANTOS_ARCIERI.pdf.txtExtracted texttext/plain149167https://ri.ufs.br/jspui/bitstream/riufs/5011/2/MICHAEL_ANGEL_SANTOS_ARCIERI.pdf.txtef303fc52244d57e9a5faf310a4c36ccMD52THUMBNAILMICHAEL_ANGEL_SANTOS_ARCIERI.pdf.jpgMICHAEL_ANGEL_SANTOS_ARCIERI.pdf.jpgGenerated Thumbnailimage/jpeg1328https://ri.ufs.br/jspui/bitstream/riufs/5011/3/MICHAEL_ANGEL_SANTOS_ARCIERI.pdf.jpgd3be37fb76fb10355aa464012e2d81ccMD53riufs/50112017-11-27 21:38:17.761oai:ufs.br:riufs/5011Repositório InstitucionalPUBhttps://ri.ufs.br/oai/requestrepositorio@academico.ufs.bropendoar:2017-11-28T00:38:17Repositório Institucional da UFS - Universidade Federal de Sergipe (UFS)false |
dc.title.por.fl_str_mv |
Controle de vibrações mecânicas tipo "stick slip" em colunas de perfuração |
title |
Controle de vibrações mecânicas tipo "stick slip" em colunas de perfuração |
spellingShingle |
Controle de vibrações mecânicas tipo "stick slip" em colunas de perfuração Arcieri, Michael Angel Santos Britadores Poços de petróleo - Perfuração Vibração Máquinas de perfuração - Vibração Coluna de perfuração Fenômeno stick-slip Controle PI Controle por modos deslizantes Controle por linearização entrada-saída Boring machinery Oil well drilling Rock-drills Vibration Drill string Stick-slip phenomenon PI control Sliding mode control Control by input-output linearization CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
title_short |
Controle de vibrações mecânicas tipo "stick slip" em colunas de perfuração |
title_full |
Controle de vibrações mecânicas tipo "stick slip" em colunas de perfuração |
title_fullStr |
Controle de vibrações mecânicas tipo "stick slip" em colunas de perfuração |
title_full_unstemmed |
Controle de vibrações mecânicas tipo "stick slip" em colunas de perfuração |
title_sort |
Controle de vibrações mecânicas tipo "stick slip" em colunas de perfuração |
author |
Arcieri, Michael Angel Santos |
author_facet |
Arcieri, Michael Angel Santos |
author_role |
author |
dc.contributor.author.fl_str_mv |
Arcieri, Michael Angel Santos |
dc.contributor.advisor1Lattes.fl_str_mv |
http://lattes.cnpq.br/1912760278010301 |
dc.contributor.advisor1.fl_str_mv |
Sotomayor, Oscar Alberto Zanabria |
dc.contributor.authorLattes.fl_str_mv |
http://lattes.cnpq.br/1207327860189965 |
contributor_str_mv |
Sotomayor, Oscar Alberto Zanabria |
dc.subject.por.fl_str_mv |
Britadores Poços de petróleo - Perfuração Vibração Máquinas de perfuração - Vibração Coluna de perfuração Fenômeno stick-slip Controle PI Controle por modos deslizantes Controle por linearização entrada-saída |
topic |
Britadores Poços de petróleo - Perfuração Vibração Máquinas de perfuração - Vibração Coluna de perfuração Fenômeno stick-slip Controle PI Controle por modos deslizantes Controle por linearização entrada-saída Boring machinery Oil well drilling Rock-drills Vibration Drill string Stick-slip phenomenon PI control Sliding mode control Control by input-output linearization CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
dc.subject.eng.fl_str_mv |
Boring machinery Oil well drilling Rock-drills Vibration Drill string Stick-slip phenomenon PI control Sliding mode control Control by input-output linearization |
dc.subject.cnpq.fl_str_mv |
CNPQ::ENGENHARIAS::ENGENHARIA ELETRICA |
description |
Mechanical vibrations are inevitable in drilling operations. Torsional stick-slip vibrations are vibrations that occur in drilling columns, which are produced by periodic variations of torque and characterized by large fluctuations in the speed of the drill bit. These vibrations are dangerous, primarily by the cyclical characteristic of the phenomenon that by the amplitude of the same, which can cause fatigue of the pipe, failures in the components of the drill string, deformations in the walls of the well, excessive wear of the drill, low rate of penetration, and collapse of the drilling process. The frequency of these unwanted oscillations can be reduced by the application of automatic control techniques. The objective of this study is to evaluate through numerical simulations, the application of conventional control techniques, such as proportional-integral control (PI), and nonlinear, as the sliding mode control (SMC) and the input-output linearization control (IOLC), to eliminate the presence of stick-slip oscillation in drilling columns. The controllers are designed primarily to maintain a constant speed of rotation system, by manipulating engine torque, thereby inferentially control the speed of the drill, thus providing optimum operation conditions, beyond preserving system stability. Results of simulations using drill string torsional models of two degrees of freedom (2-DOF) and four degrees of freedom (4-DOF) show the performance of the proposed control systems, which are analyzed and qualitatively compared. |
publishDate |
2013 |
dc.date.issued.fl_str_mv |
2013-03-08 |
dc.date.accessioned.fl_str_mv |
2017-09-26T18:08:10Z |
dc.date.available.fl_str_mv |
2017-09-26T18:08:10Z |
dc.type.status.fl_str_mv |
info:eu-repo/semantics/publishedVersion |
dc.type.driver.fl_str_mv |
info:eu-repo/semantics/masterThesis |
format |
masterThesis |
status_str |
publishedVersion |
dc.identifier.uri.fl_str_mv |
https://ri.ufs.br/handle/riufs/5011 |
url |
https://ri.ufs.br/handle/riufs/5011 |
dc.language.iso.fl_str_mv |
por |
language |
por |
dc.rights.driver.fl_str_mv |
info:eu-repo/semantics/openAccess |
eu_rights_str_mv |
openAccess |
dc.format.none.fl_str_mv |
application/pdf |
dc.publisher.program.fl_str_mv |
Pós-Graduação em Engenharia Elétrica |
dc.source.none.fl_str_mv |
reponame:Repositório Institucional da UFS instname:Universidade Federal de Sergipe (UFS) instacron:UFS |
instname_str |
Universidade Federal de Sergipe (UFS) |
instacron_str |
UFS |
institution |
UFS |
reponame_str |
Repositório Institucional da UFS |
collection |
Repositório Institucional da UFS |
bitstream.url.fl_str_mv |
https://ri.ufs.br/jspui/bitstream/riufs/5011/1/MICHAEL_ANGEL_SANTOS_ARCIERI.pdf https://ri.ufs.br/jspui/bitstream/riufs/5011/2/MICHAEL_ANGEL_SANTOS_ARCIERI.pdf.txt https://ri.ufs.br/jspui/bitstream/riufs/5011/3/MICHAEL_ANGEL_SANTOS_ARCIERI.pdf.jpg |
bitstream.checksum.fl_str_mv |
424ff901eb1d2d81d15f9b9ec6851f8e ef303fc52244d57e9a5faf310a4c36cc d3be37fb76fb10355aa464012e2d81cc |
bitstream.checksumAlgorithm.fl_str_mv |
MD5 MD5 MD5 |
repository.name.fl_str_mv |
Repositório Institucional da UFS - Universidade Federal de Sergipe (UFS) |
repository.mail.fl_str_mv |
repositorio@academico.ufs.br |
_version_ |
1802110835697385472 |