Manufacturing and analysis of the compression resistance of an alternative material for sustainable masonry from foundry sand and plastic.

• Autor(a) principal: Lassen, Ângela
• Data de Publicação: 2023
• Outros Autores: Gramville, Ana Júlia Martins, Jantsch, Nadine, Dessoy, Laura Valentini, Lopes, Diorges Carlos
• Tipo de documento: Artigo
• Idioma: por
• Título da fonte: Repositório Institucional da UFSC
• Texto Completo: https://repositorio.ufsc.br/handle/123456789/247881
• topic: Masonry; Polypropylene; Foundry sand.

Foundry is an agile process in obtaining finished metal parts, where for each ton of sand that enters the process, an equivalent amount of waste is generated. And plastic is a widely used polymer due to its low cost and diverse application in all sectors of society, however, it has an insufficient recycling system. In this context, through this work, technical tests were carried out with artisanal production and empirical dosages, aiming at the use of these two residues, plastic and foundry sand, as raw material for an alternative material for use in masonry. The result obtained was satisfactory where all the test specimens exceeded the resistance of 6 MPa with regard to the axial compression tests, presenting itself as a possible option for the reuse of these residues.